journal article·2020-05-01

Study on Binder Film Thickness Distribution of Recycled Asphalt Pavements

Hengji Zhang, John T. Harvey, Liya Jiao, Hui Li, Mohamed Elkashef

Journal of Testing and Evaluation· Volume 48· Issue 3
Publisher page

Abstract

Abstract Binder film thickness (BFT) plays a vital role during the design of asphalt mixture and fine aggregate matrix because BFT can exert a significant effect on the performance of asphalt materials. However, the surface area factors are affected by the different specific gravities of the aggregates, which are always ignored during the calculation of BFT. Moreover, whether the BFT is uniformly distributed in asphalt mixture is controversial. Hence, it is necessary to further study the distribution of asphalt film thickness in asphalt materials and its influence factor. This study analyzed the distribution of BFT in coarse and fine parts of recycled asphalt pavements (RAPs). Firstly, a part of four types of RAP (Teichert, Syar, Vulcan coarse, and Vulcan fine) were sieved by #8 sieve (2.36 mm) to achieve coarse and fine parts of RAP. Secondly, the binder content and aggregate gradation were investigated through the ignition and extraction method. Thirdly, surface area ratio was used to evaluate the influence of the ignition and extraction method on the surface area of aggregate sieved from RAP. Finally, the BFT of different types of RAP were calculated through two different methods to evaluate the effect of specific gravities of the aggregates on BFT. The results indicate that for the coefficient of variation, 30 out of 32 data were less than 15.0 %, which implies the BFT was almost evenly distributed in coarse and fine parts of RAP. In addition, the difference of surface area factors caused by the different specific gravities of the aggregates exerts negligible influence on the surface area and the calculation of BFT.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Concrete and Cement Materials Research · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

The Key Laboratory of Road and Traffic Engineering, Ministry of Education, College of Transportation Engineering, Tongji University 1 , 4800 Caoan Rd., Shanghai 201804 ,

Department of Civil and Environmental Engineering, University of California Pavement Research Center, University of California, Davis 2 , 1 Shield Ave., Davis, CA 95616 ,

The Key Laboratory of Road and Traffic Engineering, Ministry of Education, College of Transportation Engineering, Tongji University 3 , 4800 Caoan Rd., Shanghai 201804 ,

References (31)

Show source-provided references
1. Comparative Evaluation of Hot-Mix Asphalt Design Methods10.1080/10298436.2011.565765 ↗
2. Investigation of In-Place Asphalt Film Thickness and Performance of Hot-Mix Asphalt Mixtures10.1061/(ASCE)0899-1561(2009)21:6(262) ↗
3. Minimum Voids in Mineral Aggregate in Hot-Mix Asphalt Based on Gradation and Volumetric Properties10.1177/0361198196154500110 ↗
4. History of Hot Mix Asphalt Mixture Design in the United States
5. Critical Review of Voids in Mineral Aggregate Requirements in Superpave10.3141/1609-03 ↗
6. Effect of Asphalt Film Thickness on Short- and Long-Term Aging of Asphalt Paving Mixtures10.1177/0361198196153500111 ↗
7. Validity of Asphalt Binder Film Thickness Concept in Hot-Mix Asphalt10.3141/2057-05 ↗
8. Performance Enhancement of Porous Asphalt Pavement Using Red Mud as Alternative Filler10.1016/j.conbuildmat.2017.11.105 ↗
9. Influence of Crumb Rubber and Tafpack Super on Performances of SBS Modified Porous Asphalt Mixtures10.1080/14680629.2019.1590223 ↗
10. Mixture Design of Fire-Retarded OGFC in Road Tunnel10.1080/14680629.2005.9690008 ↗
11. Characterization of OGFC Mixtures Containing Reclaimed Polyethylene Fibers10.1061/(ASCE)MT.1943-5533.0000162 ↗
12. Laboratorial Investigation on Effects of Microscopic Void Characteristics on Properties of Porous Asphalt Mixture10.1016/j.conbuildmat.2019.04.039 ↗
13. Evaluation of VMA and Film Thickness Requirements in Hot-Mix Asphalt10.5539/mas.v5n4p166 ↗
14. The Effect of Binder Film Thickness on Asphalt Cracking and Ravelling
15. Analytical Formulas for Film Thickness in Compacted Asphalt Mixture10.3141/1829-04 ↗
16. Effect of Asphalt Film Thickness on the Moisture Sensitivity Characteristics of Hot-Mix Asphalt10.1016/j.buildenv.2006.10.006 ↗
17. Optimum Filler–Bitumen Ratio of Asphalt Mortar Considering Self-Healing Property10.1061/(ASCE)MT.1943-5533.0002792 ↗
18. Utilization of Fine Solid Waste in Asphalt Mortar10.1520/jte20180636 ↗
19. Evaluation Indices of Asphalt-Filler Interaction Ability and the Filler Critical Volume Fraction Based on the Complex Modulus10.1080/14680629.2016.1218789 ↗
20. Evaluation of VMA and Other Volumetric Properties as Criteria for the Design and Acceptance of Superpave Mixtures
21. Effect of Volumetric Factors on the Mechanical Behavior of Asphalt Fine Aggregate Matrix and the Relationship to Asphalt Mixture Properties10.1016/j.conbuildmat.2013.08.045 ↗
22. Red Mud Addition in the Raw Meal for the Production of Portland Cement Clinker10.1016/j.jhazmat.2004.08.002 ↗
23. 2017
24. Evaluation of Anti-Icing Performance for Crumb Rubber and Diatomite Compound Modified Asphalt Mixture10.1016/j.conbuildmat.2016.01.003 ↗
25. Effects of Diatomite and SBS on Freeze-Thaw Resistance of Crumb Rubber Modified Asphalt Mixture10.1155/2017/7802035 ↗
26. 2013
27. 2014
28. 2013
29. 2014
30. 2012
31. 2011