journal article·2025-10

Improving Drilling Technology in Percussive Rotary Drilling

Ye. A. Koroviaka, S. O. Shypunov

Journal of Superhard Materials· Volume 47· Issue 5
Publisher page

Abstract

Abstract A double-layer design has been developed for the cutting insert of drill tools by using the WC–Co hard alloy with different cobalt content and tungsten carbide grain size with a sharp boundary between zones of different granularity to increase the wear resistance and impact strength of tools and the rate of percussive rotary drilling in hard rocks up to 50%. The upper layer of the cutting insert is composed by a coarsely grained structure (6 µm), and the lower layer represents a finely grained structure (2 µm) with an increased fracture toughness. The results of this study can be used in mining, oil and gas, and building industries to improve drilling efficiency.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Drilling and Well Engineering · Tunneling and Rock Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Pavlychenko, A.V., Ihnatov, A.O., Koroviaka, Y.A., Ratov, B.T., and Zakenov, S.T., Problematics of the issues concerning development of energy-saving and environmentally efficient technologies of well construction, IOP Conf. Ser.: Earth Environ. Sci., 2022, vol. 1049, p. 012031.10.1088/1755-1315/1049/1/012031 ↗
2. Koroviaka, Ye.A., Ihnatov, A.O., Pavlychenko, A.V., Valouch, Karel, Rastsvietaiev, V.O., Matyash, O.V., Mekshun, M.R., and Shypunov, S.O., Studying the performance features of drilling rock destruction and technological tools, J. Superhard Mater., 2023, vol. 45, no. 6, pp. 466–476.10.3103/S1063457623060059 ↗
3. He, X., Reviewing the advancements in offshore drilling technologies in the USA and their global impact, World J. Adv. Res. Rev., 2023, vol. 21, no. 1, pp. 2242–2249.
4. Kim, T., Lee, H., and Park, J., Energy optimization in percussive drilling: A simulation approach, J. Drill. Sci. Technol., 2023, vol. 45, no. 3, pp. 267–276.
5. Ratov, B.T., Chudyk, I.I., Fedorov, B.V., Sudakov, A.K., and Borash, B.R., Results of production tests of an experimental diamond crown during exploratory drilling in Kazakhstan, SOCAR Proc., 2023, no. 2, pp. 25–31.
6. Teodoriu, C. and Bello, O., An outlook of drilling technologies and innovations: Present status and future trends, Energies, 2021, vol. 14, no. 15, p. 4499.10.3390/en14154499 ↗
7. Chen, C., Huang, B., Liu, Z., Li, Y., Zou, D., Liu, T., Chang, Y., and Chen, L., Additive manufacturing of WC–Co cemented carbides: Process, microstructure, and mechanical properties, Addit. Manuf., 2023, vol. 63, p. 103410.
8. Jiann, S. and David, W., Advanced percussive drilling technology for geothermal exploration and development DE-FOA-EE0005502, GRC Trans., 2017, vol. 41, pp. 100–125.
9. Li, Z. and Han, Y., The rock-breaking mechanism of rotary percussive cutting under high-frequency impact, Int. J. Rock Mech. Min. Sci., 2023, vol. 155, p. 104789.
10. Lao, K., Bruno, M., Diessl, J., Ramos, J., and Oliver, N., The use of advanced percussion drilling to improve subsurface permeability for enhanced geothermal systems, Transactions, 2019, vol. 43, pp. 58–75.
