journal article·2019-10Open access

Effect of different helmet shell configurations on the protection against head trauma

Marta Palomar, Ricardo Belda, Eugenio Giner

Abstract

Head trauma following a ballistic impact in a helmeted head is assessed in this work by means of finite element models. Both the helmet and the head models employed were validated against experimental high-rate impact tests in a previous work. Four different composite ply configurations were tested on the helmet shell, and the energy absorption and the injury outcome resulting from a high-speed impact with full metal jacket bullets were computed. Results reveal that hybrid aramid–polyethylene configurations do not prevent bullet penetration at high velocities, while 16-layer aramid configurations are superior in dissipating the energy absorbed from the impact. The fabric orientation of these laminates proved to be determinant for the injury outcome, as maintaining the same orientations for all the layers led to basilar skull fractures (dangerous), while alternating orientation of the adjacent plies resulted in an undamaged skull. To the authors knowledge, no previous work in the literature has analysed numerically the influence of different stack configurations on a single combat helmet composite shell on human head trauma.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Automotive and Human Injury Biomechanics · Traumatic Ocular and Foreign Body Injuries

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Centre of Research in Mechanical Engineering – CIIM, Department of Mechanical and Materials Engineering, Universitat Politècnica de València, Camino de Vera, Valencia, Spain

Funding

Ministerio de Economía y Competitividad · Generalitat Valenciana

References (30)

Show source-provided references
1. 10.7205/MILMED-D-12-0035310.7205/MILMED-D-12-00353 ↗
2. 10.15376/biores.11.3.7282-729510.15376/biores.11.3.7282-7295 ↗
3. 10.1016/j.compstruct.2013.02.01410.1016/j.compstruct.2013.02.014 ↗
4. 10.1115/1.400433210.1115/1.4004332 ↗
5. 10.1016/j.forsciint.2018.01.01410.1016/j.forsciint.2018.01.014 ↗
6. 10.1016/j.compositesb.2016.02.05310.1016/j.compositesb.2016.02.053 ↗
7. 10.1016/j.ijimpeng.2017.08.01110.1016/j.ijimpeng.2017.08.011 ↗
8. 10.1097/01.TA.0000133575.48065.3F10.1097/01.TA.0000133575.48065.3F ↗
9. 10.7150/ijms.807910.7150/ijms.8079 ↗
10. 10.1111/1556-4029.1257010.1111/1556-4029.12570 ↗
11. 10.1016/j.ijimpeng.2015.08.01410.1016/j.ijimpeng.2015.08.014 ↗
12. 10.1016/S0263-8223(00)00138-010.1016/S0263-8223(00)00138-0 ↗
13. 10.1016/j.ijimpeng.2011.12.00710.1016/j.ijimpeng.2011.12.007 ↗
14. Van Hoof J
15. 10.1016/0734-743X(94)00039-Y10.1016/0734-743X(94)00039-Y ↗
16. 10.1016/j.compstruct.2016.12.05710.1016/j.compstruct.2016.12.057 ↗
17. 10.1002/cnm.296210.1002/cnm.2962 ↗
18. 10.1089/neu.1995.12.65910.1089/neu.1995.12.659 ↗
19. 10.4271/77092210.4271/770922 ↗
20. 10.1016/j.compstruct.2018.05.07610.1016/j.compstruct.2018.05.076 ↗
21. Dassault Systèmes. Abaqus 6.12 User’s Manual, 2012, http://130.149.89.49:2080/v6.12/pdf_books/CAE.pdf
22. Dassault Systèmes. Section 1.2.19 VUSDFLD, Abaqus user subroutines reference Manual, 2012, http://130.149.89.49:2080/v6.11/pdf_books/USERSUB.pdf
23. 10.1016/j.jmbbm.2015.11.01410.1016/j.jmbbm.2015.11.014 ↗
24. 10.1016/j.ijimpeng.2012.06.00310.1016/j.ijimpeng.2012.06.003 ↗
25. 10.1016/j.matdes.2016.08.01510.1016/j.matdes.2016.08.015 ↗
26. 10.1016/j.ijimpeng.2014.07.00410.1016/j.ijimpeng.2014.07.004 ↗
27. 10.1016/j.proeng.2015.04.04310.1016/j.proeng.2015.04.043 ↗
28. 10.1016/j.ijimpeng.2007.03.00810.1016/j.ijimpeng.2007.03.008 ↗
29. Tse K
30. Wiśniewski A · Prob Mech Armam Aviat Safe Eng · 2014 · 16 · 19