journal article·2022-01

Texturing melting gels for water harvesting

S. Jenkins, E. Sciarrone, L. C. Klein

Publisher page

Abstract

Organically modified silica gels that show melting gel behavior were coated on sand-blasted steel substrates. The gel surfaces were patterned using silicone rubber molds and nickel mesh. Grooved and hexagonally imprinted surfaces were compared to an unpatterned substrate for their ability to condense water from water vapor in humid air. The patterns of vertical lines were best able to condense the vapor in a way that lead to more liquid water collection per area. The motivation for studying patterned surfaces is to find ways to extend water harvesting capabilities in regions of low humidity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials · Solar-Powered Water Purification Methods

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Cain NL (2014) A different path: the global water crisis and rainwater harvesting. Consilience: J Sustain Dev 12:147–157
2. Wessel L (2019) How humans get in the way of clean water. Scientific American 282 (Jan)
3. Zheng S, Eimann F, Philipp C, Fieback T, Gross U (2020) Experimental and modeling investigations of dropwise condensation out of convective humid air flow. Int J Heat Mass Transf 151:119349 16p
4. Sikarwar BS, Battoo NK, Khandekar S, Muralidhar K (2011) Dropwise condensation underneath chemically textured surfaces: simulation and experiments. J Heat Transf 133:021501 15p10.1115/1.4002396 ↗
5. Wilkins DG, Bromley LA, Read SM (1972) Dropwise and filmwise condensation. AIChE J 19:119–12310.1002/aic.690190117 ↗
6. El Fil B, Kini G, Garimella S (2020) A review of dropwise condensation: theory, modeling, experiments and applications. Int J Heat Mass Transf 160:120172 21p10.1016/j.ijheatmasstransfer.2020.120172 ↗
7. Xie J, Xu J, Shang W, Zhang KI (2018) Dropwise condensation on superhydrophobic nanostructure surface part II: Mathematical model. Int J Heat Mass Transf 127:1170–118710.1016/j.ijheatmasstransfer.2018.07.008 ↗
8. Shirsath GB, Muralidhar J, Pala RGS, Ramkumar J (2019) Condensation of water vapor underneath an inclined hydrophobic textured surface machined by laser and electric discharge. Appl Surf Sci 484:999–100910.1016/j.apsusc.2019.04.076 ↗
9. Avnir D, Klein LC, Levy D, Schubert U, Wojcik AB (1998) Organo-silica Sol-Gel Materials. In: Rappoport Z, Apeloig Y (eds.) The Chemistry of Organosilicon Compounds Vol. 2. Wiley, London, p 2317–2362
10. Klein LC, Jitianu A (2011) Organic-inorganic hybrid melting gels. J Sol-Gel Sci Tech 59:424–43110.1007/s10971-011-2414-y ↗
11. Jitianu A, Doyle J, Amatucci G, Klein LC (2010) Methyl modified siloxane melting gels for hydrophobic films. J Sol-Gel Sci Tech 53:272–27910.1007/s10971-009-2087-y ↗
12. Jitianu A, Amatucci G, Klein LC (2009) Phenyl-substituted siloxane hybrid gels that soften below 140 °C. J Am Ceram Soc 92:36–4010.1111/j.1551-2916.2008.02841.x ↗
13. Jitianu J, Lammers K, Arbuckle-Keil GA, Klein LC (2012) Thermal analysis of organically modified siloxane melting gels. J Therm Anal Calorim 107:1039–104510.1007/s10973-011-2024-5 ↗
14. Ashraf KM, Matsumoto S, Kurumada K (2012) Determination of heat treatment temperature for completing polycondensation of vinyl substituted silica particles prepared by sol-gel method. Chem Eng Technol 35:2155–216010.1002/ceat.201200368 ↗
15. Jitianu A, Cadars S, Zhang F, Rodriguez G, Picard Q, Aparicio M, Mosa J, Klein LC (2017) 29Si NMR and SAXS investigation of the hybrid organic-inorganic glasses obtained by consolidation of the melting gels. Dalton Trans 46:3729–374110.1039/C6DT04394A ↗
16. Klein LC, Al-Marzoki K, Jitianu A (2017) Phase separation in melting gels. Phys Chem Glasses: Eur J Glass Sci Technol B 58:142–149
17. Abolghasemibizaki M, Robertson CJ, Fergusson CP, McMasters RL, Mohammadi R (2018) Rolling viscous drops on a non-wettable surface containing both micro- and macro-scale roughness. Phys Fluids 30:023105 7 p10.1063/1.5016824 ↗
18. Zhao F, Zhou X, Shi Y, Qian X, Alexander M, Zhao X, Mendez S, Yang E, Qu L, Yu G (2018) Highly efficient solar vapour generation via hierarchically nanostructured gels. Nat Nanotechnol 13:489–49510.1038/s41565-018-0097-z ↗
