journal article·1992-04-01

Interpretation of residual stress distributions in previously loaded cracked beams

D J Smith, M A M Bourke, A P Hodgson, G A Webster, P J Webster

Publisher page

Abstract

The measurement and prediction of residual stress distributions in a fatigue pre-cracked and a plastically overloaded A533B steel beam are described. The residual stresses were obtained experimentally using the neutron diffraction technique. Finite element analysis was employed to predict the elastic-plastic response and residual stresses introduced after overloading. Comparison of the experimental results have been made with the finite element predictions (for both plane stress and strain conditions) averaged over the same sampling volume used to make the neutron diffraction measurements. It has been found that good agreement is achieved away from the near crack tip region. However, close to the crack tip the measured compressive residual stresses are significantly smaller than predicted. This difference is attributed to the A533B steel exhibiting a Bauschinger effect and yielding at a lower stress after a stress reversal.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fatigue and fracture mechanics · Non-Destructive Testing Techniques · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, University of Bristol, UK

Department of Mechanical Engineering, Imperial College of Science, Technology, and Medicine, London, UK

Nuclear Electric, Barnwood, UK

Department of Civil Engineering, University of Salford, UK

References (17)

Show source-provided references
1. BS5500: 1980, Specification of unfired fusion welded pressure vessels, British Standard Institution.
2. 10.1016/0308-0161(90)90120-710.1016/0308-0161(90)90120-7 ↗
3. 10.1016/0308-0161(83)90013-310.1016/0308-0161(83)90013-3 ↗
4. 10.1016/0308-0161(90)90121-W10.1016/0308-0161(90)90121-W ↗
5. 10.1007/BF0003450710.1007/BF00034507 ↗
6. Chell G. G. · 101
7. 10.1016/0308-0161(90)90122-X10.1016/0308-0161(90)90122-X ↗
8. 10.1520/STP17171S10.1520/STP17171S ↗
9. 10.1520/STP17176S10.1520/STP17176S ↗
10. 10.1080/0001873850010179110.1080/00018738500101791 ↗
11. 10.1243/03093247V23420110.1243/03093247V234201 ↗
12. Bourke M. A. M., Smith D. J., Webster G. A., Webster P. J. ‘Neutron diffraction measurements of residual stresses in plastically deformed cracked beams’, Proceedings of the 9th International Conference on Experimental Mechanics, 1990, 1196–1206.
13. Rees D. W. A. ‘Anisotropic hardening theory and the Bauschinger effect’, J. Strain Analysis, 1981, 85–95.10.1243/03093247V162085 ↗
14. BS 5762: 1979, Method for crack opening displacement (COD) testing, British Standards Institution.
15. Smith I. J. · Weld Inst. Res. Bull. · 1981 · 5
16. Smith I. J. ‘Finite elements for the fracture mechanics analysis of welds’, Proc. 1st International Conference on Computer technology in welding, London 1986.
17. 10.1016/0308-0161(88)90003-810.1016/0308-0161(88)90003-8 ↗