Low-temperature versus oxygen plasma treatment of water-based TiO2 paste for dye-sensitized solar cells
Source abstract
Abstract
High-temperature treatment steps in fabrication process of dye sensitized solar cell (DSSC) significantly contribute to the manufacturing costs and limit the use of temperature sensitive substrates. Therefore our aim was to develop a simple method for the preparation of water-based TiO2 paste. The paste is based on peroxotitanic acid (PTA) sol–gel matrix and commercial TiO2 nanoparticles (P25). Two fabrication processes to decompose/transform the PTA matrix in the printed TiO2 layer are explored and combined: annealing at temperatures up to 250 °C and/or oxygen plasma treatment. The results show that the PTA matrix in the paste converts to anatase phase and to some extent also attaches to the TiO2 nanoparticles P25 acting as an interconnecting network within TiO2 layer. The transformation of the PTA matrix occurs around 250 °C, but in the presence of TiO2 nanoparticles P25 it starts already at 120 °C. In addition the results reveal that the crystallization is achievable also solely with the oxygen plasma treatment. The efficiency of the TiO2 layers, exposed to different post-deposition treatments, is evaluated in DSSCs. The results show that oxygen plasma treatment of the TiO2 layers could efficiently replace temperature curing at 250 °C. Within this study the DSSCs with the efficiency up to 4.2 % measured under standard test conditions (1,000 W/m2, AM1.5, 25 °C) were realized.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques · Pigment Synthesis and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. O’Regan B, Grätzel M (1991) A low–cost, high efficiency solar cells based on dye-sensitized colloidal TiO2 films. Nature 353:737–74010.1038/353737a0 ↗
2. Hinsch A, Veurman W, Brandt H, Loayza Aguirre R, Bialecka K, Flarup Jensen K (2012) Worldwide first fully up-scaled fabrication of 60 × 100 cm2 dye solar module prototypes. Prog Photovolt Res Appl 20:698–71010.1002/pip.1213 ↗
3. Hočevar M, Opara Krašovec U, Bokalič M, Topič M, Veurman W, Brandt H, Hinsch A (2013) Sol-gel based TiO2 paste applied in screen-printed dye-sensitized solar cells and modules. J Ind Eng Chem 19:1464–146910.1016/j.jiec.2012.12.046 ↗
4. Hočevar M, Berginc M, Opara Krašovec U, Topič M (2012) In: Aparicio M, Jitianu A, Klein LC (eds) Sol–gel processing for conventional and alternative energy. Springer, New York
5. Hagfeldt A, Boschloo G, Sun L, Kloo L, Pettersson H (2010) Dye-sensitized solar cells. Chem Rev 110:6595–666310.1021/cr900356p ↗
6. Miettunen K, Halme J, Lund P (2013) Metallic and plastic dye solar cells. WIREs Energy Environ 2:104–12010.1002/wene.46 ↗
7. Lee KM, Hsu YC, Ikegami M, Miyasaka T, Thomas KRJ, Lin JT, Ho KC (2011) Co-sensitization promoted light harvesting for plastic dye-sensitized solar cells. J Power Sources 196:2416–242110.1016/j.jpowsour.2010.10.041 ↗
8. Weerasinghea HC, Sirimanne PM, Franks GV, Simon GP, Cheng YB (2010) Low temperature chemically sintered nano-crystalline TiO2 electrodes for flexible dye-sensitized solar cells. J Photochem Photobiol A Chem 213:30–3610.1016/j.jphotochem.2010.04.016 ↗
9. Kalyanasundaram K (2010) Dye-sensitized solar cells. EPFL Press, Lausanne10.1201/b16409 ↗
