journal article·2023-09-02

Insight into mechanical properties and microstructure of concrete containing steel slag and ground-granulated blast-furnace slag

Shaofeng Zhang, Ditao Niu, Yan Wang, Wenqiang Tian, Daming Luo, Lu Zhang

Publisher page

Abstract

The impacts of steel slag (SS) and ground-granulated blast-furnace slag (GGBS) on the mechanical properties, hydration process, and microscopic characteristics of concrete were investigated in this study. The results show that substituting cement with SS has a negative impact on the strength; however, partial replacement of SS with GGBS could produce positive effect by facilitating the whole hydration of SS and cement. The improvement impact of GGBS on strength was small in early stages (3–28 days) and occurred mainly in the late stages (28–90 days). Meanwhile, the heat flow and cumulative hydration heat was decreased by the incorporation of SS and GGBS, in comparison to plain cement. The microscopic analysis results proved that replacing SS with GGBS could increase the whole hydration reaction degree, decrease the content of Ca(OH)2, enhance the compactness of the interfacial transition zone (ITZ), and refine the pore structure of concrete. Furthermore, a formula was established to estimate the splitting tensile strength according to compressive strength. The finding of this study provides valuable information on the practical application of the industrial wastes in concrete.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil Engineering, Xi’an University of Architecture and Technology, Xi’an, China

Shaanxi Railway Institute, Weinan, China

State Key Laboratory of Green Building in Western China, Xi’an University of Architecture and Technology, China Xi’an;

College of Materials Science and Engineering, Xi’an University of Architecture and Technology, Xi’an, China

Funding

National Natural Science Foundation of China · National Natural Science Fund for Excellent Young Scholars

References (64)