19. Wang Z, Owais A, Neto C, Pereira JM, Gan Y (2020) Enhancing spontaneous droplet motion on structured surfaces with tailored wedge design. Adv Mater Interfaces 2000520 8p10.1002/admi.202000520 ↗
20. Lee J, So J, Bae WG, Won Y (2020) The design of hydrophilic nanochannel-macrostripe fog collector: enabling wicking-assisted vertical liquid delivery for the enhancement in fog collection efficiency. Adv Mater Interfaces 7:1902150 9p
21. Zhao Y, Preston DJ, Lu Z, Queeney J, Wang EN (2018) Effects of millimetric geometric features on dropwise condensation under different vapor conditions. Int J Heat Mass Transf 119:931–93810.1016/j.ijheatmasstransfer.2017.11.139 ↗
22. Jeong S, Ahn SJ, Moon J (2005) Fabrication of patterned inorganic-organic hybrid film for the optical waveguide by microfluidic lithography. J Am Ceram Soc 88:1003–103610.1111/j.1551-2916.2005.00200.x ↗
23. Matsuda A, Matsuno Y, Tatsumisago M, Minami T (1998) Fine patterning and characterization of gel films derived from methyltriethoxysilane and tetraethoxysilane. J Am Ceram Soc 81:2849–285210.1111/j.1151-2916.1998.tb02705.x ↗
24. Masai H, Takahashi M, Tokuda Y, Yoko T (2005) Gel-melting method for preparation of organically modified siloxane low-melting glasses. J Mater Res 20:1234–124110.1557/JMR.2005.0151 ↗
25. Gambino L, Jitianu A, Klein LC (2011) Dielectric properties of organically modified siloxane melting gels. J Non-crystalline Solids 358:3501–350410.1016/j.jnoncrysol.2012.01.002 ↗
26. Mele E, Di Benedetto F, Persano L, Pisignano D, Cingolani R (2005) Combined capillary force and step and flash lithography. Nanotechnology 16:391–39510.1088/0957-4484/16/4/010 ↗
27. Ang BTW, Zhang J, Lin GJ, Wang H, Lee WSV, Xue J (2019) Enhancing water harvesting through cascading effect. ACS Appl Mater Interfaces 11:27464–2746910.1021/acsami.9b08460 ↗
28. Xu S, Wang Q, Wang N (2021) Chemical fabrication strategies for achieving bioinspired superhydrophobic surfaces with micro and nanostructures. Adv Eng Mater 23:2001083 (21 p)
29. Wang J, Yi S, Yang Z, Chen Y, Jiang L, Wong CP (2020) Laser dorect structuring of bioinspired spine with backward microbarbs and hierarchical microchannels for ultrafast water transport and efficient fog harvesting. ACS Appl Mater Interfaces 12:21080–2108710.1021/acsami.0c02888 ↗
30. Mondal S, Phukan M, Ghatak A (2015) Estimation of solid-liquid interfacial tension using curved surface of a soft solid. PNAS 112:12563–1256810.1073/pnas.1502642112 ↗
31. Klein LC, McClarren B, Jitianu A, Silica-Containing Hybrid Nanocomposite “Melting Gels” In: Thermec 2013 Symposium on Advanced Protective Coatings/Surface Engineering, ed. B. Mishra, M. Ionescu. And T. Chandra, Materials Science Forum, Trans Tech Publishers, Vol. 783–786, 2014, pp. 1432-143710.4028/www.scientific.net/MSF.783-786.1432 ↗
32. Back F, Bockmeyer M, Rudigier-Voigt E, Lobmann P (2013) Hybrid polymer sol-gel material for UV-nanoimprint: microstructure and thermal densification. J Sol-Gel Sci Technol 66:73–8310.1007/s10971-013-2969-x ↗
33. Kim E, Xia Y, Whitesides GM (1996) Micromolding in capillaries: applications in materials science. J Am Chem Soc 118:5722–573110.1021/ja960151v ↗
34. Letailleur A, Teisseire J, Chemin N, Barthel E, Søndergard E (2010) Chemorheology of sol-gel silica for the patterning of high aspect ratio structures by nanoimprint. Chem Mater 22:3143–315110.1021/cm100285b ↗
35. Fernandez-Sanchez C, Cadarso VJ, Darder M, Dominguez C, Llobera A (2008) Patterning high-aspect-ratio sol-gel structures by microtransfer molding. Chem Mater 20:2662–266810.1021/cm702905x ↗
36. Ikeda H, Fujino S, Kajiwara T (2011) Fabrication of micropatterns on silica glass by a room-temperature imprinting method. J Am Ceram Soc 94:2319–232210.1111/j.1551-2916.2010.04368.x ↗
37. Schmidt M, Philippi M, Munzer M, Stangl JM, Wieczorek R, Harneit W, Muller-Buschbaum K, Enke D, Steinhart M (2018) Capillary nanostamping with spongy mesoporous silica stamps. Adv Funct Mater 28:1800700 9p10.1002/adfm.201800700 ↗
38. Al-Marzoki K, Klein LC, Jitianu A (2020) Effect of tetraethoxyethoxysilane on melting gel behavior. J Am Ceram Soc 103:4140–414910.1111/jace.17106 ↗
39. Coblas DG, Fatu A, Maoui A, Hajam M (2015) Manufacturing textured surfaces: State of art and recent developments. J Eng Tribology 229:3–29