journal article·2017-01

Temperatures during the dry cutting of titanium alloy using diamond composites with ceramic bonding phases

L. Jaworska, W. Zebala, P. Rutkowski, S. Cygan, P. Klimczyk, P. Putyra

Journal of Superhard Materials· Volume 39· Issue 1
Publisher page

Abstract

In this paper the thermal properties of diamond composites with ceramic bonding phases, such as the Ti–Si–C system with nanometric Ti(CN) and TiB 2 are presented. The thermal conductivities of the materials were analyzed by the laser pulse method. In addition, computational simulations of the temperature dependence on the distance from the cutting edge were performed according to the finite element method for the investigated composites, commercial PCD, and hypothetical diamond monocrystal. Two cutting speeds were considered during the numeric computations: 100 and 200 m/min. To verify the simulations, the TNGA 160408 cutting insert, which was prepared from the investigated diamond composites and commercial material, was employed. Dry turning tests of titanium alloy were conducted. The temperatures during the machining processes were observed using a thermovision camera, and the surface roughness was measured after the tests. The computational simulations confirmed the strong dependence between the thermal properties of the cutting material and the temperatures within the cutting zone. The temperature measurements during the dry cutting tests reveal significantly higher temperatures than the temperature measurements achieved during the simulations.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Tunneling and Rock Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Burns, R.C., Hansen, J.O., Spits, R.A., Sibanda, M., Welbourn, C.M., and Welch, D.L. Growth of high purity large synthetic diamond crystals, Diamond Relat. Mater., 1999, vol. 89, pp. 1433–1437.10.1016/S0925-9635(99)00042-4 ↗
2. Hall, H.T., Sintered diamonds: A synthetics carbonado, Science, 1970, vol. 169, no. 3948, pp. 868–869.10.1126/science.169.3948.868 ↗
3. Katzman, H. and Libby, W.F., Sintered diamond compacts with a cobalt binder, Ibid., 1974, vol. 172, pp. 1132–1134.
4. Hibbs, L.E., Jr. and Wentorf, R.H., Jr., High pressure sintering of diamond by cobalt infiltration, High Temp.-High Pess., 1974, vol. 6, pp. 409–413.
5. Feenstra, R., Status of polycrystalline-diamond-compact bits: part 2 applications, J. Petrol. Technol., 1988, vol. 40, pp. 817–821.10.2118/17920-PA ↗
6. Borowiecka-Jamrozek, J., Engineering structure and properties of materials used as a matrix in diamond impregnated tools, Arch. Metall., 2013, vol. 58, pp. 5–8.10.2478/v10172-012-0142-0 ↗
7. Nath, C., Rahman, M., and Neo, K.S.,A study on ultrasonic elliptical vibration cutting of tungsten carbide, J. Mater. Process. Technol., 2009, vol. 209, pp. 4459–4464.10.1016/j.jmatprotec.2008.10.047 ↗
8. Butler-Smith, P.W., Axinte, D.A., Daine, M., Kennedy, A.R., Harper, L.T., Bucourt, J.F., and Ragueneau, R., A study of an improved cutting mechanism of composite materials using novel design of diamond micro-core drills, Int. J. Mach. Tool. Manu., 2015, vol. 88, pp. 175–183.10.1016/j.ijmachtools.2014.10.002 ↗
9. Jaworska, L., Szutkowska, M., Klimczyk, P., Sitarz, M., Bucko, M., Rutkowsk, P., Figiel, P., and Lojewska, J., Oxidation, graphitization and thermal resistance of PCD materials with the various bonding phases of up to 800°C, Int. J. Refract. Met. Hard Mater., 2014, vol. 45, pp. 109–116.10.1016/j.ijrmhm.2014.04.003 ↗
10. Šajgalík, M., Pilc, J., Borovsky, R., and Svitana, M., Simultaneous monitoring of dynamic processes in the cutting zone turning of superalloys by using thermovision and high-speed cutting, in Obrobka Skrawaniem Efektywne Wytwarzanie, Cichosz, P., Ed., Wroclaw, Poland: Wroclawska Drukarnia, Naukowa PAN Sp.z.o.o., 2012 (in polish).
11. Schneider, G., Jr., American Machinist. Chapter 1: Cutting Tool Materials, 13 Oct. 2009, Available at: [http://americanmachinist.com/cutting-tools/chapter-1-cutting-tool-materials].
12. Arsecularante, J.A., Zhang, L.C., and Montross, C., Wear and tool life of tungsten carbide, PCBN and PCD cutting tools, Int. J. Mach. Tool. Manuf., 2006, vol. 46, pp. 482–491.10.1016/j.ijmachtools.2005.07.015 ↗
13. Jaworska, L., Rozmus, M., Laszkiewicz-Lukasik, J., Wyzga, P., Podsiadlo, M., and Czechowski, K., Manufacturing of the cutting inserts using monolithic diamond compact, in Obrobka Skrawaniem Efektywne Wytwarzanie, Cichosz, P., Ed., Wroclaw, Poland: Wroclawska Drukarnia Naukowa PAN Sp.z.o.o., 2012 (in Polish).
14. Jaworska, L., Klimczyk, P., Szutkowska, M., Putyra, P., Sitarz, M., Cygan, S., and Rutkowski, P., Thermal resistance of PCD materials with borides bonding phase, J. Superhard Mater., 2015, vol. 37, no. 3, pp. 155–165.10.3103/S1063457615030028 ↗
15. Parker, W.J., Jenkins, R.J., Butler, C.P., and Abbott, G.L., Flash method of determining thermal diffusivity, heat capacity and thermal conductivity, J. Appl. Phys., 1961, vol. 32, no. 9, pp. 1679.10.1063/1.1728417 ↗
16. Cape, J.A. and Lehman, G.W., Temperature and finite pulse–time effects in the flash method for measuring thermal diffusivity, Ibid., 1963, vol. 34, no. 7, pp. 1909.
17. User’s Manual of Advantage v5.9 Machining Simulation Software, Minneapolis, MN, US, 2012.
18. Westraadt, J.E. and Dubrovinskaia, N., Thermally stable polycrystalline diamond sintered with calcium carbonate, Diamond Relat. Mater., 2007, vol. 16, no. 11, pp. 1929–1935.10.1016/j.diamond.2007.08.011 ↗
19. Shulzhenko, A.A. and Gargin, V.G., Properties and structure of diamond polycrystals obtained at different sintering temperatures, Superhard Mater., 1984, vol. 2, no. 2, pp. 26–30.
20. Klimenko, S.A., Mukovoz, Yu.A., and Polonsky, L.G., Cutting tools of superhard materials, Key. Eng. Mater., 1995, vol. 114, pp. 1–66.10.4028/www.scientific.net/KEM.114.1 ↗
21. Kidalov, S.V. and Shakhov, F.M., Thermal conductivity of diamond composites, Materials, 2009, vol. 2, no. 4, pp. 2467–2495.10.3390/ma2042467 ↗
22. Pierson, H.O., Handbook of refractory carbides and nitrides: properties, characteristics, processing and applications, NJ,USA: Noyes Publications, 1996.
23. Che-Haron, C.H. and Jawaid, A., The effect of machining on surface integrity of titanium alloy Ti–6% Al–4% V, J. Mater. Process. Technol., 2005, vol. 166, no. 2, pp. 188–192.10.1016/j.jmatprotec.2004.08.012 ↗