10. Yamaguchi T, Tobe N, Matsumoto D, Nagai T, Arakawa H (2010) Highly efficient plastic-substrate dye-sensitized solar cells with validated conversion efficiency of 7.6%. Sol Energ Mat Sol C 94:812–81610.1016/j.solmat.2009.12.029 ↗
11. Yella A, Lee H-W, Tsao HN, Yi C, Chandiran AK, Nazeeruddin MK, Diau EW-G, Yeh C-Y, Zakeeruddin SM, Grätzel M (2011) Porphyrin-sensitized solar cells with cobalt (II/III)–based redox electrolyte exceed 12 percent efficiency. Science 334:629–63410.1126/science.1209688 ↗
12. He X-L, Liu M, Yang G-J, Yao H-L, Fan S-Q, Li C-J (2013) Photovoltaic performance degradation and recovery of the flexible dye-sensitized solar cells by bending and relaxing. J Power Sources 226:173–17810.1016/j.jpowsour.2012.10.056 ↗
13. Yen W-H, Hsieh C-C, Hung C-Y, Wang H-W, Tsui M-C (2010) Flexible TiO2 working electrode for dye-sensitized solar cells. J Chin Chem Soc 57:1162–116610.1002/jccs.201000167 ↗
14. Lin L-Y, Lee C-P, Tsai K-W, Yeh M-H, Chen C-Y, Vittal R, Wu C-G, Ho K-C (2012) Low-temperature flexible Ti/TiO2 photoanode for dye-sensitized solar cells with binder-free TiO2 paste. Prog Photovolt Res Appl 20:181–19010.1002/pip.1116 ↗
15. Gutiérrez-Tauste D, Zumeta I, Vigil E, Hernández-Fenollosa MA, Domènech X, Ayllón JA (2005) New low-temperature preparation method of the TiO2 porous photoelectrode for dye-sensitized solar cells using UV irradiation. J Photochem Photobiol A Chem 175:165–17110.1016/j.jphotochem.2005.04.031 ↗
16. Zhang D, Yoshida T, Minoura H (2003) Low-temperature fabrication of efficient porous titania photoelectrodes by hydrothermal crystallization at the solid/gas interface. Adv Mater 15:814–81710.1002/adma.200304561 ↗
17. Li Y, Yoo K, Lee D-K, Kim JH, Park N-G, Kim K, Ko MJ (2010) Highly bendable composite photoelectrode prepared from TiO2/polymer blend for low temperature fabricated dye-sensitized solar cells. Curr Appl Phys 10:E171–E17510.1016/j.cap.2010.01.014 ↗
18. Lindström H, Holmberg A, Magnusson E, Malmqvist L, Hagfeldt A (2001) A new method to make dye-sensitized nanocrystalline solar cells at room temperature. J Photochem Photobiol A Chem 145:107–11210.1016/S1010-6030(01)00564-0 ↗
19. Lindström H, Holmberg A, Magnusson E, Lindquist SE, Malmqvist L, Hagfeldt A (2001) A new method for manufacturing nanostructured electrodes on plastic substrates. Nano Lett 1:97–10010.1021/nl0055254 ↗
20. Dürr M, Schmid A, Obermaier M, Rosselli S, Yasuda A, Nelles G (2005) Low-temperature fabrication of dye-sensitized solar cells by transfer of composite porous layers. Nat Mater 4:607–61110.1038/nmat1433 ↗
21. Ge L, Xu MX, E L, Tian YM, Fang HB (2005) Preparation of TiO2 thin films using inorganic peroxo titanic complex and autoclaved sols as precursors. Key Eng Mater 280:809–81210.4028/www.scientific.net/KEM.280-283.809 ↗
22. Modic M, Junkar I, Vesel A, Mozetič M (2012) Aging of plasma treated surfaces and their effects on platelet adhesion and activation. Surf Coat Technol 213:98–10410.1016/j.surfcoat.2012.10.026 ↗
23. De Geyter N, Morent R, Leys C (2008) Influence of ambient conditions on the ageing behaviour of plasma-treated PET surfaces. Nucl Instrum Methods Phys Res B 266:3086–309010.1016/j.nimb.2008.03.167 ↗
