journal article·2017-05

Effect of polymerization/complexation agents molar ratio on structure and catalytic activity of La0.7Ba0.3Co0.3Ni0.7O3 nanocatalyst in low-temperature CO oxidation

Mohsen Mohsennia, Bahareh Niknahad, Ali Eliassi

Publisher page

Abstract

Nano-sized perovskite-type oxides of La0.7Ba0.3CoxNi1-xO3 (LBCN) catalysts with x = 0.3, 0.5 and 0.7 were synthesized by polymerized complex method based on the Pechini-type reaction route wherein ethylene glycol and citric acid were used as polymerization/complexation agents. The effects of different ethylene glycol/citric acid molar ratio in the sol–gel process on the structure and catalytic activity of the synthesized La0.7Ba0.3Co0.3Ni0.7O3, which displayed superior catalytic performance toward CO oxidation, were examined. The structure, component band identification, morphology, reducibility, and specific surface area of the prepared LBCNs were investigated with X-ray diffraction, FT-IR, SEM, H2-TPR, and BET, respectively. According to H2-TPR results, the shift of reduction peaks of the LBCN nanocatalysts to the lower temperatures indicated that the reduction of Co3+ to Co2+ can be carried out at the lower temperatures, resulting in the improvement of the redox capacity of LBCNs. The results confirmed superiority of the prepared LBCNs over LaCoO3 especially for EG/CA = 5 for the CO oxidation, resulting in achievement of 90% CO oxidation at 180 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Catalysis and Oxidation Reactions · Advancements in Solid Oxide Fuel Cells

