journal article·2022-01

Properties of Phases in Mo–Fe–B Alloys with a Boron Content up to 40 at % after Annealing at Subsolidus Temperatures

V. Z. Kubliy, S. V. Utkin, A. A. Bondar, S. Yu. Artiukh

Journal of Superhard Materials· Volume 44· Issue 1
Publisher page

Abstract

Abstract The concentration dependences of the lattice parameter and microhardness HV of phases in Mo–Fe–B alloys annealed at subsolidus temperatures with a boron content of up to 40 at % have been plotted. It has been established that when the content of iron in the (Mo), (αδ-Fe), σ-MoFe, and Mo2FeB2 phases grows, the lattice parameter become smaller, but the microhardness increases for the (Mo) and Mo2FeB2 phases and decreases for the (αδ-Fe), σ-MoFe, μ-Mo6Fe7, and R-Mo2Fe3 phases. The obtained results are in good agreement with the boundaries of phase homogeneity regions on the earlier constructed solidus surface for most of the studied phases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Advanced materials and composites · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Ide, T., Nakano, K., and Takagi, K., Sintering mechanisms and mechanical properties of Mo2FeB2 based hard alloys, J. Jpn. Soc. Powder Metall., 1987, vol. 34, no. 7, pp. 302–308.10.2497/jjspm.34.302 ↗
2. Ide, T., Nakano, K., and Takagi, K., Effects of Mo content on liquid phase sintering mechanisms of Mo2FeB2 base hard alloys, J. Jpn. Soc. Powder Metall., 1987, vol. 34, no. 8, pp. 337–343.10.2497/jjspm.34.337 ↗
3. Ide, T. and Ando, T., Reaction sintering of an Fe-6 wt pct B-48 wt pct Mo alloy in the presence of liquid phases, Metall. Mater. Trans. A, 1989, vol. 20, pp. 17–24.10.1007/BF02647490 ↗
4. Ide, K., Nakano, K., and Takagi, K., Sintering mechanisms of iron containing multiple boride base hard alloys, J. Jpn. Soc. Powder Metall., 1992, vol. 39, pp. 247–253.10.2497/jjspm.39.247 ↗
5. Takagi, K., Development and application of high strength ternary boride base cermets, J. Solid State Chem., 2006, vol. 179, pp. 2809–2818.10.1016/j.jssc.2006.01.023 ↗
6. Ren, X., Yua, L., Liu, Y., Li, H., Wu, J., and Liu, Zh., Effects of extra boron addition on the liquid-state sintering process and properties of hard Mo2FeB2-based cermets, Int. J. Refract. Met. Hard Mater., 2016, vol. 61, pp. 207–214.10.1016/j.ijrmhm.2016.09.015 ↗
7. Zhou, T., Nie, P., Lv, H., Chen, Q., and Cai, X., Assessment of elastic properties of coatings by three-point bending and nanoindentation, J. Coat. Technol. Res., 2011, vol. 8, no. 3, pp. 355–361.10.1007/s11998-010-9313-y ↗
8. Wang, Y. and Li, Z., Development of ternary-boride-based hard cladding material, Mater. Res. Bull., 2002, vol. 37, pp. 417–423.10.1016/S0025-5408(01)00824-8 ↗
9. Akiyama, S., Nakagawa, S., and Naoe, M., Electrically conductive layer of wear-resistant Fe–Mo–B alloys for protecting magnetic recording tape, IEEE Trans. Magn., 1991, vol. 27, no. 6, pp. 5094–5096.10.1109/20.278751 ↗
10. Efimov, Yu.V., Mukhin, G.G., Fridman, Z.G., Bouravleva, I.S., and Myasnikova, E.A., The change of the amorphous state of Fe–Mo–B alloys on heating, J. Non-Cryst. Solids, 1988, vol. 103, pp. 45–48.10.1016/0022-3093(88)90414-0 ↗
11. Wang, L., Zhang, B., Yi, G., OuYang, Y., and Hu, W., Structure and crystallization of amorphous Fe–Mo–B alloys obtained by electroless plating, J. Alloys Compd., 1997, vol. 255, nos. 1–2, pp. 231–235.10.1016/S0925-8388(96)02812-5 ↗
12. Jorgen, H. and Nielsen, V., Magnetic properties of Fe–Cr–B and Fe–Mo–B metallic glasses, J. Magn. Magn. Mater., 1980, vol. 19, nos. 1–3, pp. 138–140.10.1016/0304-8853(80)90574-0 ↗
