journal article·2020-07-01

Direct Tension Test for Characterization of Tensile Behavior of Ultra-High Performance Concrete

Zhidong Zhou, Pizhong Qiao

Journal of Testing and Evaluation· Volume 48· Issue 4
Publisher page

Abstract

Abstract Ultra-high performance concrete (UHPC) is characterized by its superior strength, ductility, durability, and particularly its unique post-cracking performance in tension. Dog-bone–shaped specimens are widely used for determination of the tensile behavior of UHPC, but there is no standard test method or specimen design for the characterization of tensile behavior. In this study, an evolving strategy on designing a direct tension test (DTT) specimen is first conducted using numerical finite element analysis. Seven series of DTT specimens made of UHPC and with well-designed dimensions to avoid local stress concentration are then tested experimentally. Results indicate that the post-cracking localization within the gauge measurement region is guaranteed, and the DTT specimen is capable of fully capturing tensile stress–strain responses of UHPC. An idealized constitutive model with three linear phases is proposed to fit the experimental data and thus characterize the linear elastic, strain-hardening, and strain-softening behavior of UHPC in tension. Four tensile material parameters extracted from the experimental stress–strain curves are implemented in the idealized constitutive model from which the multi-phase responses of UHPC in tension are reconstructed. It is found that most tensile material parameters extracted from experimental stress–strain curves, including tensile strength, modulus of elasticity, and dissipated energy, increase with the increased volume fraction of steel fibers, curing age, and displacement loading rate, while the strain capacity at the first cracking remains nearly constant. The DTT specimen developed can be used effectively to characterize the tensile behavior of ductile fiber-reinforced cementitious materials.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Civil and Environmental Engineering, Washington State University 1 , Spokane St., Pullman, WA 99164-2910 ,

Department of Civil and Environmental Engineering, Washington State University 2 , Sloan Hall 117, Pullman, WA 99164-2910 ,

References (44)

