journal article·2016-03

Silica-decorated mesoporous TiO2 continuous fibers: preparation, structures and properties

W. W. Qin, L. Y. Zhu

Publisher page

Abstract

SiO2-decorated mesoporous TiO2 continuous fibers were prepared by one-pot polyorganometal method. The structures and some properties of the fibers were studied and characterized by XRD, FTIR, SEM, DRS and so on. The results show that the Ti–O–Si chemical bond was formed, which led to higher thermal stability and suppressed the growth of anatase. The fiber, heat-treated under steam atmosphere at 600 °C/2 h, has the specific surface area value of 228.7 m2 g−1 for Si/Ti = 0.3 (mol ratio), which displays the highest photoactivity of all samples. The degradation rate of methyl orange aqueous solution was 99.5 and 94.5 % after 60 min under UV irradiation and after 3 h under solar irradiation, respectively. Furthermore, it was worthwhile to mention that the degradation efficiency was also more than 90 % after six cycles. The TiO2/SiO2 fibers, composed of nanoparticles about 20–50 nm and Ti–O–Si chemical bond, with high surface area and photocatalytic activity were successfully large-scale-fabricated by a sol–gel method, which have great potential applications such as catalysis, separations and absorption.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Catalytic Processes in Materials Science

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. Dutoit DCM, Schneider M, Baiker A (1995) Titania–silica mixed oxides: I. influence of sol–gel and drying conditions on structural properties. J Catal 153:165–17610.1006/jcat.1995.1118 ↗
2. Dutoit DCM, Göbel U, Schneider M, Baiker A (1996) Titania–silica mixed oxides: V. effect of sol–gel and drying conditions on surface properties. J Catal 164:433–43910.1006/jcat.1996.0399 ↗
3. Davis RJ, Liu Z (1997) Titania–silica: A model binary oxide catalyst system. Chem Mater 9:2311–232410.1021/cm970314u ↗
4. Kang TS, Smith AP, Taylor BE, Durstock MF (2009) Fabrication of highly-ordered TiO2 nanotube arrays and their use in dye-sensitized solar cells. Nano Lett 9:601–60610.1021/nl802818d ↗
5. Kobayashi S, Hanabusa K, Suzuki M, Kimura M, Shirai H (1999) Preparation of TiO2 fiber in a sol–gel system containing organogelator. Chem Lett 28:1077–107810.1246/cl.1999.1077 ↗
6. Guo CW, Cao Y, Dai WL, Fan KN, Deng JF (2002) Fabrication of high surface area fibrous TiO2 with well-defined mesostructures via a nonsurfactant approach. Chem Lett 31:588–58910.1246/cl.2002.588 ↗
7. Puma GL, Puddu V, Tsang HK, Gora A, Toepfer B (2010) Photocatalytic oxidation of multicomponent mixtures of estrogens (estrone (E1), 17β-estradiol (E2), 17α-ethynylestradiol (EE2) and estriol (E3)) under UVA and UVC radiation: photon absorption, quantum yields and rate constants independent of photon absorption. Appl Catal B 99:388–39710.1016/j.apcatb.2010.05.015 ↗
8. Gao B, Chen GZ, Puma GL (2009) Carbon nanotubes/titanium dioxide (CNTs/TiO2) nanocomposites prepared by conventional and novel surfactant wrapping sol–gel methods exhibiting enhanced photocatalytic activity. Appl Catal B 89:503–50910.1016/j.apcatb.2009.01.009 ↗
9. Yin S, Sato T (2000) Synthesis and photocatalytic properties of fibrous titania prepared from protonic layered tetratitanate precursor in supercritical alcohols. Ind Eng Chem Res 39:4526–453010.1021/ie000165g ↗
