Capillary optical fibers based on SiO2 –TiO2–P2O5 and TiO2–P2O5 internal coatings prepared by sol-gel method
Source abstract
Abstract
This paper presents a novel approach to the preparation of capillary optical fibers using sol-gel method. It employs a novel modification of sol-gel techniques for the application of layers onto the inner walls of silica tubes. This modification was employed for the preparation of multilayer internal coatings of silica tubes which consist of alternating low-index layers of silica and high-index layers containing titania. Novel materials, namely silica-titania-phosphorus pentoxide and titania-phosphorus pentoxide prepared by the sol-gel method, were used in the high-index layers. Morphology and optical properties of single layers of all the materials applied on glass slides are presented as well as the optical properties of multilayer coatings inside silica tubes. The internally coated tubes were drawn into fibers with air and solid cores. Characteristics of the prepared fibers are also shown in the paper. Fibers with optical losses below 0.02 dB/cm have been prepared.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Photonic and Optical Devices · Semiconductor Lasers and Optical Devices · Advanced Fiber Optic Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Yeh C (2012) Applied photonics, Academic Press, Cambridge
2. Almeida RM, Martucci A, Santos L, Hernandes RER (2020) Sol-Gel derived optical and photonic materials, Woodhead Publishing, Cambridge
3. Guglielmi M, Martucci A (2018) Sol-gel nanocomposites for optical applications. J Sol Gel Sci Technol 88:551–56310.1007/s10971-018-4846-0 ↗
4. Alberti S, Jagerska J (2021) Sol-Gel thin film processing for integrated waveguide sensors. Front Mater 8:article 62982210.3389/fmats.2021.629822 ↗
5. Reisfeld R (2001) Prospects of sol-gel technology towards luminescent materials. Optical Mater 16:1–710.1016/S0925-3467(00)00052-5 ↗
6. Vanconscelos HC (2020) Optical waveguides based on sol-gel coatings, Chapter 3. In: Electromagnetic propagation and waveguides in photonics and microwave engineering, InTechOpen, London
7. Wang J, Chen Z, Wang Y, Wang T, Liu S, Chen G, Wang Y, Ren W, Li L (2020) Molybdenum disulfide film saturable absorber based on sol-gel glass and spin-coating used in high-power Q‑ switched Nd: YAG laser. ACS Appl Mater Interfaces 12(8):9404–940810.1021/acsami.9b14494 ↗
8. Gaponenkoa NV, Kholov a PA, Raichenok TF, S.Ya.Prislopski (2019) Enhanced luminescence of europium in sol-gel derived BaTiO 3/SiO 2 multilayer cavity structure. Optical Mater 96:10926510.1016/j.optmat.2019.109265 ↗
9. Li S, Zhao W, Sun Y, Dai N, Hu G (2020) High-efficiency, low-cost distributed Bragg reflector based on Al2O3/PbZr0.4Ti0.6O3 multilayer. AIP Advan 10:05522410.1063/5.0004896 ↗
10. Chen Y, Lin Z, Wang Y, Wang M, Zhang L, Jiao Y, Dong H, Wang S, Yu C, Hu L (2022) Nd 3+-doped silica glass and fiber prepared by modified sol-gel method. Chin Optics Lett 20(9):09160110.3788/COL202220.091601 ↗
11. Ferreira J, Santos LF, Almeida RM (2017) Sol–gel-derived Yb: YAG polycrystalline ceramics for laser applications. J Sol Gel Sci Technol 83:436–44610.1007/s10971-017-4420-1 ↗
12. Wang J, Zheng B, Wang P (2020) 3D printed Er3+/Yb3+ co-doped phosphosilicate glass based on sol-gel technology. J Non Cryst Solids 550:12036210.1016/j.jnoncrysol.2020.120362 ↗
13. MacChesney JB, Johnson Jr. DW, Bhandarkar S, Bohrer MP, Fleming JW, Monberg EM, Trevor DJ (1998) Optical fibers by a hybrid process using sol-gel silica overcladding tubes. J Non Cryst Solids 226:232–23810.1016/S0022-3093(98)00407-4 ↗
14. Bise RT, Trevor DJ (2005) Sol-gel derived microstructured fiber: fabrication and characterization. In: Proceedings optical fiber communication conference & exposition and the national fiber optic engineers conference, Anaheim, CA, pp. 610.1109/OFC.2005.192772 ↗
15. Zhu Y, Bise RT, Kanka J, Peterka P, Du H (2008) Fabrication and characterization of solid-core photonic crystal fiber with steering-wheel air-cladding for strong evanescent field overlap. Optics Commun 281:55–6010.1016/j.optcom.2007.08.071 ↗
16. Baz A, lHamzaoui H, Fsaifes I, Bouwmans G, Bouazaouiand M, Bigot L (2013) A pure silica ytterbium-doped sol–gel-based fiber laser. Laser Phys Lett 10:055106. 5pp10.1088/1612-2011/10/5/055106 ↗
17. DiGiovanni DJ, MacChesney JB (1991) New optical fiber fabrication technique using sol-gel dip coating. Proc. Optical Fiber Commun OSA Technical Digest Ser 4:62. paper WA2, p.
