Controlled Etching of Diamond via Carbothermal Reduction
Source abstract
Abstract
Abstract This study investigated the carbothermal reduction etching behavior of the Fe2O3–C system on diamond (100) and (111) crystal planes at 1000°C. The results indicate that Fe and FeO, generated from the reduction of Fe2O3 by carbon, serve as the primary active agents for etching. However, significant differences in the etching mechanisms were observed between the two crystal planes. On the (111) plane, step-preferred etching led to the formation of triangular pyramidal pits, with the extent of etching diminishing as the carbon content increased. In contrast, the (100) plane exhibited square-shaped etch pits, and higher carbon content promoted deeper etching. This research elucidates the regulatory mechanism of anisotropic etching and raw material composition on etch morphology, providing a theoretical foundation for controlled etching processing of diamond.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Diamond and Carbon-based Materials Research · Advanced Surface Polishing Techniques · Tunneling and Rock Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Upadhyay, K., Dasadia, A., and Moshcovitis, J., Estimation of nitrogen concentrations and related defects in single crystal diamonds for their technological grade applications, J. Superhard Mater., 2025, vol. 47, no. 2, pp. 107–113. https://doi.org/10.3103/S106345762502010810.3103/S1063457625020108 ↗
2. Perez, G., Maréchal, A., Chicot, G., Lefranc, P., Jeannin, P.-O., Eon, D., and Rouger, N., Diamond semiconductor performances in power electronics applications, Diamond Relat. Mater., 2020, vol. 110, p. 108154. https://doi.org/10.1016/j.diamond.2020.10815410.1016/j.diamond.2020.108154 ↗
3. Xiao, C., Zheng, H., Tang, L., Zhang, Q., and Zhu, Z., Effect of etching time on the surface morphology of diamond etched by Sc2O3 powder and the exploration of anisotropic etching mechanism, Diamond Relat. Mater., 2024, vol. 148, p. 111443.10.1016/j.diamond.2024.111443 ↗
4. Tsubouchi, N., Mokuno, Y., and Shikata, S., Characterizations of etch pits formed on single crystal diamond surface using oxygen/hydrogen plasma surface treatment, Diamond Relat. Mater., 2016, vol. 63, pp. 43–46. https://doi.org/10.1016/j.diamond.2015.08.01210.1016/j.diamond.2015.08.012 ↗
5. Ohashi, T., Sugimoto, W., and Takasu, Y., Self-embedment of small rectangular parallelepiped platinum particle array in etch pits on {100} planes of diamond crystallites, Bull. Chem. Soc. Jpn., 2011, vol. 84, no. 4, pp. 376–378. https://doi.org/10.1246/bcsj.2010033010.1246/bcsj.20100330 ↗
6. Ohashi, T., Sugimoto, W., and Takasu, Y., Catalytic etching of {100}-oriented diamond coating with Fe, Co, Ni, and Pt nanoparticles under hydrogen, Diamond Relat. Mater., 2011, vol. 20, no. 8. pp. 1165–1170. https://doi.org/10.1016/j.diamond.2011.06.02910.1016/j.diamond.2011.06.029 ↗
7. Chepurov, A., Sonin, V., Shcheglov, D., Latyshev, A., Filatov, E., and Yelisseyev, A., A highly porous surface of synthetic monocrystalline diamond: Effect of etching by Fe nanoparticles in hydrogen atmosphere, Int. J. Refract. Met. Hard Mater., 2018, vol. 76, pp. 12–15. https://doi.org/10.1016/j.ijrmhm.2018.05.01110.1016/j.ijrmhm.2018.05.011 ↗
8. Xiao, C.J., Dou, Z.Q., and Zhu, Z.D., Characterization and formation mechanism of surface morphology of diamond etched by iron oxide, Mater. Rep., 2020, vol. 34, no. 14, pp. 14045–14050. https://doi.org/10.11896/cldb.1907018010.11896/cldb.19070180 ↗
9. Wang, S., Chen, Q., and Li, J., Orientation degree characterization of diamond etched with Ce–7% Fe alloy, J. Rare Earths, 2012, vol. 30, no. 2, pp. 170–174. https://doi.org/10.1016/S1002-0721(12)60017-910.1016/S1002-0721(12)60017-9 ↗
10. Zenkin, S., Gaydaychuk, A., Okhotnikov, V., and Linnik, S., CVD diamond interaction with Fe at elevated temperatures, Materials, 2018, vol. 11, no. 12, p. 2505. https://doi.org/10.3390/ma1112250510.3390/ma11122505 ↗
11. Vlasova, M., Aguilar, P.A.M., Morelos, J.L.H., Parra, A.P., Tapia, R.G., and González, M.R., Obtaining electroheating elements based on products of carbothermal reduction of Fe2O3 by Waste Activated Sludge (WAS), Waste Biomass Valorization, 2022, vol. 14, no. 4, pp. 1319–1332. https://doi.org/10.1007/s12649-022-01905-810.1007/s12649-022-01905-8 ↗
12. Szabó, O., Vanko, G., Dragounová, A.K., Potocký, Š., and Kromka, A., Thermochemical etching of polycrystalline diamond films by nickel, Diamond Relat. Mater., 2025, vol. 154, p. 112164. https://doi.org/10.1016/j.diamond.2025.11216410.1016/j.diamond.2025.112164 ↗
13. Chen, X., Wang, X., and Fang, D., A review on C1s XPS-spectra for some kinds of carbon materials, Fullerenes, Nanotubes Carbon Nanostruct., 2020, vol. 28, pp. 1048–1058. https://doi.org/10.1080/1536383X.2020.179485110.1080/1536383X.2020.1794851 ↗