journal article·2006-01-01

Semi-analytical process modelling and simulation of air bending

B Heller, M Kleiner

Publisher page

Abstract

Mathematical models for a fast semi-analytica simulation of the air bending process of thin as well as of thick sheets have been developed, implemented, and successfully been tested. In contrast to a large number of available approaches in this field that – for reasons of assuming the neutral fibre to coincide with the central fibre and the sheet thickness to remain constant – are limited to thin sheets, in the present work special attention has been paid to the mathematical description of the shift of individual fibres and the changes of thickness. The adequate modelling of these two effects is essential to ensure that the resulting simulation procedure is applicable in the same way to the bending of thin and, in particular, of thick sheets. The realistic mathematical modelling of the forming process, the accuracy of the results, and the very short computation times permission the simulation system to be used in production-related applications, such as CAPP systems, virtual prototyping environments, and machine control systems, in which commercial finite element analysis software can be utilized either not all or only in a limited way.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Advanced Surface Polishing Techniques · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

University of Dortmund Institute of Forming Technology and Lightweight Construction Dortmund, Germany

References (61)

Show source-provided references
1. Streppel A. H., Lutters D., ten Brinke E., Pijlman H. H., Kals H. J. J. Process modelling for air bending: Validation by experiments and simulation. In Sheet Metal 1999, Proceedings of the 7th International Conference on Sheet Metal , Erlangen-Nürnberg, Germany, 27–28 September 1999, pp. 169–176.
2. 10.1016/S0261-3069(99)00051-510.1016/S0261-3069(99)00051-5 ↗
3. 10.1007/978-3-662-10686-010.1007/978-3-662-10686-0 ↗
4. Kirchhoff M. · Fertigungstechnik und Betrieb · 1985 · 35
5. 10.1007/BF0260797110.1007/BF02607971 ↗
6. 1991
7. Reissner J. · Maschinenmarkt · 1978 · 84 · 552
8. Nadai A. A theory of flow and fracture of solids, 1950.
9. 10.1016/0022-5096(52)90002-110.1016/0022-5096(52)90002-1 ↗
10. Maevus F. Rechnerintegrierte Blechteilefertigung am Beispiel des Gesenkbiegens. PhD Thesis, University of Dortmund, Germany, 1993.
11. Kleiner M. · Prod. Engng · 2000 · 7 · 53
12. Finckenstein E. v. · Prod. Engng · 1997 · 4 · 109
13. 10.1007/978-3-662-40293-110.1007/978-3-662-40293-1 ↗
14. Tresca H. · C. R. Acad. Sci. Paris · 1864 · 59 · 754f
15. Blech Rohre Profile · 1998 · 45 · 34
16. Sangdahl G. S. · Proc. Soc. Expl Stress Analysis · 1948 · 6
17. Oehler G. · 1963
18. Oehler G. · Werkstatttechnik · 1944 · 38 · 157
19. Wolter K.-H. · Mitt. Forsch. ges. Blechverarbeitung · 1950 · 29 · 1
20. Lubahn J. D. · Trans. ASME · 1950 · 72 · 201
21. 10.1016/S0007-8506(07)61638-210.1016/S0007-8506(07)61638-2 ↗
22. 10.1002/srin.19710267010.1002/srin.197102670 ↗
23. 10.1002/srin.19710267110.1002/srin.197102671 ↗
24. Schwark H.F. Rückfederung an bildsam gebogenen Blechen. PhD Thesis, Technical University of Hannover, Germany, 1952.
25. Press W. H. · 1995
26. 10.1016/0020-7403(94)90050-710.1016/0020-7403(94)90050-7 ↗
27. Elkins K. L. · J. Mf. Sci. Engng · 1999 · 121 · 679
