Novel robust upcycling approach for the manufacture of value-added polymers based on mixed (poly)urethane scraps
Source abstract
Abstract
Abstract Plastic pollution undoubtedly is a big global issue for present and future generations. Despite numerous activities in the field, the recycling of thermoset polymers still poses an immense challenge to the chemical industry. The present work proposes a new solution to the plastics pollution issue by developing a novel technology for the transformation of polyurethane (PUR) scraps into value-added polymers. In contrast to conventional methods, which usually involve elaborate but costly methods for sorting and separating different plastics into single-origin material flows, the feasibility of direct upcycling of valueless, mixed PUR-based production scraps into polymer aerogels will be shown. Despite the impurity of the feedstock, the aerogels synthesized in this work possess a well-defined and tuneable meso-porous microstructure and a very low thermal conductivity in the range of comparable high-performance insulation materials. The transfer of this newly developed approach to other polymers as well as bio-based precursors could significantly accelerate the development of holistic circular economies. Graphical Abstract
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microplastics and Plastic Pollution · Additive Manufacturing and 3D Printing Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Ritchie H, Roser M (2018) Plastic Pollution. https://ourworldindata.org/plastic-pollution Accessed 2020-06-05
2. Geyer R, Jambeck JR, Law KL (2017) Production, use, and fate of all plastics ever made. Sci Adv 3:1–510.1126/sciadv.1700782 ↗
3. Eriksen M, Lebreton LCM, Carson HS, Thiel M, Moore CJ, Borerro JC, Galgani F, Ryan PG, Reisser J (2014). Plastic Pollution in the World’s Oceans: More than 5 Trillion Plastic Pieces Weighing over 250,000 Tons Afloat at Sea. PLoS ONE 9 . https://doi.org/10.1371/journal.pone.011191310.1371/journal.pone.0111913 ↗
4. Kühn S, Bravo Rebolledo EL, van Franeker JA (2015) Deleterious Effects of Litter on Marine Life. In: Bergmann M, Gutow L, Klages M (eds.) Marine Anthropogenic Litter. Springer, Cham, p. 75–116. Chap. 4. https://doi.org/10.1007/978-3-319-16510-3_410.1007/978-3-319-16510-3_4 ↗
5. Kim J-S, Lee H-J, Kim S-K, Kim H-J (2018) Global Pattern of Microplastics (MPs) in Commercial Food-Grade Salts: Sea Salt as an Indicator of Seawater MP Pollution. Environ Sci Technol 52:12819–1282810.1021/acs.est.8b04180 ↗
6. Piehl S, Leibner A, Löder MGJ, Dris R, Bogner C, Laforsch C (2018) Identification and quantification of macro- and microplastics on an agricultural farmland. Sci Rep 8:1795010.1038/s41598-018-36172-y ↗
7. Schymanski D, Goldbeck C, Humpf H-U, Fürst P (2018) Analysis of microplastics in water by micro-Raman spectroscopy: Release of plastic particles from different packaging into mineral water. Water Res 129:154–16210.1016/j.watres.2017.11.011 ↗
8. Wu C-H, Chang C-Y, Li J-K (2002) Glycolysis of rigid polyurethane from waste refrigerators. Polym Degrad Stab 75:413–42110.1016/S0141-3910(01)00237-3 ↗
9. Wu C-H, Chang C-Y, Cheng C-M, Huang H-C (2003) Glycolysis of waste flexible polyurethane foam. Polymer Degrad Stab 80:103–11110.1016/S0141-3910(02)00390-7 ↗
