Finite element modelling of the interaction of residual stress with mechanical load for a crack emanating from a cold worked fastener hole
Source abstract
Abstract
Abstract A three-dimensional finite element simulation has been conducted for the cold working of a fastener hole in an aluminium plate. The simulation predicts the residual stress distribution resulting from the cold working process where an oversize mandrel is pulled though the fastener hole. Following the cold working simulation, unidirectional tensile mechanical load is applied to the plate and the resulting redistribution of stress predicted. Parallel through-the-thickness cracks emanating from the hole are then introduced into the model and crack opening displacements and stress intensity factors are predicted along the crack front as a function of applied mechanical load. The finite element simulation shows that cold working has a beneficial effect by reducing the stress intensity factor for a crack under applied mechanical load compared to a non-cold-worked plate. However, this improvement is less than would be expected if the cold working process is idealized as the application of a uniform radial expansion at the hole edge.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
University of Bristol Department of Mechanical Engineering
References (23)
Show source-provided references
1. 10.1016/0013-7944(74)90025-310.1016/0013-7944(74)90025-3 ↗
2. Mann J. Y., Jost G. S. Stress fields associated with interference fitted and cold-expanded holes. Metal Forum, 1983, 6 (1), 43–53.
3. FTI. Extending the Fatigue Life of Metal Structures Materials Testing Fatigue Technology Inc. 150 Andover Park West Seattle Washington USA 1991.
4. Ozdemir A. T. Cook R. Edwards L. Residual stress distributions around cold expanded holes. In ICAF Symposium Stockholm 1993.
5. 10.1243/03093247V30429110.1243/03093247V304291 ↗
6. Poolsuk S. Measurement of the elastic-plastic boundary around coldworked fastener holes. PhD dissertation Department of Metallurgy Mechanics and Material Science University of Michigan USA 1977.10.1115/1.3424354 ↗
7. McNeill W. A. Heston A. W. Coldworking fastener holes—theoretical analysis methods of coldworking experimental results. In Proceedings of the ASM Conference on Residual Stresses in Design Process and Materials Selection Cincinnati Ohio 27–29 April 1987 pp. 193–203.
8. Adler W. F. Dupree D. M. Stress analysis of cold-worked fastener holes. Technical Report AFML-TR-74–44 Wright-Patterson Air Force Base Ohio 1974.
9. Armen H. Levy A. Eidinoff H. L. Elastic-plastic behaviour of coldworked holes. Presented at the Structural Dynamics and Materials Conference 1983 paper 83–0865-CF.10.2514/6.1983-865 ↗
10. 10.1016/0308-0161(91)90055-710.1016/0308-0161(91)90055-7 ↗
11. Rufin A. C. Extending the fatigue life of aircraft engine components by hole cold expansion technology. ASME paper 92-GT-77 1992.10.1115/92-GT-077 ↗
12. Forgues S. A., Bernard M., Bui-Quoc T. 3D axi-symmetric numerical analysis and experimental study of the fastener hole coldworking process. In Computer Methods and Experimental Measurements for Surface Treatment Effects (Eds Aliabadi M. H., Brebbia C. A.), 1993, pp. 61–70 (Computational Mechanics Publications).
13. 10.1243/030932497151341810.1243/0309324971513418 ↗
14. 10.1115/1.322479010.1115/1.3224790 ↗
15. 10.1016/0013-7944(79)90122-X10.1016/0013-7944(79)90122-X ↗
16. 10.1520/STP37074S10.1520/STP37074S ↗
17. 10.1016/0013-7944(83)90152-210.1016/0013-7944(83)90152-2 ↗
18. 10.1016/0029-5493(89)90275-610.1016/0029-5493(89)90275-6 ↗
19. 10.1016/0013-7944(90)90285-O10.1016/0013-7944(90)90285-O ↗
20. ABAQUS User's Manual Version 4.9 Hibbitt Karlsson and Sorensen Inc. 1989.
21. Poussard C. G. C. An analysis of residual stresses and fatigue behaviour of cracks emanating from cold worked fastener holes. PhD thesis University of Bristol 1995.
22. 10.1111/j.1460-2695.1989.tb00563.x10.1111/j.1460-2695.1989.tb00563.x ↗
23. 10.1002/sapm19563516010.1002/sapm195635160 ↗