13. Dunlap, R.A. and Stroink, G., Magnetic properties of amorphous Fe–Mo–B alloys, Can. J. Phys., 1984, vol. 62, pp. 714–719.10.1139/p84-097 ↗
14. Utkin, S.V., Bondar, A.A., Kublii, V.Z., Kapitanchuk, L.M., and Tikhonova, I.B., Solidus surface of the Mo–Fe–B system, Powder Metall. Met. Ceram., 2020, vol. 59, nos. 1–2, pp. 89–105.10.1007/s11106-020-00141-w ↗
15. Witusiewicz, V.T., Bondar, A.A., Hecht, U., Stryzhyboroda, O., Utkin, S.V., and Kublii, V.Z., Thermodynamic re-modeling of the ternary B–Fe–Mo system based on novel experimental data, J. Alloys Compd., 2021, vol. 854, art. ID 157173.10.1016/j.jallcom.2020.157173 ↗
16. Shi, Zh., Yin, H., Xu, Zh., Zhang, T., Yang, G., Zheng, Q., Rao, R.S., Yang, J., Gao, F., Wu, M., and Qu, X., Microscopic theory of hardness and optimized hardness model of MX1B and M2X2B2 (M = W, Mo; X1 = Fe, Co, X2 = Fe, Co, Ni) transition-metal ternary borides by the first-principles calculations and experimental verification, Intermetallics, 2019, vol. 114, art. ID 106573.10.1016/j.intermet.2019.106573 ↗
17. Subramanian, H., Okomoto, P.R., and Kasprzak, L., Binary Alloy Phase Diagrams, 3 vols., Massalski, T.V., Ed., Materials Park, OH: ASM Int., 1990, 2nd ed.
18. Witusiewicz, V.T., Bondar, A.A., Hecht, U., Potazhevska, O.A., and Velikanova, T.Ya., Thermodynamic modeling of the ternary B–Mo–Ti system with refined B–Mo description, J. Alloys Compd., 2016, vol. 655, pp. 336–352.10.1016/j.jallcom.2015.09.158 ↗
19. Rajkumar, V.B. and Hari Kumar, K.C. Thermodynamic modeling of the Fe–Mo system coupled with experiments and ab initio calculations, J. Alloys Compd., 2014, vol. 611, pp. 303–312.10.1016/j.jallcom.2014.05.030 ↗
20. Hansen, M. and Anderko, K., Constitution of Binary Alloys, New York: McGraw-Hill, 1958.10.1149/1.2428700 ↗
21. Villars, P. and Calvert, L.D., Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, 4 vols. Materials Park, OH: ASM Int., 1991, 2nd ed.
22. Rieger, W., Nowotny, H., and Benesovsky, F., Die Kristallstruktur von Mo2FeB2, Monatsh. Chem., 1964, vol. 95, pp. 1502–1503.10.1007/BF00901704 ↗
23. Gladyshevskii, E.I., Fedorov, T.F., Kuz’ma, Yu.B., and Skolozdra, R.V., Isothermal section of the molbdenum-iron-boron system, Sov. Powder Metall. Met. Ceram., 1966, vol. 5, no. 4, pp. 305–309.10.1007/BF00778631 ↗
24. Leithe-Jasper, A., Klesnar, H., Rogl, P., Komai, M., and Takagi, K.I., Reinvestigation of isothermal section in M(M = Mo,W)–Fe–B ternary systems at 1323 K, J. Jpn. Inst. Met., 2000, vol. 64, no. 2, pp. 154–162.10.2320/jinstmet1952.64.2_154 ↗
25. Kislyi, P.S., Bodnaruk, N.I., Borovikova, M.S., et al., Kermety (Cermets), Kiev: Naukova Dumka, 1985.
26. Kislyi, P.S., Neronov, V.A., Prikhna, T.A., and Bevza, Yu.V., Boridy alyuminiya (Aluminum Borides), Kiev: Naukova Dumka, 1990.
27. Mechnik, V.A., Bondarenko, N.A., Kolodnitskyi, V.M., Zakiev, V.I., Zakiev, I.M., Ignatovich, S.R., and Yutskevych, S.S., Mechanical and tribological properties of Fe–Cu–Ni–Sn materials with different amounts of CrB2 used as matrices for diamond-containing composites, J. Superhard Mater., 2020, vol. 42, no. 4, pp. 251–263.10.3103/S1063457620040061 ↗
28. Mechnik, V.A., Bondarenko, N.A., Kolodnitskyi, V.M., Zakiev, V.I., Zakiev, I.M., Ignatovich, S.R., Dub, S.N., and Kuzin, N.O., Formation of Fe–Cu–Ni–Sn–VN nanocrystalline matrix by vacuum hot pressing for diamond-containing composite. Mechanical and tribological properties, J. Superhard Mater., 2019, vol. 41, no. 6, pp. 388–401.10.3103/S1063457619060030 ↗