18. Wu F, Puc G, Foy P, Snitzer E, Sigel Jr. GH (1993) Low-loss rare earth doped single-mode fiber by sol-gel method. Mater Res Bull 28:637–644.10.1016/0025-5408(93)90107-O ↗
19. Matejec V, Kasik I, Berkova D, Hayer M, Kanka J (1998) Sol-Gel fabrication and properties of silica cores of optical fibers doped with Yb3+, Er3+, Al2 O3 or TiO2. J Sol Gel Sci Technol 13:617–62110.1023/A:1008655630006 ↗
20. Li Y, Huang J, Li Y, Li H, He Y, Gu S, Chen G, Liu L, Xu L (2008) Optical properties and laser output of heavily Yb-doped fiber prepared by sol-gel method and DC-RTA technique. J Lightwave Technol 26(18):3256–326010.1109/JLT.2008.925038 ↗
21. Varak P, Mrazek J, Blanc W, Aubrecht J, Kamradek M, Podrazky O (2020) Preparation and properties of Tm-doped SiO2-ZrO2 phase separated optical fibers for use in fiber lasers. Optics Mater Express 10:1383–139110.1364/OME.394068 ↗
22. Wang X, Wolfbeis OS (2020) Fiber-optic chemical sensors and biosensors (2015−2019). Anal Chem 92(1):397–4310.1021/acs.analchem.9b04708 ↗
23. Kasik I, Mrazek J, Podrazky O, Seidl M, Aubrecht J, Tobiska P, Pospisilova M, Matejec V, Kovacs B, Markovics A, Szili M (2009) Fiber-optic detection of chlorine in water. Sensors Actuators B Chem 139(1):139–14210.1016/j.snb.2008.10.064 ↗
24. Matejec V, Mrazek J, Hayer M, Kasik I, Peterka P, Kanka J, Honzatko P, Berkova D (2006) Microstructure fibers for gas detection. Mater Sci Eng C 26(2–3):317–32110.1016/j.msec.2005.10.043 ↗
25. Bledt CM, Melzer JE, Harrington JA (2013) Design and fabrication of multilayer thin film coated hollow waveguides for enhanced infrared radiation delivery, Optical Fibers and Sensors for Medical Diagnostics and Treatment Applications XIII, edited by Israel Gannot. Proc SPIE 8576:857600
26. Barton I, Matejec V, Mrazek J, Podrazky O, Matousek J (2017) Preparation of Bragg mirrors on silica optical fibers and inner walls of silica capillaries by employing the sol–gel method, and titanium and silicon alkoxides. J Sol Gel Sci Technol 81:867–87910.1007/s10971-016-4222-x ↗
27. Barton I, Matejec V, Matousek J (2016) Photocatalytic activity of nanostructured TiO2 coating on glass slides and optical fibers for methylene blue or methyl orange decomposition under different light excitation. J Photochem Photobiol A Chem 317:72–8010.1016/j.jphotochem.2015.11.009 ↗
28. Yablon AD (2011) New transverse techniques for characterizing high-power optical fibers. Optical Eng 50,11:id 11160310.1117/1.3609812 ↗
29. Matejec V, Kasik I, Berkova D, Hayer M, Chomat M, Berka Z, Langrova A (2001) Properties of optical fiber preforms prepared by inner coating of substrate tubes. Ceram Silik 45:62–69