Use of low-grade kaolinite clays in the production of limestone calcined clay cement
Source abstract
Abstract
The suitability of two different low-grade kaolinitic clays and limestone locally available in Switzerland to produce a limestone calcined-clay cement at industrial scale was investigated. Firstly, the clays characteristics related to reactivity were presented. Then, the effect of calcined clays on cement performance was explored according to EN 197-5 and EN 197-1 requirements. Finally, the new cement was produced at industrial scale by using a Swiss cement plant equipped with a Lepol kiln for clay calcination and clinker production and used to manufacture 3 different concretes mixes for 3 different environmental exposure classes (EN 206). The concrete mixes were tested for mechanical and durability performance. The results show that the two calcined low-grade clays are suitable to produce a limestone calcined-clay cement classified as CEM II/C-M (Q-LL). Moreover, all the 3 concretes manufactured with the new cement meet the minimum mechanical and durability standard requirements of the corresponding exposure classes.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Materials, Environmental Sciences and Urban Planning (SIMAU), INSTM Research Unit, Università Politecnica delle Marche, Ancona, Italy
Jura-Cement-Fabriken AG, Wildegg, Switzerland
Innovation Centre for Sustainable Construction (ICSC), CRH Nederland B.V, Amsterdam, The Netherlands
Institute of Materials Chemistry, TU Wien, Vienna, Austria
ISAC – CNR, Bologna, Italy
References (58)
Show source-provided references
1. 10.1617/s11527-022-01947-310.1617/s11527-022-01947-3 ↗
2. 10.1088/1757-899X/1091/1/01207510.1088/1757-899X/1091/1/012075 ↗
3. 10.1016/j.conbuildmat.2020.11886610.1016/j.conbuildmat.2020.118866 ↗
4. 10.1016/j.jclepro.2020.12453810.1016/j.jclepro.2020.124538 ↗
5. 10.1016/j.cemconcomp.2018.10.00810.1016/j.cemconcomp.2018.10.008 ↗
6. 10.1016/j.jclepro.2017.09.13310.1016/j.jclepro.2017.09.133 ↗
7. 10.1016/j.conbuildmat.2019.02.05410.1016/j.conbuildmat.2019.02.054 ↗
8. 10.1088/1757-899X/890/1/01208510.1088/1757-899X/890/1/012085 ↗
9. 10.1016/j.clema.2022.10009910.1016/j.clema.2022.100099 ↗
10. 10.1016/j.clay.2018.12.02110.1016/j.clay.2018.12.021 ↗
11. 10.1016/j.scitotenv.2023.16779410.1016/j.scitotenv.2023.167794 ↗
12. 10.1016/j.cemconcomp.2020.10387110.1016/j.cemconcomp.2020.103871 ↗
13. 10.1016/j.jclepro.2020.12451310.1016/j.jclepro.2020.124513 ↗
14. 10.1016/j.cscm.2020.e0044310.1016/j.cscm.2020.e00443 ↗
15. 10.1680/jgrma.18.0002910.1680/jgrma.18.00029 ↗
16. 10.1016/j.jobe.2023.10779410.1016/j.jobe.2023.107794 ↗
17. 10.1016/j.cemconres.2018.02.00510.1016/j.cemconres.2018.02.005 ↗
18. 10.3989/mc.2023.35512310.3989/mc.2023.355123 ↗
19. 10.1016/j.matpr.2023.04.49710.1016/j.matpr.2023.04.497 ↗
20. 10.1016/j.cemconcomp.2020.10386810.1016/j.cemconcomp.2020.103868 ↗
21. 10.1016/j.cemconres.2020.10630710.1016/j.cemconres.2020.106307 ↗
22. 10.1016/j.conbuildmat.2021.12615510.1016/j.conbuildmat.2021.126155 ↗
23. 10.1016/j.cemconres.2014.06.00710.1016/j.cemconres.2014.06.007 ↗
24. 10.1155/2016/721089110.1155/2016/7210891 ↗
25. 10.1016/j.conbuildmat.2022.12696310.1016/j.conbuildmat.2022.126963 ↗
26. 10.1016/j.clay.2014.09.00910.1016/j.clay.2014.09.009 ↗
27. 10.1016/j.cemconcomp.2010.01.00810.1016/j.cemconcomp.2010.01.008 ↗
28. 10.1016/j.clay.2021.10599010.1016/j.clay.2021.105990 ↗
29. 10.3390/ma1601037410.3390/ma16010374 ↗
30. 10.1016/j.conbuildmat.2021.12227110.1016/j.conbuildmat.2021.122271 ↗
31. 10.1016/j.cemconres.2021.10656410.1016/j.cemconres.2021.106564 ↗
32. 10.1016/j.matpr.2019.10.03710.1016/j.matpr.2019.10.037 ↗
33. 10.1617/s11527-010-9689-210.1617/s11527-010-9689-2 ↗
34. Yannick KWN, Kaluli JW, Mwangi BM, et al. Effect of thermal treatment on the pozzolanic activity of natural clay from selected Kenyan wetlands. Open Access J Sustain Res Eng. 2023;7(4):137–154.
