journal article·2013-02

Preparation and characterization of chemically bonded aramid-titania hybrids using isocyanatopropyltrimethoxysilane

Fakhreia Al Sagheer, Zahoor Ahmad

Publisher page

Abstract

Transparent aramid based titania hybrid films have been prepared by the sol–gel process. A mixture of m- and p-phenylenediamines was reacted with terephthaloyl chloride forming aromatic polyamide chains in dimethylacetamide solvent. The titania network was generated insitu in this matrix by the hydrolysis and condensation of the various amounts of tetraethylorthotitanate. Hybrid films with concentrations of titania varying from 2.5 to 12.5 wt% were prepared; the higher percentages of titania in the organic matrix showed a tendency towards phase separation. These films were tested for their thermo-mechanical properties. To achieve a further improvement in properties of the matrix, the aramid chain was functionalized and the inorganic network was chemically bonded using isocyanatopropyltrimethoxysilane. The bonded hybrids showed a narrower distribution of titania particles and these were distributed as a co-continuous phase. The glass transition temperature (Tg) of the hybrid films measured through dynamic mechanical analysis showed a relatively higher increase with inclusion of titania in the covalently bonded hybrids. The maximum value of Tg noted in the chemically bonded composites with 12.5 wt% titania was 361 °C and the storage modulus value was 5.214 GPa at 100 °C, showing an increase of 62 % over the pure polymer. The hybrid films with titania showed an improved UV-stability as compared to the pure polymer.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicone and Siloxane Chemistry · TiO2 Photocatalysis and Solar Cells · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Di Martino A, Sittinger M, Risbud MV (2005) Biomaterials 26:5983–599010.1016/j.biomaterials.2005.03.016 ↗
2. Arcos D, Vallet-Regi M (2010) Acta Biomater 6:2874–288810.1016/j.actbio.2010.02.012 ↗
3. Hench LL, West JK (1990) Chem Rev 90:33–7210.1021/cr00099a003 ↗
4. Wen J, Wilkes GJ (1996) Chem Mater 8:1667–168110.1021/cm9601143 ↗
5. Brinker CJ, Scherer GW (1990) Sol gel Science, The physics and chemistry of sol gel processing. Academic press, Boston
6. Schmidt H (1994) J Sol-Gel Sci Technol 1:217–23110.1007/BF00486165 ↗
7. Cassidy PE (1980) Thermally stable polymers. Marcel Dekker, New York
8. Wolfe JF (1987) In: Mark HF, Bikales NM, Overberger CG, Menges G (eds) Encyclopedia of polymer science and engineering. Wiley-Interscience, New York, p 635
9. Crichley JP, Knight GJ, Wright WW (1983) Heat resistant polymers. Pelnum Press, New York10.1007/978-1-4899-0396-9 ↗
10. Al-Sagheer F, Ali AAM, Muslim S, Ahmad Z (2006) Sci Technol Adv Mat 7:111–11810.1016/j.stam.2005.10.001 ↗
11. Saeed S, Khalil M, Ahmad Z (2009) J Macromol Sci Part A 46:152–16210.1080/10601320802594717 ↗
12. Rehman HU, Sarwar MI, Ahmad Z, Krug H, Schmidt H (1997) J Non-Cryst Solids 211:105–11110.1016/S0022-3093(96)00614-X ↗
13. Ahmad Z, Sarwar MI, Krug H, Schmidt H (1997) Die Angew Makromol Chemie 248:139–15110.1002/apmc.1997.052480109 ↗