10. Varghese OK, Paulose M, Grimes CA (2009) Long vertically aligned titania nanotubes on transparent conducting oxide for highly efficient solar cells. Nat Nanotechnol 4:592–59710.1038/nnano.2009.226 ↗
11. Mohapatra SK, Misra M, Mahajan VK, Raja KSJ (2007) Design of a highly efficient photoelectrolytic cell for hydrogen generation by water splitting: application of TiO2–xCx nanotubes as a photoanode and Pt/TiO2 nanotubes as a cathode. J Phys Chem C 111:8677–868510.1021/jp071906v ↗
12. Varghese OK, Paulose M, LaTempa TJ, Grimes CA (2009) High-rate solar photocatalytic conversion of CO2 and water vapor to hydrocarbon fuels. Nano Lett 9:731–73710.1021/nl803258p ↗
13. Kamiya K, Yokoo T, Tanimoto K (1987) Titania fiber, method for producing the fiber and method for using the fiber. JP patent no. 62223323
14. Chen YF, Lee CY, Yeng MY, Chiu HT (2003) Preparing titanium oxide with various morphologies. Mater Chem Phys 81:39–4410.1016/S0254-0584(03)00100-7 ↗
15. Tekmen C, Suslu A, Cocen U (2008) Titania nanofibers prepared by electrospinning. Mater Lett 62:4470–447210.1016/j.matlet.2008.08.002 ↗
16. Zhu LY, Yu G, Wang XQ, Xu D (2009) Preparation and characterization of TiO2 fiber with a facile polyorganotitanium precursor method. J Colloid Interface Sci 336:438–44210.1016/j.jcis.2009.03.077 ↗
17. Dutt SM, Frost RL, Bell JM (1998) Fourier transform raman spectroscopy of gels derived from modified tetra(-n-butoxy)zirconium (IV). AIP Conf Proc 430:674–67710.1063/1.55750 ↗
18. Shibata H, Ohkubo T, Kohno H, Rangsunvigit P, Sakai H, Abe M (2006) Preparation and photocatalytic activity of titania particulate film with mesostructured silica as binder. J Photochem Photobiol A 181:357–36210.1016/j.jphotochem.2005.12.018 ↗
19. Ishikawa T, Yamaoka H, Harada Y, Fujii T, Nagasawa T (2002) A general process for in situ formation of functional surface layers on ceramics. Nature 416:64–6710.1038/416064a ↗
20. Liu ZF, Tabora J, Davis RJ (1994) Relationships between microstructure and surface acidity of Ti–Si mixed oxide catalysts. J Catal 149:117–12610.1006/jcat.1994.1277 ↗
21. Gao XT, Wachs IE (1999) Titania–silica as catalysts: molecular structural characteristics and physico-chemical properties. Catal Today 51:233–25410.1016/S0920-5861(99)00048-6 ↗
22. Music S, Gotic M, Ivanda M, Popovic S, Turkovic A, Trojko R, Sekulic A, Furic K (1997) microstructural properties of TiO2 synthesized by sol–gel procedure. Mater Sci Eng B 47:33–4010.1016/S0921-5107(96)02041-7 ↗
23. Schraml-Marth M, Walther KL, Wokaum A, Handy BE, Baiker A (1992) Porous silica gels and TiO2/SiO2 mixed oxides prepared via the sol–gel process: characterization by spectroscopic techniques. J Non-Cryst Solids 143:93–11110.1016/S0022-3093(05)80557-5 ↗
24. Krishna KR, Bell AT (1991) An isotopic tracer study of the deactivation of Ru/TiO2 catalysts during Fischer–Tropsch synthesis. J Catal 130:597–61010.1016/0021-9517(91)90139-U ↗
25. Zhang MH, Shi LY, Yuan S, Zhao Y, Fang JH (2009) Synthesis and photocatalytic properties of highly stable and neutral TiO2/SiO2 hydrosol. J Colloid Interface Sci 330:113–11810.1016/j.jcis.2008.10.038 ↗
26. Li ZJ, Hou B, Xu Y, Wu D, Sun YH (2005) Hydrothermal synthesis, characterization, and photocatalytic performance of silica–modified titanium dioxide nanoparticles. J Colloid Interface Sci 288:149–15410.1016/j.jcis.2005.02.082 ↗