24. Mozetič M (2011) Extremely non-equilibrium oxygen plasma for direct synthesis of metal oxide nanowires on metallic substrates. J Phys D Appl Phys 44:1–910.1088/0022-3727/44/17/174028 ↗
25. Mancini SD, Nogueira AR, Rangel EC, Da Cruz NC (2013) Solid-state hydrolysis of postconsumer polyethylene terephthalate after plasma treatment. J Appl Polym Sci 127:1989–199610.1002/app.37591 ↗
26. Eleršič K, Junkar I, Modic M, Zaplotnik R, Vesel A, Cvelbar U (2011) Modification of surface morphology of graphite by oxygen plasma treatment. Mater Tehnol 45:232–239
27. Liu R, Yang WD, Qiang LS (2012) Enhanced efficiency for dye-sensitized solar cells using a surface-treated photo-anode. J Power Sources 199:418–42510.1016/j.jpowsour.2011.10.072 ↗
28. Li Y, Ding JN, Yuan NY, Bai L, Hu HW, Wang XQ (2013) The influence of surface treatment on dye-sensitized solar cells based on TiO2 nanofibers. Mater Lett 97:74–7710.1016/j.matlet.2013.01.106 ↗
29. Tak Kim J, Ho Kim S (2011) Surface modification of TiO2 electrode by various over-layer coatings and O2 plasma treatment for dye sensitized solar cells. Sol Energ Mat Sol C 95:336–33910.1016/j.solmat.2010.04.045 ↗
30. Wang J, Lin ZQ (2010) Dye sensitized TiO2 nanotube solar cells with markedly enhanced performance via rational surface engineering. Chem Mater 22:579–58410.1021/cm903164k ↗
31. Berginc M, Opara Krašovec U, Hočevar M, Topič M (2008) Performance of dye-sensitized solar cells based on Ionic liquids: effect of temperature and iodine concentration. Thin Solid Films 516:7155–715910.1016/j.tsf.2007.12.003 ↗
32. Hočevar M, Opara Krašovec U, Berginc M, Dražić G, Hauptman N, Topič M (2008) Development of TiO2 pastes modified with Pechini sol-gel method for high efficiency dye-sensitized solar cell. J Solgel Sci Technol 48:156–16210.1007/s10971-008-1763-7 ↗
33. Zaplotnik R, Vesel A, Mozetic M (2013) A powerful remote source of O atoms for the removal of hydrogenated carbon deposits. J Fusion Energy 32:78–8710.1007/s10894-012-9530-8 ↗
34. Hočevar M, Opara Krašovec U, Berginc M, Topič M (2010) One step preparation of TiO2 layer for high efficiency dye-sensitized solar cell. Acta Chim Slov 57:405–409
35. Drev M, Opara Krašovec U, Hočevar M, Berginc M, Kržmanc Maček M, Topič M (2011) Pechini based titanium sol as a matrix in TiO2 pastes for dye-sensitized solar cell application. J Solgel Sci Technol 59:245–25110.1007/s10971-011-2490-z ↗
36. Hočevar M, Berginc M, Topič M, Opara Krašovec U (2010) Sponge-like TiO2 layers for dye-sensitized solar cells. J Solgel Sci Technol 53:647–65410.1007/s10971-009-2144-6 ↗
37. Ge L, Xu MX, Sun M, Fang HB (2006) Low-temperature synthesis of photocatalytic TiO2 thin film from aqueous anatase precursor sols. J Solgel Sci Technol 38:47–5310.1007/s10971-006-6009-y ↗
38. Ge L, Xu MX (2007) Fabrication and characterization of TiO2 photocatalytic thin film prepared from peroxo titanic acid sol. J Solgel Sci Technol 43:1–710.1007/s10971-007-1545-7 ↗
39. Mor GK, Shankar K, Paulose M, Varghese OK, Grimes CA (2006) Use of highly-ordered TiO2 nanotube arrays in dye-sensitized solar cells. Nano Lett 6:215–21810.1021/nl052099j ↗
40. Tsoi S, Fok E, Sit JC, Veinot JGC (2004) Superhydrophobic, high surface area, 3-D SiO2 nanostructures through siloxane-based surface functionalization. Langmuir 20:10771–1077410.1021/la0482507 ↗