Show source-provided references
1. Utilization of Ultra-High Performance Fibre Concrete (UHPFC) for Rehabilitation - A Review10.1016/j.proeng.2013.03.048 ↗
2. A Review on Ultra High Performance Concrete: Part I. Raw Materials and Mixture Design10.1016/j.conbuildmat.2015.10.088 ↗
3. Graybeal, B. A., Structural Behavior of Ultra-high Performance Concrete Prestressed I-Girders, Report No. FHWA-HRT-06-115, U.S. Department of Transportation, McLean, VA, 2006, 104p.
4. Behavior of Driven Ultrahigh-Performance Concrete H-Piles Subjected to Vertical and Lateral Loadings10.1061/(ASCE)GT.1943-5606.0000350 ↗
5. 2013 · 814
6. Russell, H. G. and Graybeal, B. A., Ultra-high Performance Concrete: A State-of-the-Art Report for the Bridge Community, Report No. FHWA-HRT-13-060, U.S. Department of Transportation, McLean, VA, 2013, 171p.
7. Fracture Energy of UHP-FRC under Direct Tensile Loading
8. Strain-Hardening UHP-FRC with Low Fiber Contents10.1617/s11527-010-9650-4 ↗
9. Graybeal, B. A., Material Property Characterization of Ultra-high Performance Concrete, Report No. FHWA-HRT-06-103, U.S. Department of Transportation, McLean, VA, 2006, 186p.
10. ASTM C1609/C1609M-12 · 2012
11. ASTM C496/C496M-17 · 2017
12. Flexural/Tensile-Strength Ratio in Engineered Cementitious Composites10.1061/(ASCE)0899-1561(1994)6:4(513) ↗
13. Experimental and Numerical Evaluation of Direct Tension Test for Cylindrical Concrete Specimens10.1155/2014/156926 ↗
14. Characterization of Asphalt Mixtures Using Controlled-Strain Repeated Direct Tension Test10.1061/(ASCE)MT.1943-5533.0000586 ↗
15. Development of Direct Tension Test Method for Ultra-high-Performance Fiber-Reinforced Concrete
16. Influence of Fibre Orientation on the Tensile Behaviour of Ultra-high Performance Fibre Reinforced Cementitious Composites10.1016/j.cemconres.2017.03.007 ↗
17. Fracture Energy and Tension Properties of High-Strength Concrete10.1061/(ASCE)0899-1561(1995)7:2(108) ↗
18. High-Strength Concrete in Uniaxial Tension
19. ASTM B557M-15 · 2015
20. ASTM E8/E8M-16a · 2016
21. ASTM D638-14 · 2014
22. Properties of Strain Hardening Ultra High Performance Fiber Reinforced Concrete (UHP-FRC) under Direct Tensile Loading10.1016/j.cemconcomp.2013.12.015 ↗
23. Dynamic Impact Factors of Strain Hardening UHP-FRC under Direct Tensile Loading at Low Strain Rates10.1617/s11527-015-0581-y ↗
24. Fracture Energy of UHP-FRC under Direct Tensile Loading Applied at Low Strain Rates10.1016/j.compositesb.2015.05.031 ↗
25. Optimizing Ultra-high Performance Fiber Reinforced Concrete Mixtures with Twisted Fibers Exhibit Record Performance under Tensile Loading
26. ASTM C190-85 · 1990
27. Evaluation of Crack Opening Performance of a Repair Material with Strain Hardening Behavior10.1016/j.cemconcomp.2008.08.003 ↗
28. High Rate Response of Ultra-high-Performance Fiber-Reinforced Concretes under Direct Tension10.1016/j.cemconres.2014.12.008 ↗
29. Fracture Energy of Ultra-high-Performance Fiber-Reinforced Concrete at High Strain Rates10.1016/j.cemconres.2015.09.011 ↗
30. Size and Geometry Dependent Tensile Behavior of Ultra-high-Performance Fiber-Reinforced Concrete10.1016/j.compositesb.2013.10.072 ↗
31. Tensile Behavior of Ultra High Performance Hybrid Fiber Reinforced Concrete10.1016/j.cemconcomp.2011.09.009 ↗
32. Statistical Size Effect in Quasi-brittle Structures: I. Is Weibull Theory Applicable?10.1061/(ASCE)0733-9399(1991)117:11(2609) ↗
33. Rate-Dependent Tensile Behavior of High Performance Fiber Reinforced Cementitious Composites10.1617/s11527-008-9390-x ↗
34. Tensile Strain Hardening Behaviour of Hybrid Steel-Polyethylene Fibre Reinforced Cementitious Composites10.1016/j.conbuildmat.2008.01.009 ↗
35. Modeling the Shear Hysteretic Response for High Performance Fiber Reinforced Cementitious Composites10.1016/j.conbuildmat.2012.12.010 ↗
36. The Effect of Particle Size Distribution on Packing Density10.1002/cjce.5450460305 ↗
37. Self-Compacting Concrete: Theoretical and Experimental Study10.1016/j.cemconres.2005.06.002 ↗
38. Mix Design and Properties Assessment of Ultra-high Performance Fibre Reinforced Concrete (UHPFRC)10.1016/j.cemconres.2013.11.002 ↗
39. Pyo, S., “Characteristics of Ultra High Performance Concrete Subjected to Dynamic Loading,” Ph.D. thesis, University of Michigan, Ann Arbor, MI, 2014.
40. 2016 · 119
41. ASTM C469/C469M-14 · 2014
42. Strain Rate Dependent Properties of Ultra High Performance Fiber Reinforced Concrete (UHP-FRC) under Tension10.1016/j.cemconcomp.2014.10.002 ↗
44. Response of Ultra-high Performance Fiber Reinforced Concrete (UHPFRC) to Impact and Static Loading10.1016/j.cemconcomp.2008.09.001 ↗