14. Sarwar MI, Ahmad Z (2000) Eur Polym J 36:89–9410.1016/S0014-3057(99)00046-4 ↗
15. Sarwar MI, Zulfiqar S, Ahmad Z (2007) J Sol-Gel Sci Technol 44:41–4610.1007/s10971-007-1591-1 ↗
16. Zulfiqar S, Sarwar MI (2008) Scripta Mater 59:436–43910.1016/j.scriptamat.2008.04.021 ↗
17. Zhao MX, Ning YP, Mark JE (1991) Ceram Trans 19:891–898
18. Kandary Sh, Ali AAM, Ahmad Z (2005) J Appl Polym Sci 98:2521–253110.1002/app.22233 ↗
19. Al Arbash A, Ahmad Z, Al-Sagheer A, Ali AAM (2006) J Nanomater Article ID 58648.1–910.1155/JNM/2006/58648 ↗
20. Al Arbash A, Al Sagheer FA, Ali AAM, Ahmad Z (2006) Int J Polym Mater 55:103–12010.1080/009140390916477 ↗
21. Ahmad Z, Al Sagheer F, Al Arbash A, Ali AAM (2009) J Non-Cryst Solids 355:507–51710.1016/j.jnoncrysol.2009.01.019 ↗
22. Abbas S, Ahmad Z, Al Sagheer F (2009) J Sol-Gel Sci Tech 355(8):210–21810.1007/s10971-009-2025-z ↗
23. Al Sagheer F, Ahmad Z, Muslim S (2008) Int J Polym Mater 57:1–1610.1080/00914030701323760 ↗
24. Al Sagheer F, Muslim S (2010) J Nanomater Article ID 490679. 710.1155/2010/490679 ↗
25. Chen Z, Moo SS (2007) Chem Rev 107:2891–295910.1021/cr0500535 ↗
26. Ahmad Z, Sarwar MI, Mark JE (1998) J Appl Polym Sci 70:297–30210.1002/(SICI)1097-4628(19981010)70:2<297::AID-APP9>3.0.CO;2-P ↗
27. Zhang J, Lio SC, Gui L (1997) J Mater Sci 32:1469–147210.1023/A:1018553901058 ↗
28. Chen Y, Zhou S, Gu G, Limin W (2006) Polymer 47:1640–164810.1016/j.polymer.2005.12.073 ↗
29. Ahmad Z, Serwar MI, Wang S, Mark JE (1997) Polymer 38:4523–452910.1016/S0032-3861(96)01034-8 ↗
30. Reyes-Coronado D, Rodrίguez-Gattorno G, Espinosa-Pesqueira ME, Cab C, de Coss R, Oskam1 G, Nanotechnolog (2008), 19 145605. doi: 10.1088/0957-4484/19/14/14560510.1088/0957-4484/19/14/145605 ↗
31. Barbé CJ, Arendse F, Comte P, Jirousek M, Lenzmann F, Shklover V, Grätzel M (1997) J Am Ceram Soc 80:3157–317110.1111/j.1151-2916.1997.tb03245.x ↗
32. Zaban A, Aruna ST, Tirosh BA, Gregg BA, Mastai Y (2000) J Phys Chem B 104:4130–413310.1021/jp993198m ↗
33. Zhang Z, Wang CC, Zakaria R, Ying JY (1998) J Phys Chem B 102:10871–1087810.1021/jp982948+ ↗
34. Oskam G, Nellore A, Penn RL, Searson P (2003) J Phys Chem B 107:1734–173810.1021/jp021237f ↗
35. Silverstein RM, Bassler GM, Morrill TC (1991) Spectroscopic identification of organic compounds, 5th edn. Wiley, NY, p 123
36. Gunzler H, Gremlich HU (2002) IR spectroscopy–an introduction. Wiley, Germany, p 225
37. Gunzler H, Gremlich HU (2002) IR spectroscopy–an introduction. Wiley, Germany, p 246
38. Wang H, Xu P, Meng S, Zhong W, Du W, Du Q (2006) Polym Degrad Stab 91:1455–146110.1016/j.polymdegradstab.2005.10.008 ↗
39. Perrin FX, Nguyen VN, Vernet JL (2002) Polym Int 51:1013–102210.1002/pi.849 ↗
40. Xing J, Ding X (2007) J Appl Polym Sci 103:3113–311910.1002/app.25463 ↗
41. Liu X, Yu W, Pan N (2011) J Appl Polym Sci 120:552–55610.1002/app.33200 ↗
42. Dong W, Gijsman P (2010) Polym Degrad Stab 95:1054–106210.1016/j.polymdegradstab.2010.02.030 ↗
43. International Center for Diffraction Data, 12 Campus Boulevard, Newton Square, PA 19073-3273