10. Aguado A, Martínez L, Moral A, Fermoso J, Irusta R (2011) Chemical Recycling of Polyurethane Foam Waste Via Glycolysis. Chem Eng Transac 24:1069–1074
11. Morcillo-Bolaños YD, Malule-Herrera WJ, Ortiz-Arango JC, Villa-Holguín AL (2018) Polyurethane flexible foam recycling via glycolysis using Zn/Sn/Al hydrotalcites as heterogeneous catalyst. Revista Facultad de Ingeniería Universidad de Antioquia 87:77–8510.17533/udea.redin.n87a10 ↗
12. Simón D, Borreguero AM, de Lucas A, Rodríguez JF (2018) Recycling of polyurethanes from laboratory to industry, a journey towards the sustainability. Waste Manag 76:147–17110.1016/j.wasman.2018.03.041 ↗
13. Molero C, de Lucas A, Rodríguez JF (2006) Recovery of polyols from flexible polyurethane foam by “split-phase” glycolysis with new catalysts. Polym Degrad Stab 91:894–90110.1016/j.polymdegradstab.2005.06.023 ↗
14. Borda J, Pásztor G, Zsuga M (2000) Glycolysis of polyurethane foams and elastomers. Polym Degrad Stab 68:419–42210.1016/S0141-3910(00)00030-6 ↗
15. RAMPF Holding GmbH & Co. KG: Board Materials. https://www.rampf-group.com/en/products-solutions/chemical/board-materials/
16. Braslaw J, Gerlock JL (1984) Polyurethane Waste Recycling. 2. Polyol Recovery and Purification. Ind Eng Chem Process Des Dev 23:552–55710.1021/i200026a024 ↗
17. Gerlock J, Braslaw J, Zlnbo M (1984) Polyurethane Waste Recycling. 1. Glycolysis and Hydroglycolysis of Water-Blown Foams. Ind Eng Chem Process Des Dev 23:545–55210.1021/i200026a023 ↗
18. García-González CA, Camino-Rey MC, Alnaief M, Zetzl C, Smirnova I (2012) Supercritical drying of aerogels using CO2: Effect of extraction time on the end material textural properties. J Supercrit Fluids 66:297–30610.1016/j.supflu.2012.02.026 ↗
19. Şahin İ, Özbakır Y, İnönü Z, Ulker Z, Erkey C (2017) Kinetics of supercritical drying of gels. Gels 4:310.3390/gels4010003 ↗
20. Kistler SS (1931) Coherent Expanded Aerogels and Jellies. Nature 127:74110.1038/127741a0 ↗
21. Kistler SS (1932) Coherent Expanded Aerogels. Rubber Chem Technol 5:600–60310.5254/1.3539386 ↗
22. Pierre AC (2011) History of Aerogels. In: Aegerter MA, Leventis N, Koebel MM (eds) Aerogels Handbook, 1st edn., Springer, New York, NY, p. 3–18. Chap. 1. https://doi.org/10.1007/978-1-4419-7589-8_110.1007/978-1-4419-7589-8_1 ↗
23. Smirnova I, Gurikov P (2018) Aerogel production: Current status, research directions, and future opportunities. J Supercrit Fluids 134:228–23310.1016/j.supflu.2017.12.037 ↗
24. Smirnova I, Gurikov P (2017) Aerogels in chemical engineering: Strategies toward tailor-made aerogels. Annu Rev Chem Biomol Eng 8:307–33410.1146/annurev-chembioeng-060816-101458 ↗
25. Beyerlein G-S (2021) Synthese und Eigenschaften polyurethanbasierter Aerogele auf Basis rohstofflich recycelter Reststoffe. PhD thesis, Rheinisch-Westfälische Technische Hochschule Aachen https://publications.rwth-aachen.de/record/836197
26. Reichenauer G, Scherer GW (2001) Extracting the pore size distribution of compliant materials from nitrogen adsorption. Coll Surf A 187-188:41–5010.1016/S0927-7757(01)00619-7 ↗
27. Scherer GW, Smith DM, Stein D (1995) Deformation of aerogels during characterization. J Non-Cryst Sol 186:309–31510.1016/0022-3093(95)00058-5 ↗
28. Reichenauer G (2011) Structural Characterization of Aerogels. In: Aegerter MA, Leventis N, Koebel MM (eds.) Aerogels Handbook, 1st edn. Springer, New York, NY, p. 449–498. Chap. 21. https://doi.org/10.1007/978-1-4419-7589-8_2110.1007/978-1-4419-7589-8_21 ↗