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Wang F, Zhao K, Zhang H, Dong Y, Wang T, He D (2014) Low temperature CO catalytic oxidation over supported Pd–Cu catalysts calcined at different temperatures. Chem Eng J 242:10–1810.1016/j.cej.2013.12.065 ↗
2. Chen S, Si R, Taylor E, Janzen J, Chen J (2012) Synthesis of Pd/Fe3O4 hybrid nanocatalysts with controllable interface and enhanced catalytic activities for CO oxidation. J Phys Chem C 116:12969–1297610.1021/jp3036204 ↗
3. Su Y, Tang Z, Han W, Zhang P, Song Y, Lub G (2014) Influence of the pore structure of CeO2 supports on the surface texture and catalytic activity for CO oxidation. Cryst Eng Comm 16:5189–519710.1039/c4ce00182f ↗
4. Cai L, Hu Z, Branton P, Li W (2014) The effect of doping transition metal oxides on copper manganese oxides for the catalytic oxidation of CO. Chin J Catal 35:159–16710.1016/S1872-2067(12)60699-8 ↗
5. Yu Y, Takei T, Ohashi H, He H, Zhang X, Haruta M (2009) Pretreatments of Co3O4 at moderate temperature for CO oxidation at −80 °C. J Catal 267:121–12810.1016/j.jcat.2009.08.003 ↗
6. Zhang RR, Ren LH, Lu AH, Li WC (2011) Influence of pretreatment atmospheres on the activity of Au/CeO2 catalyst for low-temperature CO oxidation. Catal Commun 13:18–2110.1016/j.catcom.2011.06.013 ↗
7. Zhang H, Liu H (2013) Insights into support effects on Ce-Zr-O mixed oxide-supported gold catalysts in CO oxidation. J Energ Chem 22:98–10610.1016/S2095-4956(13)60013-3 ↗
8. Frey K, Iablokov V, Sáfrán G, Osán J, Sajó I, Szukiewicz R, Chenakin S, Kruse N (2012) Nanostructured MnO x as highly active catalyst for CO oxidation. J Catal 287:30–3610.1016/j.jcat.2011.11.014 ↗
9. Chang LH, Sasirekha N, Rajesh B, Chen YW (2007) CO oxidation on ceria- and manganese oxide-supported gold catalysts. Sep Purif Technol 58:211–21810.1016/j.seppur.2007.07.031 ↗
10. Ma AJ, Wang SZ, Liu C, Xian H, Ding Q, Guo L, Meng M, Tand YS, Tsubakie N, Zhang J, Zheng LR, Lia XG (2014) Effects of Fe dopants and residual carbonates on the catalytic activities of the perovskite-type La0.7Sr0.3Co1−xFexO3 NOx storage catalyst. Appl Catal B 146:24–3410.1016/j.apcatb.2013.06.005 ↗
11. Pecchi G, Dinamarca R, Campos CM, Garcia X, Jimenez R, Fierro JLG (2014) Soot oxidation on silver-substituted LaMn0.9Co0.1O3 perovskites. Ind Eng Chem Res 53:10090–1009610.1021/ie501277x ↗
12. Pecchi G, Jiliberto MG, Delgado EJ, Cadus LE, Fierroc JLG (2011) Effect of B-site cation on the catalytic activity of La1−xCaxBO3 (B = Fe, Ni) perovskite-type oxides for toluene combustion. J Chem Technol Biotechnol 86:1067–107310.1002/jctb.2611 ↗
13. De Lima SM, Da Silva AM, Da Costa Loo, Assaf JM, Mattos LV, Sarkari R, Venugopal A, Noronha FB (2012) Hydrogen production through oxidative steamreforming of ethanol over Ni-based catalysts derived from La1−x Ce x NiO3 perovskite-type oxides. Appl Catal B 121-122:1–910.1016/j.apcatb.2012.03.017 ↗
14. Peng X, Lin H, Shangguan W, Huang Z (2007) Surface properties and catalytic performance of La0.8K0.2CuxMn1–xO3 for simultaneous removal of NOx and soot. Chem Eng Technol 30:99–10410.1002/ceat.200600224 ↗
15. Royer S, Be´rube´ F, Kaliaguine S (2005) Effect of the synthesis conditions on the redox and catalytic properties in oxidation reactions of LaCo1−x Fe x O3. Appl Catal A 282:273–28410.1016/j.apcata.2004.12.018 ↗
16. Alifanti M, Auer R, Kirchnerova J, Thyrion F, Grange P, Delmon B (2003) Activity in methane combustion and sensitivity to sulfur poisoning of La1−x Ce x Mn1−y Co y O3 perovskite oxides. Appl Catal B 41:71–8110.1016/S0926-3373(02)00194-7 ↗
17. Seyfi B, Baghalha M, Kazemian H (2009) Modified LaCoO3 nano-perovskite catalysts for the environmental application of automotive CO oxidation. Chem Eng J 148:306–31110.1016/j.cej.2008.08.041 ↗
18. Teraoka Y, Nii H, Kagawaa S, Janssonb K, Nygren M (2000) Influence of the simultaneous substitution of Cu and Ru in the perovskite-type (La,Sr)MO3 (M=Al, Mn, Fe, Co) on the catalytic activity for CO oxidation and CO–NO reactions. Appl Catal A 194–195:35–4110.1016/S0926-860X(99)00351-8 ↗
19. Petrovic S, Rakic V, Jovanovic DM, Baricevic AT (2006) Oxidation of CO over Ru containing perovskite type oxides. Appl Catal B 66:249–25710.1016/j.apcatb.2006.04.003 ↗
20. Yan X, Huang Q, Li B, Xu X, Chen Y, Zhu S, Shen S (2013) Catalytic performance of LaCo0.5M0.5O3 (M = Mn, Cr, Fe, Ni, Cu) perovskite-type oxides and LaCo0.5Mn0.5O3 supported on cordierite for CO oxidation. Ind Eng Chem 19:561–56510.1016/j.jiec.2012.09.026 ↗
21. Huang K, Chu X, Yuan L, Feng W, Wu X, Wang X, Feng S (2014) Engineering the surface of perovskite La0.5Sr0.5MnO3 for catalytic activity of CO oxidation. Chem Commun 50:9200–920310.1039/C4CC00023D ↗
22. Yu SH, Tao F, Liu J (2012) Editorial: Catalyst synthesis by design for the understanding of catalysis. Chem Cat Chem 4:1445–1447
23. Huízar-Félix AM, Hernández T, De la Parra S, Ibarra J, Kharisov B (2012) Sol–gel based Pechini method synthesis and characterization of Sm1−xCaxFeO3 perovskite 0.1 ≤ x ≤ 0.5. Powder Technol 229:290–29310.1016/j.powtec.2012.06.057 ↗
24. Ran R, Wu X, Weng D (2006) Effect of complexing species in a sol–gel synthesis on the physicochemical properties of La0.7Sr0.3Mn0.7Cu0.3O3+λ catalyst. J Alloys Compd 414:169–17410.1016/j.jallcom.2005.03.120 ↗
