journal article·2015-03-01

Mix Proportion Design and Mechanical Properties of Recycled PET Concrete

Zhanyong Yao, Xiaomeng Zhang, Zhi Ge, Zhuang Jin, Jie Han, Xianghong Pan

Journal of Testing and Evaluation· Volume 43· Issue 2
Publisher page

Abstract

Abstract The mix proportion and mechanical properties of polyethylene terephthalate (PET) concrete were studied by orthogonal test. PET concrete was produced by mixing melted PET with aggregate and mineral admixtures. The effects of several factors on the properties of PET concrete were investigated. These factors included: (1) coarse aggregate type, (2) mineral materials, (3) PET and mineral/aggregate (PETAM/AG) ratio, (4) sand ratio, (5) PET/mineral (PET/MA) ratio, and (6) maximum particle size of coarse aggregate. The results showed that the most important factor was PETAM/AG, followed by sand ratio and PET/MA. Samples with 10 mm coarse aggregate had the highest compressive strength of 36 MPa. The compressive strength decreased 8.6 and 37 % as the coarse aggregate maximum particle sizes changed from 10 to 4.75 and 13 mm, respectively. There was no significant difference in flexural strength when the sand ratio changed from 35 to 68 %. The strength of PET concrete with basalt was higher than that of concrete with limestone. The concrete containing fly ash and 5 % talc had the highest strength followed by concrete with fly ash, Portland cement (PC), fly ash with 5 % asphalt, without any mineral. The best mix proportion of PET concrete was PETAM/AG of 1:3, sand ratio of 35 % and PET/fly ash of 2:1.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Civil Engineering, Shandong Univ. 1 , 17922 Jingshi Road, Jinan250061, CN

School of Civil Engineering, Shandong Univ. 2 , 17922 Jingshi Road, Jinan250061, CN

China Railway Siyuan Survey and Design Group Co., Ltd. 3 , 745 Heping Dadao, Wuhan430063, CN

References (35)

Show source-provided references
1. Recycling of PET Bottles as Fine Aggregate in Concrete10.1016/j.wasman.2010.01.030 ↗
2. The Korea Institute of Resources Recycling
3. The Effect of Post-Consumer PET Particles on the Performance of Flexible Polyurethane Foams10.1016/j.polymertesting.2009.05.014 ↗
4. Effect of Interfacial Properties on the Crack Propagation in Cement Based Composites10.1016/S1065-7355(96)90078-4 ↗
5. Concrete Products With Waste's Plastic Material (Bottle, Glass, Plate)
6. Optimization on Proportion for Recycled Aggregate in Concrete Using Two-Stage Mixing Approach10.1016/j.conbuildmat.2006.05.040 ↗
7. Adhesion Characterization of Tungsten Mine Waste Geopolymeric Binder10.1016/j.conbuildmat.2006.10.005 ↗
8. Use of Recycled Plastic in Concrete: A Review10.1016/j.wasman.2007.09.011 ↗
9. Investigation on the Properties of Plastic Mortar
10. Precast Use of Polymer Concrete Using Unsaturated Polyester Resin Based on Recycled PET Waste10.1016/0950-0618(95)00088-7 ↗
11. Polymer Concrete Based on Recycled Polyethylene Terephthalate (PET)
12. Strength Characteristics of Polymer Mortar and Concrete Using Different Compositions of Resins Derived From Post-Consumer PET Bottles10.1016/j.conbuildmat.2009.08.006 ↗
13. Effect of Nucleating Agents on Crystallization, Mechanical and Rheological Behavior of Polyethylene Terephthalate
14. Effects of Modified Clay on the Crystallization Property of PET Clay Nanocomposites
15. Synthesis and Properties of PET-Clay Nano-Composite
16. Bentur · 1990
17. Shrinkage Cracking and Durability Characteristics of Polypropylene Fibre Reinforced Concrete
18. Pullout Behavior of Polypropylene Fibers From Cementitious Matrix10.1016/j.cemconres.2004.02.014 ↗
19. Degradation of Recycled PET Fibers in Portland Cement-Based Materials10.1016/j.cemconres.2004.10.040 ↗
20. Plastic Shrinkage Cracking in Concrete Materials: Influence of Fly Ash and Fibers
21. Material and Structural Performance Evaluation of Recycled PET Fiber Reinforced Concrete10.1016/j.cemconcomp.2009.11.002 ↗
22. Development of Recycled PET Fiber and its Application as Concrete-Reinforcing Fiber10.1016/j.cemconcomp.2007.02.002 ↗
23. Investigation of the Use of Waste Plastic as an Aggregate for Lightweight Concrete
24. Use of Waste Plastic in Concrete Mixture as Aggregate Replacement10.1016/j.wasman.2007.08.023 ↗
25. Effects of Waste PET Bottles Aggregate on the Properties of Concrete10.1016/j.cemconres.2004.05.014 ↗
26. Characteristics of Mortar and Concrete Containing Fine Aggregate Manufactured From Recycled Waste Polyethylene Terephthalate Bottles10.1016/j.conbuildmat.2009.02.036 ↗
27. An Investigation on the Use of Shredded Waste PET Bottles as Aggregate in Lightweight Concrete10.1016/j.wasman.2009.09.033 ↗
28. Influence of Content and Particle Size of Waste Pet Bottles on Concrete Behavior at Different w/c Ratios10.1016/j.wasman.2009.05.007 ↗
29. Use of Post-Consumer Waste Plastics in Cement-Based Composites10.1016/0008-8846(96)00135-4 ↗
30. Mechanical Test on Modified Concrete With Recycled Plastic Particles and its Numerical Simulation
31. Numerical Simulation on Micro-Level of Stress and Strength in Crumb Rubber Concrete
32. Reutilization of Plastic and Application of Recycled Plastic in Construction Materials
33. Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering
34. Test Methods of Cement and Concrete for Highway Engineering
35. Liu · 2006