29. Feigin LA, Svergun DI, Taylor GW (1987) In: Taylor G.W. (ed) Determination of the Integral Parameters of Particles, Springer, Boston, MA, p. 59–105. https://doi.org/10.1007/978-1-4757-6624-0_310.1007/978-1-4757-6624-0_3 ↗
30. Nilsen E, Einarsrud M-A, Scherer GW (1997) Effect of precursor and hydrolysis conditions on drying shrinkage. J Non-Cryst Sol 221:135–14310.1016/S0022-3093(97)00413-4 ↗
31. Scherer GW, Hæreid S, Nilsen E, Einarsrud M-A (1996) Shrinkage of silica gels aged in TEOS. Jo Non-Cryst Sol 202:42–5210.1016/0022-3093(96)00136-6 ↗
32. Rostamitabar M, Subrahmanyam R, Gurikov P, Seide G, Jockenhoevel S, Ghazanfari S (2021) Cellulose aerogel micro fibers for drug delivery applications. Mater Sci Eng 127:11219610.1016/j.msec.2021.112196 ↗
33. Scherer GW (1990) Theory of drying. J Am Ceram Soc 73:3–1410.1111/j.1151-2916.1990.tb05082.x ↗
34. Smith DM, Scherer GW, Anderson JM (1995) Shrinkage during drying of silica gel. J Non-Cryst Sol 188:191–20610.1016/0022-3093(95)00187-5 ↗
35. Scherer GW (2019) Stress and strain during supercritical drying. J Sol-Gel Sci Technol 90:8–1910.1007/s10971-018-4808-6 ↗
36. Bueno A, Selmer I, Raman SP, Gurikov P, Lölsberg W, Weinrich D, Fricke M, Smirnova I (2018) First Evidence of Solvent Spillage under Subcritical Conditions in Aerogel Production. Ind Eng Chem Res 57:8698–870710.1021/acs.iecr.8b00855 ↗
37. Ratke L, Gurikov P (2021) The Chemistry and Physics of Aerogels. Cambridge University Press, Cambridge, UK10.1017/9781108778336 ↗
38. Ganesan K, Barowski A, Ratke L (2019) Gas permeability of cellulose aerogels with a designed dual pore space system. Molecules 24:268810.3390/molecules24152688 ↗
39. Ebert H-P, Braxmeier S, Reichenauer G, Hemberger F, Lied F, Weinrich D, Fricke M (2021) Intercomparison of thermal conductivity measurements on a nanoporous organic aerogel. Int J Thermophys. 42. https://doi.org/10.1007/s10765-020-02775-910.1007/s10765-020-02775-9 ↗
40. Fricke J (1986) Thermal Transport in Porous Superinsulations. In: Fricke J (ed) Aerogels. Springer Proceedings in Physics, Vol 6, pp. 94–103. Springer, ??? . Chap. 11. https://doi.org/10.1007/978-3-642-93313-4_1110.1007/978-3-642-93313-4_11 ↗
41. Bellunato T, Calvi M, Matteuzzi C, Musy M, Perego DL, Storaci B (2008) Refractive index of silica aerogel: Uniformity and dispersion law. Nucl Instrum Method Phys Res Sec A 595:183–18610.1016/j.nima.2008.07.072 ↗
42. Lu X, Wang P, Arduini-Schuster MC, Kuhn J, Büttner D, Nilsson O, Heinemann U, Fricke J (1992) Thermal transport in organic and opacified silica monolithic aerogels. J Non-Cryst Sol 145:207–21010.1016/S0022-3093(05)80457-0 ↗
43. Ebert H-P (2011) Thermal properties of aerogels. In: Aerogels Handbook, Springer, p. 537–564. https://doi.org/10.1007/978-1-4419-7589-8_2310.1007/978-1-4419-7589-8_23 ↗
44. Hrubesh LW, Pekala RW (1994) Thermal properties of organic and inorganic aerogels. J Mater Res 9:731–73810.1557/JMR.1994.0731 ↗
45. Gross J, Fricke J (1992) Ultrasonic velocity measurements in silica, carbon and organic aerogels. J Non-Cryst Sol 145:217–22210.1016/S0022-3093(05)80459-4 ↗
46. Gross J, Fricke J (1995) Scaling of elastic properties in highly porous nanostructured aerogels. Nanostructured Mater 6:905–90810.1016/0965-9773(95)00206-5 ↗