11. Ju, P. and Tian, D., Improving breaking efficiency of hard rock: Research on the mechanism of impact-shear rock breaking technology, Energy Explor. Exploit., 2025, vol. 43, no. 1, pp. 451–470.10.1177/01445987241273922 ↗
12. Kresse, T., Meinhard, D., Bernthaler, T., and Schneide, G., Hardness of WC–Co hard metals: Preparation, quantitative microstructure analysis, structure-property relationship and modelling, Int. J. Refract. Met. Hard Mater., 2018, vol. 75, pp. 287–293.10.1016/j.ijrmhm.2018.05.003 ↗
13. Powell, S., Rodgers, T., and Huang, L., Rate of penetration (ROP) optimization using percussion rotary drilling, Int. J. Drill. Eng., 2021, vol. 58, no. 3, pp. 245–259.
14. Ratov, B., Fedorov, B., Sudakov, A., Taibergenova, I., and Kozbakarova, S., Specific features of drilling mode with extendable working elements, E3S Web Conf., 2021, vol. 230, p. 1013.10.1051/e3sconf/202123001013 ↗
15. Davydenko, A.N., Kamyshatsky, A.F., and Sudakov, A.K., Innovative technology for preparing washing liquid in the course of drilling, Sci. Innov., 2015, vol. 11, no. 5, pp. 5–13.10.15407/scine11.05.005 ↗
16. Ihnatov, A.O., Koroviaka, Ye.A., Haddad, J., Tershak, B.A., Kaliuzhna, T.M., and Yavorska, V.V., Experimental and theoretical studies on the operating parameters of hydromechanical drilling, Nauk. Visn. Nats. Girnichogo Univ., 2022, vol. 1, pp. 20–27.10.33271/nvngu/2022-1/020 ↗
17. Ihnatov, A., Haddad, J.S., Koroviaka, Ye., Aziukovskyi, O., Rastsvietaiev, V., and Dmytruk, O., Study of rational regime and technological parameters of the hydromechanical drilling method, Arch. Min. Sci., 2023, vol. 68, no. 2, pp. 285–299.
18. Deng, T., Yang, Q., Huang, Y., Li, M., Chen, L., Tang, Y., Zhang, L., and Xu, G., Effect of Ni addition on the microstructure and mechanical properties of coarse-grained cemented carbides using the dissolution method with WO3 as the raw material, Ceram. Int., 2025, vol. 3, pp. 285–299.
19. Pashchenko, O., Ratov, B., Khomenko, V., Gusmanova, A., and Omirzakova, E., Methodology for optimizing drill bit performance, SGEM, 2024, vol. 2024, no. 1.1, pp. 623–631.10.5593/sgem2024/1.1/s06.78 ↗
20. Kang, H., Park, J.Y., Cho, J.W., Jang, J.S., Kim, K.W., and Lee, J.W., Optimal button arrangement of a percussion drill bit and its operating condition for improving drilling efficiency, Proc. Inst. Mech. Eng., Part C, 2018, vol. 232, no. 16, pp. 2887–2898.
21. Ratov, B.T., Mechnik, V.A., Gevorkyan, E.S., Bondarenko, N.A., Kolodnitskyi, V.M., Akhmetova, N.S., Korostyshevskyi, D.L., and Bayamirova, R.U., Investigating the wear resistance of Cdiamond–(WC–Co)–ZrO2 composite impregnated crowns in granite drilling, J. Superhard Mater., 2024, vol. 46, no. 4, pp. 314–321.10.3103/S1063457624040099 ↗
22. Ratov, B.T., Mechnik, V.A., Bondarenko, N.A., Kolodnitskyi, V.M., Gevorkyan, E.S., Nerubaskyi, V.P., Gusmanova, A.G., Fedorov, B.V., Kaldibaev, N.A., Arshidinova, M.T., and Kulych, V.G., Features structure of the Cdiamond–(WC–Co)–ZrO2 composite fracture surface as a result of impact loading, J. Superhard Mater., 2023, vol. 45, no. 5, pp. 348–359.10.3103/S1063457623050088 ↗
23. Abbas, R.K., A review on the wear of oil drill bits (conventional and the state of the art approaches for wear reduction and quantification), Eng. Failure Anal., 2018, vol. 90, pp. 554–584.10.1016/j.engfailanal.2018.03.026 ↗