Flexural properties of fiber reinforced geopolymer composites: experimental investigation and toughness evaluation
Source abstract
Abstract
This study examines the influence of different fiber types and contents on the flexural performance of geopolymer composites. A flexural toughness evaluation model was developed based on both energy and strength methods, incorporating unit deflection hardening flexural energy and the equivalent deflection hardening flexural strength ratio as toughness parameters. The results indicate that steel fiber-reinforced composites exhibit predominantly deflection-softening behavior, whereas polyethylene fiber-reinforced composites display deflection-hardening behavior. Steel fibers enhance the flexural properties primarily by improving the crack resistance of geopolymer composites. At a steel fiber content of 2.0%, the modulus of the rupture load reaches 0.943 kN. The polyethylene fibers improve the flexural performance mainly by enhancing the deformation capacity of the composite. At a polyethylene fiber content of 1.5%, the modulus of rupture deflection reaches 33.476 mm, the unit deflection hardening flexural energy reaches 132.927 kJ/m3, and the equivalent deflection hardening flexural strength ratio increases to 1.538.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
The National Key Laboratory of Water Disaster Prevention, Nanjing Hydraulic Research Institute
Southern Marine Science and Engineering Guangdong Laboratory (Guangzhou)
School of Water Conservancy and Transportation, Zhengzhou University
Funding
National Natural Science Foundation of China · PI Project of Southern Marine Science and Engineering Guangdong Laboratory
References (47)
Show source-provided references
1. 10.1016/j.cemconcomp.2023.10505710.1016/j.cemconcomp.2023.105057 ↗
2. 10.1016/j.compositesb.2022.11043910.1016/j.compositesb.2022.110439 ↗
3. 10.1007/s41062-024-01464-y10.1007/s41062-024-01464-y ↗
4. 10.1016/j.conbuildmat.2023.13153010.1016/j.conbuildmat.2023.131530 ↗
5. 10.1016/j.jclepro.2023.13784910.1016/j.jclepro.2023.137849 ↗
6. 10.47481/jscmt.149974910.47481/jscmt.1499749 ↗
7. 10.1007/s40996-021-00797-310.1007/s40996-021-00797-3 ↗
8. 10.1007/s13369-022-07230-510.1007/s13369-022-07230-5 ↗
9. 10.1016/j.tust.2024.10628010.1016/j.tust.2024.106280 ↗
10. 10.1016/j.cemconcomp.2021.10436810.1016/j.cemconcomp.2021.104368 ↗
11. 10.1016/j.tust.2017.05.01010.1016/j.tust.2017.05.010 ↗
12. 10.47481/jscmt.119747110.47481/jscmt.1197471 ↗
13. 10.1016/j.jclepro.2022.13067610.1016/j.jclepro.2022.130676 ↗
14. 10.1016/j.cemconcomp.2023.10505410.1016/j.cemconcomp.2023.105054 ↗
15. 10.47481/jscmt.160785110.47481/jscmt.1607851 ↗
16. 10.1016/j.conbuildmat.2017.07.13010.1016/j.conbuildmat.2017.07.130 ↗
17. 10.1016/j.conbuildmat.2023.13448510.1016/j.conbuildmat.2023.134485 ↗
18. 10.1016/j.tafmec.2022.10350310.1016/j.tafmec.2022.103503 ↗
19. 10.1016/j.compstruct.2020.11343310.1016/j.compstruct.2020.113433 ↗
20. 10.1016/j.conbuildmat.2023.13360610.1016/j.conbuildmat.2023.133606 ↗
21. 10.1016/j.cscm.2022.e0123110.1016/j.cscm.2022.e01231 ↗
22. 10.1016/j.jobe.2021.10246410.1016/j.jobe.2021.102464 ↗
23. 10.1617/s11527-022-02020-910.1617/s11527-022-02020-9 ↗
24. 10.1016/j.cscm.2022.e0157310.1016/j.cscm.2022.e01573 ↗
25. 10.1016/j.jobe.2024.11054910.1016/j.jobe.2024.110549 ↗
26. 10.1016/j.conbuildmat.2023.13268910.1016/j.conbuildmat.2023.132689 ↗
27. 10.1016/j.jobe.2023.10814410.1016/j.jobe.2023.108144 ↗
28. 10.1016/j.istruc.2023.03.12310.1016/j.istruc.2023.03.123 ↗
29. 10.1016/j.compstruct.2022.11583310.1016/j.compstruct.2022.115833 ↗
30. 10.1016/j.istruc.2024.10752510.1016/j.istruc.2024.107525 ↗
31. 10.1016/j.ceramint.2021.11.23210.1016/j.ceramint.2021.11.232 ↗
32. 10.1016/j.conbuildmat.2023.13048110.1016/j.conbuildmat.2023.130481 ↗
33. 10.1149/MA2020-02673420mtgabs10.1149/MA2020-02673420mtgabs ↗
34. GB/T 50081-2019. 2019. Standard for test methods of concrete physical and mechanical properties.
35. 10.1016/j.conbuildmat.2024.13525310.1016/j.conbuildmat.2024.135253 ↗
36. 10.1016/j.cemconcomp.2008.08.00210.1016/j.cemconcomp.2008.08.002 ↗
37. 10.1016/j.jobe.2023.10651610.1016/j.jobe.2023.106516 ↗
38. 10.1016/j.cemconcomp.2021.10407910.1016/j.cemconcomp.2021.104079 ↗
39. 10.1016/j.conbuildmat.2022.12709310.1016/j.conbuildmat.2022.127093 ↗
40. 10.1016/j.cemconres.2022.10707510.1016/j.cemconres.2022.107075 ↗
41. 10.1016/j.conbuildmat.2020.12186110.1016/j.conbuildmat.2020.121861 ↗
42. 10.1016/j.cemconcomp.2022.10441810.1016/j.cemconcomp.2022.104418 ↗
43. 10.1016/j.jobe.2021.10363810.1016/j.jobe.2021.103638 ↗
44. 10.1016/j.conbuildmat.2022.12739810.1016/j.conbuildmat.2022.127398 ↗
45. 10.1016/j.conbuildmat.2020.12143810.1016/j.conbuildmat.2020.121438 ↗
46. 10.1016/j.jobe.2024.10985510.1016/j.jobe.2024.109855 ↗
47. 10.1016/j.conbuildmat.2019.11744710.1016/j.conbuildmat.2019.117447 ↗