Show source-provided references
1. 10.1016/j.cemconres.2020.10628310.1016/j.cemconres.2020.106283 ↗
2. 10.1016/j.jmrt.2019.06.03810.1016/j.jmrt.2019.06.038 ↗
3. World Steel Association · 2018
4. 10.1016/j.jobe.2022.10412310.1016/j.jobe.2022.104123 ↗
5. 10.1016/j.cemconcomp.2021.10426210.1016/j.cemconcomp.2021.104262 ↗
6. 10.1016/j.powtec.2013.04.01610.1016/j.powtec.2013.04.016 ↗
7. 10.1016/j.conbuildmat.2011.10.06410.1016/j.conbuildmat.2011.10.064 ↗
8. 10.1016/j.jobe.2022.10431310.1016/j.jobe.2022.104313 ↗
9. Zhao J. · 2015
10. 10.1016/j.conbuildmat.2020.12114710.1016/j.conbuildmat.2020.121147 ↗
11. 10.1016/j.cemconres.2021.10669710.1016/j.cemconres.2021.106697 ↗
12. Zhang C · J Build Mater · 2021 · 24 · 710
13. 10.1016/j.conbuildmat.2019.11694810.1016/j.conbuildmat.2019.116948 ↗
14. 10.1016/j.cemconres.2019.10583310.1016/j.cemconres.2019.105833 ↗
15. 10.1016/j.eng.2021.07.02610.1016/j.eng.2021.07.026 ↗
16. 10.1016/j.cemconcomp.2021.10398210.1016/j.cemconcomp.2021.103982 ↗
17. 10.1016/j.cemconres.2020.10619310.1016/j.cemconres.2020.106193 ↗
18. 10.1016/j.cemconcomp.2012.05.00710.1016/j.cemconcomp.2012.05.007 ↗
19. 10.1016/j.jobe.2021.10390410.1016/j.jobe.2021.103904 ↗
20. 10.1016/j.cemconcomp.2021.10425810.1016/j.cemconcomp.2021.104258 ↗
21. 10.1016/j.resconrec.2018.04.02310.1016/j.resconrec.2018.04.023 ↗
22. He C. · 2020
23. GB/T 50081-2019, Standard for test method of mechanical properties on ordinary concrete. Beijing: Chinese Standard; 2019.
24. ASTM C39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, West Conshohocken, PA; 2014.
25. ASTM C496/C496M-11, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA; 2011.
26. 10.1016/j.powtec.2017.07.05210.1016/j.powtec.2017.07.052 ↗
27. 10.1016/j.powtec.2020.05.01510.1016/j.powtec.2020.05.015 ↗
28. 10.1016/j.conbuildmat.2018.05.14810.1016/j.conbuildmat.2018.05.148 ↗
29. 10.1016/j.conbuildmat.2013.06.04410.1016/j.conbuildmat.2013.06.044 ↗
30. 10.1016/j.powtec.2018.04.05410.1016/j.powtec.2018.04.054 ↗
31. 10.1016/j.conbuildmat.2019.04.14910.1016/j.conbuildmat.2019.04.149 ↗
32. Chinese Standard · 2010
33. ACI Committee 318.
34. 10.1016/j.cemconres.2018.03.01510.1016/j.cemconres.2018.03.015 ↗
35. 10.1016/j.conbuildmat.2019.11711510.1016/j.conbuildmat.2019.117115 ↗
36. 10.1016/j.jobe.2022.10405410.1016/j.jobe.2022.104054 ↗
37. Kansal CM · Proceedings · 2021 · 45 · 4520
38. Li Y. · 2003
39. 10.1016/j.cemconres.2011.03.02610.1016/j.cemconres.2011.03.026 ↗
40. 10.1016/j.cemconres.2010.09.01110.1016/j.cemconres.2010.09.011 ↗
41. 10.1016/j.conbuildmat.2018.10.08710.1016/j.conbuildmat.2018.10.087 ↗
42. 10.1016/j.conbuildmat.2017.05.08010.1016/j.conbuildmat.2017.05.080 ↗
43. 10.1016/j.conbuildmat.2020.11981410.1016/j.conbuildmat.2020.119814 ↗
44. 10.1016/j.cemconcomp.2021.10429210.1016/j.cemconcomp.2021.104292 ↗
45. 10.1016/j.jobe.2022.10422010.1016/j.jobe.2022.104220 ↗
46. 10.1016/j.conbuildmat.2020.11888210.1016/j.conbuildmat.2020.118882 ↗
47. 10.1016/j.conbuildmat.2019.11768310.1016/j.conbuildmat.2019.117683 ↗
48. 10.1016/j.cemconres.2019.05.00710.1016/j.cemconres.2019.05.007 ↗
49. 10.1016/j.conbuildmat.2020.12003210.1016/j.conbuildmat.2020.120032 ↗
50. 10.1016/j.conbuildmat.2013.10.01910.1016/j.conbuildmat.2013.10.019 ↗
51. Chen HS · J Build Mater · 2005 · 51
52. 10.1007/s11431-012-4830-910.1007/s11431-012-4830-9 ↗
53. Qiang W · J Thermal Anal Calorim · 2015
54. 10.1016/S0008-8846(99)00191-X10.1016/S0008-8846(99)00191-X ↗
55. 10.1016/j.cemconres.2010.02.01210.1016/j.cemconres.2010.02.012 ↗
56. 10.1016/j.conbuildmat.2017.04.20210.1016/j.conbuildmat.2017.04.202 ↗
57. 10.1016/j.cemconres.2011.06.00310.1016/j.cemconres.2011.06.003 ↗
58. Huang DG · Case Stud Constr Mater · 2022 · 16:e01003
59. Wenzhong Z · Wuhan Univ Technol Mater Sci Ed · 2013 · 5,721-725
60. 10.1016/j.conbuildmat.2021.12587810.1016/j.conbuildmat.2021.125878 ↗
61. 10.1016/j.cemconcomp.2017.05.00310.1016/j.cemconcomp.2017.05.003 ↗
62. 10.1016/j.cemconcomp.2020.10355510.1016/j.cemconcomp.2020.103555 ↗
63. Zhang W · J Chin Ceramic Soc · 2005 · 1 · 63
64. Song X, He C, Yang E, et al. Strength and Volume Stability of Chemico-Activated Steel Slag under Different Curing Conditions. T Mater Heat Treat.2020;5(41):140–147. (in Chinese)