journal article·2014-05

AlN-(TiCr)B2 ion-plasma coating for cutting tools of cBN-based polycrystalline superhard material

S. A. Klimenko, I. A. Podchernjaeva, V. M. Beresnev, V. M. Panashenko, S. An. Klimenko, M. Yu. Kopeikina

Journal of Superhard Materials· Volume 36· Issue 3
Publisher page

Abstract

The microstructure and oxidation kinetics of the surface layers of AlN-(TiCr)B 2 coating produced by magnetron RF sputtering have been studied in the course of the coating formation and use in tools of cBN-based polycrystalline superhard materials in machining ShKh 15 hardened steel. The coating is formed with the liquid phase present. After cutting the formation of two-layer tribofilm with a nanosized external layer has been revealed on the surface of the cutting insert. The tribofilm phase composition has been defined by a layer-by-layer Auger analysis. The film external nanosized layer is a glassy phase as solid solutions of Fe 2 O 3 -Al 2 O 3 oxides that acts as a solid lubricant. As the cutting speed increases, the wear rate of a tool with a coating has been found to decrease as compared with tools without a coating.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Donnet, C. and Erdemir, A., Historical developments and new trends in tribological and solid lubricant coatings, Surf. Coat.Tech., 2007, vols. 180–181, pp. 76–84.
2. Franz, R. and Mitterer, Ch., Vanadium-containing self-adaptive low-friction hard coatings for high-temperature applications: a review, Ibid., 2013, vol. 228, pp. 1–13.10.1016/j.surfcoat.2013.04.034 ↗
3. Kato, H. and Komai, K., Tribofilm formation and mild wear by tribo-sintering of nanometer-sized oxide particles on rubbing steel surfaces, Wear, 2007, vol. 262, nos. 1–2, pp. 36–41.10.1016/j.wear.2006.03.046 ↗
4. Dosbaeva, G.K., Veldhuis, S.C., Yamamoto, K., Wilkinson, D.S., Beake, B.D., Jenkins, N., Elfizy, A., and Fox-Rabinovich, G.S., Oxide scales formation in nano-crystalline TiAlCrSiYN PVD coatings at elevated temperature,Int. J. Refract. Metals Hard Mater., 2010, vol. 28, no. 1, pp. 133–141.10.1016/j.ijrmhm.2009.09.003 ↗
5. Bezhenar, M.P., Scientific principles of sintering cubic born nitride composites at high pressure, Dr. Sci. (Eng.) dissertation, Kiev: ISM, 2002.
6. Sverkhtverdye materialy. Poluchenie i primenenie (Superhard Materials. Production and Application), 6 vols., Novikov, N.V., Ed., vol. 5: Obrabotka materialov lezviinym instrumentom (Machining Materials with Cutting Tools), Klimenko, S.A., Ed., Kiev: Bakul’ ISM, National Academy of Sciences of Ukraine, 2006.
7. Klimenko, S.A., Beresnev, V.M., Kopeikina, M.Yu., and Gritsenko, V.I., Ti-NbN-Al2O3 and Nb-NbN-Al2O3 layered vacuum-arc coatings on tools equipped with cubic boron nitride-based polycrystalline superhard materials, Fizicheskaya Inzheneriya Poverkhnosti, 2007, vol. 5, nos. 1–2, pp. 57–61.
8. Soroka, E., Lyashenko, B., Shengru, Qiao, and Chengyu, Zhang, Tribological behaviour and cutting performance of PVD-TiN coating/substrate system with discontinuous surface architecture, Rare Metal Mater. Eng., 2011, vol. 40, no. 4, pp. 580–584.10.1016/S1875-5372(11)60028-3 ↗
9. Grigor’ev, S.N., Methods of the deposition of wear resistant nanocoatings in a tool production, Metallurgiya Mashinostroeniya, 2011, no.1, pp. 37–43.
10. Reshetnyak, E.N. and Strel’nitskii, V.E., Synthesis of strengthening nanostructural coatings, Voprosy atomnoi nauki i techniki, Ser. Fizika radiatsionnykh povrezhdenii i radiatsionnoe materialovedenie, 2008, no. 2, pp. 119–130.
11. Voevodin, A. and Zabinski, J., Supertough wear-resistant coatings with’ chameleon’ surface adaptation, Thin Solid Films, 2000, vol. 370, pp. 223–231.10.1016/S0040-6090(00)00917-2 ↗
12. Barthelmä, F., Frank, H., Mahr, P., and Reich, S., Oxygen-improved hard coatings for high performance cutting processes, Procedia CIRP, 2012, no. 1, pp. 208–213.
13. Panasyuk, A.D., Podchernyaeva, I.A., Boltovets, N.S., Rudenko, O.V., Ivanov, V.N., and Teplenko, M.A., Structures and properties of thin ceramic coatings in the AlN-(TiCr)B2 system, Powder Metallurgy Metal Ceramics, 2006, vol. 45, nos. 5–6, pp. 39–47.
14. Beresnev, V.M., Kopeikina, M.Yu., and Klimenko, S.A., Multicomponent and multilayer vacuum-arc coatings for cutting tools, Voprosy atomnoi nauki i techniki, Ser. Vacuum, pure materials, superconductors, 2008, no. 1, pp. 152–158.
15. Podchernjaeva, I.A., Dukhota, A.I., Panashenko, V.M., et al., Kinetics and mechanism of fretting corrosion of electrical discharge and laser and electrical discharge ZrB2-containing coating on a VT3-1 alloy, Problemy tribologii, 2012, no. 1, pp. 62–71.
16. Podchernjaeva, I.A., Panasyuk, A.D., and Panashenko, V.M., Formation of the secondary structure on ZrB2-containing laser and electrical discharge coating on titanium alloy in wearing by a mildly fixed abrasive, Dopovidi NAS Ukraine, 2009, no. 9, pp. 109–113.
17. Lavrenko, V.O., Panasyuk, A.D., Grigor’ev, O.M., Korotaev, O.V., and Kotenko, V.A., Special features of high-temperature (up to 1600°C) oxidation in air of ceramic materials of the ZrB2-MoSi2 system, Powder Metallurgy Metal Ceramics, 2012, no. 1/2, pp. 131–135.
18. Boshitskaya, N.V., Podchernjaeva, I.A., Lavrenko, V.A., et al., Functional combined biocoating on the VT-6 alloy, ibid., 2013, no. 9/10, pp. 82–93.
19. Lavrenko, V.O., Shvets’ V.A., Talash, V.M., Kotenko, V.A., and Khomko, T.V., Electrochemical oxidation of ceramic materials of the ZrB2-MoSi2 system in 3% water solution of NaCl., Ibid., 2011, no. 11/12, pp. 89–94.
20. Berezhnoi, A.S., Mnogokomponentnye sistemy oksidov (Multicomponent system of oxides), Kiev: Naukova Dumka, 1970.