Self-Healing of Dense Asphalt Concrete by Two Different Approaches: Electromagnetic Induction and Infrared Radiation
Source abstract
Abstract
Abstract Self-healing of cracks in asphalt mixtures is a phenomenon that can be accelerated by reducing the viscosity of bitumen as it increases the capillarity flow through the cracks. One method to achieve this is by increasing temperature, which also produces a thermal expansion that contributes to the circulation of the bitumen through cracks. In the present paper, the healing performance of asphalt mixture heated using infrared heating to simulate the natural solar radiation, and induction heating, a new method to increase the temperature of asphalt pavements, were compared in terms of time and healing temperature. Healing was defined as the relationship between the 3-point bending strength of an asphalt beam before and after healing. The results show that both methods reach similar and satisfactory healing ratios at around 90 %. However, induction heating is more energy efficient because the effect is concentrated on the binder, instead of heating the whole mix. This can be translated into much shorter heating times to reach the same healing level. Finally, an optimum radiation energy was found, after which higher amounts of infrared radiation damage the properties of the healed material.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Nottingham Transportation Engineering Centre [NTEC], Dept. of Civil Engineering, Univ. of Nottingham 1 , Nottingham NG7 2RD, GB
GITECO Research Group, Universidad de Cantabria. E.T.S. Ingenieros de Caminos 2 , Canales y Puertos de Santander, Av. de los Castros s/n, 39005Santander, ES
Nottingham Transportation Engineering Centre [NTEC], Dept. of Civil Engineering, Univ. of Nottingham 3 , Nottingham NG7 2RD, GB
References (22)
Show source-provided references
1. Read · 2003
2. Induction Healing of Dense Asphalt Concrete10.1016/j.conbuildmat.2013.07.105 ↗
3. Induction Healing of Fatigue Damage in Asphalt Test Samples10.1016/j.conbuildmat.2014.10.034 ↗
4. Single and Multiple Healing of Porous and Dense Asphalt Concrete10.1177/1045389X14529029 ↗
5. Investigation of Induction Healing Effects on Electrically Conductive Asphalt Mastic and Asphalt Concrete Beams Through Fracture-Healing Tests10.1016/j.conbuildmat.2013.08.089 ↗
6. The Healing Capability of Asphalt Pavements: A State of the Art Review10.1016/j.jclepro.2015.12.034 ↗
7. Two Ways of Closing Cracks on Asphalt Concrete Pavements: Microcapsules and Induction Heating
8. Uniformity and Mechanical Properties of Dense Asphalt Concrete With Steel Wool Fibres10.1016/j.conbuildmat.2013.01.030 ↗
9. Advanced Evaluation of Asphalt Mortar for Induction Healing Purposes10.1016/j.conbuildmat.2016.09.011 ↗
10. Induction Healing of Asphalt Mastic and Porous Asphalt Concrete10.1016/j.conbuildmat.2011.04.016 ↗
11. Self-Healing of Open Cracks in Asphalt Mastic10.1016/j.fuel.2011.09.009 ↗
12. A Simple Model to Define Induction Heating in Asphalt Mastic10.1016/j.conbuildmat.2011.12.046 ↗
13. Pauli, A. T. , “Chemomechanics of Damage Accumulation and Damage-Recovery Healing in Bituminous Asphalt Binders,” Ph.D. thesis, TU Delft, Delft, Netherlands, 2014.
14. Qiu, J. , “Self-Healing of Asphalt Mixtures, Towards a Better Understanding,” Ph.D. thesis, TU Delft, Delft, Netherlands, 2012.
15. Observation of Reversible Moisture Damage in Asphalt Mixtures10.1016/j.conbuildmat.2014.02.033 ↗
16. Induction Heating of Mastic Containing Conductive Fibers and Fillers10.1617/s11527-010-9644-2 ↗
17. Analysis of 30 Years of Pavement Temperatures Using the Enhanced Integrated Climate Model (EICM)
18. Effect of Air Voids Content on Asphalt Self-Healing via Induction and Infrared Heating10.1016/j.conbuildmat.2016.09.115 ↗
19. Hot Mix Asphalt Materials
20. Development of a Master Curve (E*) Database for Lime Modified Asphaltic Mixtures
21. Viscoelasticity and Near-Newtonian Behaviour of Concentrated Dispersions by Brownian Dynamics Simulations
22. Effects of Crystallinity and Crosslinking on the Thermal and Rheological Properties of Ethylene Vinyl Acetate Copolymer10.1016/j.polymer.2005.09.080 ↗