journal article·2012-12-01

Laboratory Test and Numerical Simulation of Bond Performance between Basalt Fiber Reinforced Polymer Rebar and Concrete

Xingyu Gu, Qiao Dong

Journal of Testing and Evaluation· Volume 40· Issue 7
Publisher page

Abstract

Abstract Because of its high strength and durability, basalt fiber reinforced polymer (BFRP) rebar is a promising alternative to the steel counterpart in reinforced concrete. Using BFRP rebar in continuously reinforced concrete pavement (CRCP) allows one to avoid the rusting of traditional steel bars caused by water that infiltrates through cracks. A sufficient bond between BFRP rebar and concrete is critical in order to apply BFRP rebar in CRCP. This paper investigates the effects of different ribs and anchorage lengths on the bond performance of BFRP rebar and concrete through a series of pull-out tests. The finite element method (FEM) is utilized to simulate the bond between BFRP rebar and concrete. The pull-out test results indicate that the bond strength changes with rib depth and rib spacing. The highest bond strength can be achieved when the rib depth is 10 % of the diameter of the BFRP rebar and the rib spacing is 80 % of the diameter. The bond strength of BFRP rebar with an anchorage length of 10 times the diameter is greater than that of BFRP rebar with an anchorage length of 5 times the diameter. The developed FEM models could provide the same bond-sliding relationship as the results of pull-out tests.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Dept. of Highway and Railway Engineering, Transportation College, Southeast Univ. 1 Ph.D., Associate Professor , , Nanjing, Jiangsu, CN, 210096

Dept. of Civil and Environmental Engineering, The Univ. of Tennessee 2 Ph.D., Postdoctoral Research Assistant , , Knoxville, TN37996, US

References (18)

Show source-provided references
1. American Association of State Highway and Transportation Officials (AASHTO) · 1993
2. Neff · 1986
3. Effects of GFRP Reinforcing Rebars on Shrinkage and Thermal Stresses in Concrete
4. Influence of Reinforcing Bars on Shrinkage Stresses in Concrete Slabs10.1061/(ASCE)0733-9399(2000)126:12(1297) ↗
5. Texas Department of Transportation · 2004
6. Analytical Investigation on New Continuous Reinforced Concrete Pavement (CRCP) Using GFRP Bars
7. Guide for the Design and Construction of Concrete Reinforced with FRP Bars
8. Behavior and Modeling of Bond of FRP Rods to Concrete10.1061/(ASCE)1090-0268(1997)1:2(40) ↗
9. Bond between Carbon Fiber Reinforced Polymer Bars and Concrete. I: Experimental Study10.1061/(ASCE)1090-0268(2003)7:2(154) ↗
10. Bond between Carbon Fiber Reinforced Polymer Bars and Concrete. II: Computational Modeling10.1061/(ASCE)1090-0268(2003)7:2(164) ↗
11. Bond Strength of Fiber Reinforced Polymer Rebars in Normal Strength Concrete10.1061/(ASCE)1090-0268(2005)9:3(203) ↗
12. GB 50152, 1992, “Standard Methods for Testing of Concrete Structures,” Ministry of Construction of the People’s Republic of China, Beijing, China.
13. ACI 440.1R, 2002, Guide for the Design and Construction of Structural Concrete Reinforced with FRP ReBars, Canadian Standards Association, Quebec, Canada.
14. Bond Stress-Slip Characteristics of FRP Rebars
15. Local Bond Stress-Slip Relationships of Deformed Bars under Generalized Excitations
16. Analytical Modeling of Bond between FRP Reinforcing Bars and Concrete
17. A Plastic-damage Model for Concrete10.1016/0020-7683(89)90050-4 ↗
18. Plastic-damage Model for Cyclic Loading of Concrete Structures10.1061/(ASCE)0733-9399(1998)124:8(892) ↗