35. 10.1016/j.cemconres.2016.02.01510.1016/j.cemconres.2016.02.015 ↗
36. 10.1016/j.cscm.2020.e0042410.1016/j.cscm.2020.e00424 ↗
37. 10.1021/acs.est.0c0413010.1021/acs.est.0c04130 ↗
38. 10.1016/j.conbuildmat.2021.12278910.1016/j.conbuildmat.2021.122789 ↗
39. 10.1016/j.envc.2020.10000610.1016/j.envc.2020.100006 ↗
40. 10.1016/j.compositesb.2021.10913710.1016/j.compositesb.2021.109137 ↗
41. 10.1016/j.clay.2019.10516810.1016/j.clay.2019.105168 ↗
42. 10.3390/ma1702031210.3390/ma17020312 ↗
43. 10.1016/j.jclepro.2023.13906510.1016/j.jclepro.2023.139065 ↗
44. 10.1111/j.1551-2916.2011.04925.x10.1111/j.1551-2916.2011.04925.x ↗
45. 10.1016/j.micromeso.2012.12.02910.1016/j.micromeso.2012.12.029 ↗
46. 10.1007/978-94-024-1207-9_4310.1007/978-94-024-1207-9_43 ↗
47. 10.1016/j.conbuildmat.2020.12106610.1016/j.conbuildmat.2020.121066 ↗
48. 10.1016/j.cemconres.2018.01.00910.1016/j.cemconres.2018.01.009 ↗
49. 10.3390/ma1501036710.3390/ma15010367 ↗
50. 10.1016/j.cemconcomp.2013.01.00210.1016/j.cemconcomp.2013.01.002 ↗
51. 10.1617/s11527-018-1269-x10.1617/s11527-018-1269-x ↗
52. 10.3390/ma1321473410.3390/ma13214734 ↗
53. 10.1155/2022/507263510.1155/2022/5072635 ↗
54. Badr M. S. H. Yuan S. Dong J. El-Shall H. Bermudez Y. A. Ortega D. C. … & Moudgil B. M. (2021). The properties of Kaolin from different locations and their impact on casting rate. KONA Powder and Particle Journal 38 251–259.10.14356/kona.2021002 ↗
55. Mazzucató E, Artiolí G, Gualtieri A, et al. High temperature dehydroxylation of muscovite-2M 1: a kinetic study by in situ XRPD. Physics and Chemistry of Minerals, 26, 375–381.; 1999.
56. 10.1016/j.cemconcomp.2020.10371010.1016/j.cemconcomp.2020.103710 ↗
57. 10.1016/j.conbuildmat.2014.04.06510.1016/j.conbuildmat.2014.04.065 ↗
58. 10.1016/j.clay.2013.12.01610.1016/j.clay.2013.12.016 ↗