25. Krupicka E, Reller A, Weidenkaff A (2002) Morphology of nanoscaled LaMO3-particles (M=Mn, Fe, Co, Ni) derived by citrate precursors in aqueous and alcoholic solvents. Cryst Eng 5:195–20210.1016/S1463-0184(02)00029-1 ↗
26. Spinicci R, Faticanti M, Marini P, De Rossi S, Porta P (2003) Catalytic activity of LaMnO3 and LaCoO3 perovskites towards VOCs combustion. J Mol Catal A 197:147–15510.1016/S1381-1169(02)00621-0 ↗
27. Cushing BL, Kolesnichenko VL, O’Connor CJ (2004) Recent advances in the liquid-phase syntheses of inorganic nanoparticles. Chem Rev 104:3893–394610.1021/cr030027b ↗
28. Rezaei M, Alavi SM, Sahebdelfar S, Yan ZF (2009) Synthesis of ceria doped nanozirconia powder by a polymerized complex method. J Porous Mater 16:497–50510.1007/s10934-008-9224-9 ↗
29. Kumar S, Teraokab Y, Joshi AG, Rayalua S, Labhsetwara N (2011) Ag promoted La0.8Ba0.2MnO3 type perovskite catalyst for N2O decomposition in the presence of O2, NO and H2O. J Mol Catal A: Chem 348:42–5410.1016/j.molcata.2011.07.017 ↗
30. Liang H, Hong Y, Zhu C, Li S, Chen Y, Liu Z, Ye D (2013) Influence of partial Mn-substitution on surface oxygen species of LaCoO3 catalysts. Catal Today 201:98–10210.1016/j.cattod.2012.04.036 ↗
31. Fattah Z, Rezaei M, Biabani-Ravandi A, Irankhah A (2014) Preparation of Co–MgO mixed oxide nanocatalysts for low temperature CO oxidation: Optimization of preparation conditions. Process Saf Environ Prot 92:948–95610.1016/j.psep.2013.12.003 ↗
32. Ghouse M, Al-Yousef Y, Al-Musa A, Al-Otaibi MF (2010) Preparation of La0.6Sr0.4Co0.2Fe0.8O3 nanoceramic cathode powders for solid oxide fuel cell (SOFC) application. Int J Hydrogen Energy 35:9411–941910.1016/j.ijhydene.2010.04.144 ↗
33. Pai RV, Vittal Rao TV, Kumar A, Mukerjee SK, Venugopal V (2007) Synthesis and characterization of lead lanthanum zirconate titanate (Pb0.95La0.05Zr0.65Ti0.35)O3. J Alloys Compd 443:166–17010.1016/j.jallcom.2006.11.173 ↗
34. Qiu S, Fan H, Zheng X (2007) Pb(Zr0.95Ti0.05)O3 powders synthesized by pechini method: Effect of molecular weight of polyester on the phase and morphology. J Sol–Gel Sci Technol 42:21–2610.1007/s10971-006-1509-3 ↗
35. Rudisill SG, Hein NM, Terzic D, Stein A (2013) Controlling microstructural evolution in pechini gels through the interplay between precursor complexation, step-growth polymerization, and template confinement. Chem Mater 25:745–75310.1021/cm303761z ↗
36. Sun S, Yang L, Pang G, Feng S (2011) Surface properties of Mg doped LaCoO3 particles with large surface areas and their enhanced catalytic activity for CO oxidation. Appl Catal A 401:199–20310.1016/j.apcata.2011.05.015 ↗
37. Fang S, Wang L, Sun Z, Feng N, Shen C, Lin P, Wan H, Guan G (2014) Catalytic removal of diesel soot particulates over K and Mg substituted La1 –x KxCo1 −yMgyO3 perovskite oxides. Catal Commun 49:15–1910.1016/j.catcom.2014.01.029 ↗
38. Wu S, Song C, Bin F, Lv G, Song J, Gong C (2014) La1-xCexMn1-yCoyO3 perovskite oxides: Preparation, physicochemical properties and catalytic activity for the reduction of diesel soot. Mater Chem Phys 148:181–18910.1016/j.matchemphys.2014.07.029 ↗
39. Guo ZP, Zhong S, Wang GX, Walter G, Liu HK, Dou SX (2002) Synthesis of layered-structure LiMn1 − x Cr x O 2 by the pechini method and characterization as a cathode for rechargeable Li / LiMnO2 cells batteries and energy conversion. J Electrochem Soc 149:A792–A79710.1149/1.1477206 ↗
40. Zhu J, Li H, Zhong L, Xiao P, Xu X, Yang X, Zhao Z, Li J (2014) Perovskite oxides: preparation, characterizations, and applications in heterogeneous catalysis. ACS Catal 4:2917–294010.1021/cs500606g ↗
41. Royer S, Duprez D (2011) Catalytic oxidation of carbon monoxide over transition metal oxides. Chem Cat Chem 3:24–65
42. Steenwinkel YZ, Van der Zande LM, Castricum HL, Bliek A (2004) Step response and transient isotopic labelling studies into the mechanism of CO oxidation over La0.8Ce0.2MnO3 perovskite. Appl Catal B 54:93–10310.1016/j.apcatb.2004.02.008 ↗
43. Yang W, Zhang R, Chen B, Bion N, Duprez D, Royer S (2012) Activity of perovskite-type mixed oxides for the low-temperature CO oxidation: Evidence of oxygen species participation from the solid. J Catal 295:45–5810.1016/j.jcat.2012.07.022 ↗
44. Liu J, Zhao Z, Xu C, Duan A (2008) Simultaneous removal of NO x and diesel soot over nanometer Ln-Na-Cu-O perovskite-like complex oxide catalysts. Appl Catal B 78:61–7210.1016/j.apcatb.2007.09.001 ↗
45. Baylet A, Royer S, Marecot P, Tatibouet JM, Duprez D (2008) Effect of Pd precursor salt on the activity and stability of Pd-doped hexaaluminate catalysts for the CH4 catalytic combustion. Appl Catal B 81:88–9610.1016/j.apcatb.2007.12.004 ↗
46. Zhou C, Liu X, Wu C, Wen Y, Xue Y, Chen R, Zhang Z, Shan B, Yin H, Wang WG (2014) NO oxidation catalysis on copper doped hexagonal phase LaCoO3: A combined experimental and theoretical study. Phys Chem Chem Phys 16:5106–511210.1039/c3cp54963a ↗
47. Zhang Y, Beckers J, Bliek A (2002) Surface properties and catalytic performance in CO oxidation of cerium substituted lanthanum–manganese oxides. Appl Catal A 235:79–9210.1016/S0926-860X(02)00241-7 ↗