28. Oualline S. Practical C++ Programming , 1997, O'Reilly.
29. Stroustrup B. · 1998
30. N. N. · 1994
31. N. N. · 1992
32. N. N. · 1994
33. Austerhoff N. Integrierte Produkt- und Prozessgestaltung für die Herstellung von Blechbiegeteilen. PhD Thesis, University of Dortmund, Germany, 1999.
34. Streisselberger A. · Blech Rohre Profile · 1997 · 45 · 41
35. Ludwik P. · Technische Blätter · 1903 · 35 · 133
36. Heller B. Halbanalytische Prozess-Simulation des Freibiegens von Fein- und Grobblechen. PhD Thesis, University of Dortmund, Germany, 2002.
37. Wolter K. H. · 1952
38. Hill R. · 1983
39. Proksa F. Zur Theorie des plastisches Blechbiegens bei großen Formänderungen. PhD Thesis, Technical University of Hannover, Germany, 1958.
40. Bauschinger J. · Ziviling · 1881 · 18 · 299
41. Bauschinger J. · Mitt. Mech.-Techn. Lab. K. Techn. Hochsch. München · 1886 · 13 · 1
42. 10.1007/BF0053215210.1007/BF00532152 ↗
43. 10.1007/BF0053657710.1007/BF00536577 ↗
44. Crafoord R. Plastic sheet bending. PhD Thesis, Chalmers University of Göteborg, Sweden, 1970.
45. 10.1016/0020-7403(75)90061-210.1016/0020-7403(75)90061-2 ↗
46. 10.1115/1.318582310.1115/1.3185823 ↗
47. 10.1016/0020-7403(94)00069-V10.1016/0020-7403(94)00069-V ↗
48. 10.1016/0924-0136(94)01596-S10.1016/0924-0136(94)01596-S ↗
49. Nicklas G. Das Biegen von Blechen anhand einer Biegung in V-Gesenken. PhD Thesis, VDI, Düsseldorf, 1976.
50. Andreen O., Crafoord R. Calculation of springback of sheet metal bends. In Advanced Technology of Plasticity, Proceedings of the 1st International Conference on The Technology of Plasticity , Tokyo, Vol. 1, 1984.
51. Meier M., Haenni E., Reissner J. Simulation des Biegeprozesses und seine Anwendung auf die selbstkorrigierende Dreipunktbiegemaschine. In VDI-Berichte 522, 1984, pp. 199–210 (VDI, Düsseldorf).
52. Müller-Duysing M. Die Berechnung und adaptive Steuerung des Drei-Punkt-Biegens. PhD Thesis, Swiss Federal Institute of Technology, Zürich, Switzerland, 1993.
53. Kahl K.W. Untersuchungen zur Verbesserung der Form- und Maßgenauigkeit beim Biegen von Blechen. PhD Thesis, University of Dortmund, Germany, 1985.
54. Rothstein R. Einsatz der Prozeßsimulation zur Analyse und Weiterentwicklung von Gesenkbiegeverfahren. PhD Thesis, University of Dortmund, Germany, 1990.
55. 10.1016/0924-0136(93)90164-210.1016/0924-0136(93)90164-2 ↗
56. Lutters D., Streppel A. H., Huétink J., Kals H. J. J. A process simulation for air bending In Sheet Metal 1995, Proceedings of the 3rd International Conference on Sheet Metal, Belfast, Ireland, 26–28 June 1995, pp. 145–154.
57. Sulaiman H. Erweiterung der Einsetzbarkeit von Gesenkbiegepressen durch die Entwicklung von Sonderwerkzeugen. PhD Thesis, University of Dortmund, Germany, 1995.
58. Streppel A. H., Lutters D., ten Brinke E., Pijlman H. H., Kals H. J. J. Process modelling for air bending: Equilibrium model and FEM-simulation. In Sheet Metal 1999, Proceedings of the 7th International Conference on Sheet Metal , Erlangen-Nürnberg, Germany, 27–28 September 1999, pp. 161–168.
59. Raible O. · Blech Rohre Profile · 1980 · 27 · 657
60. Magnusson C., Tan Z. Mathematical modeling of v-die bending process. In Sheet Metal in Forming Processes, 16th Biennial Congress of the International Deep Drawing Research Group (IDDRG), Borlaenge, Sweden, 11–13 June 1990, pp. 363–370.
61. Ohki A. · SEAISI Q. · 1991 · 20 · 55