27. Zhang HM, Quan X, Chen S, Zhao HM (2006) Fabrication and characterization of silica/titania nanotubes composite membrane with photocatalytic capability. Environ Sci Technol 40:6104–610910.1021/es060092d ↗
28. Liu XM, Lu GQ, Yan ZF (2004) Synthesis and stabilization of nanocrystalline zirconia with MSU mesostructure. J Phys Chem B 108:15523–1552810.1021/jp048190d ↗
29. Kriesel JW, Sander MS, Tilley TD (2001) Block copolymer-assisted synthesis of mesoporous, multicomponent oxides by nonhydrolytic, thermolytic decomposition of molecular precursors in nonpolar media. Chem Mater 13:3554–356310.1021/cm010068t ↗
30. Yu G, Zhu LY, Wang XQ, Liu JR, Xu D (2010) Fabrication of silica-supported ZrO2 mesoporous fibers with high thermal stability by sol–gel method through a controlled hydrolysis–condensation process. Microporous Mesoporous Mater 130:189–19610.1016/j.micromeso.2009.11.004 ↗
31. Oveisi H, Suzuki N, Beitollahi A, Yamauchi Y (2010) Aerosol-assisted fabrication of mesoporous titania spheres with crystallized anatase structures and investigation of their photocatalytic properties. J Sol-Gel Sci Technol 56:212–21810.1007/s10971-010-2296-4 ↗
32. Oveisi H, Rahighi S, Jiang XF, Nemoto Y, Beitollahi A, Wakatsuki S, Yamauchi Y (2010) Unusual antibacterial property of mesoporous titania films: drastic improvement by controlling surface area and crystallinity. Chem-An Asian J 5:1978–198310.1002/asia.201000351 ↗
33. Oveisi H, Rahighi S, Jiang XF, Agawa Y, Beitollahi A, Wakatsuki S, Yamauchi Y (2011) Improved inactivation effect of bacteria: fabrication of mesoporous anatase films with fine Ag nanoparticles prepared by coaxial vacuum Arc deposition. Chem Lett 40:420–42210.1246/cl.2011.420 ↗
34. Kimura T, Yamauchi Y, Miyamoto N (2011) Highly photoactive porous anatase films obtained by deformation of 3D mesostructures. Chem-An Eur J 17:4005–401110.1002/chem.201002939 ↗
35. Scaife DE (1980) Oxide semiconductors in photoelectrochemical conversion of solar energy. Sol Energy 25:41–5410.1016/0038-092X(80)90405-3 ↗
36. Wang P, Huang BB, Zhang XY, Qin XY, Dai Y, Jin H, Wei JY, Whangbo MH (2008) Composite semiconductor H2WO4·H2O/AgCl as an efficient and stable photocatalyst under visible light. Chem-An Eur J 14:10543–1054610.1002/chem.200801733 ↗
37. Butler MA (1977) Photoelectrolysis and physical properties of the semiconducting electrode WO2. J Appl Phys 48:1914–192010.1063/1.323948 ↗
38. Zeng J, Wang H, Zhang YC, Zhu MK, Yan H (2007) Hydrothermal synthesis and photocatalytic properties of pyrochlore La2Sn2O7 nanocubes. J Phys Chem C 111:11879–1188710.1021/jp0684628 ↗
39. Raj GR, Hiroaki O, Ryohei T (2008) Shogo, A novel use of TiO2 fiber for photocatalytic ozonation of 2,4-dichlorophenoxyacetic acid in aqueous solution. J Environ Sci 20:1138–114510.1016/S1001-0742(08)62161-0 ↗
40. Braconnier B, Páez CA, Lambert S, Alié C, Henrist C, Poelman D, Pirard JP, Cloots R, Heinrichs B (2009) Ag- and SiO2-doped porous TiO2 with enhanced thermal stability. Microporous Mesoporous Mater 122:247–25410.1016/j.micromeso.2009.03.007 ↗
41. Yuan RS, Fu XZ, Liu P, Wang XX (2006) Influence of solvents on morphology of TiO2 fibers prepared by template synthesis. Scr Mater 55:1003–100610.1016/j.scriptamat.2006.08.015 ↗