journal article·2016-05-01

Evaluation of Coarse Aggregate in Cold Recycling Mixes Using X-Ray CT Scanner and Image Analysis

Lei Gao, Fujian Ni, Hailong Luo, Hainian Wang, Yunqing Chen

Journal of Testing and Evaluation· Volume 44· Issue 3
Publisher page

Abstract

Abstract The performance of cold recycling (CR) mixtures has been widely evaluated, but these studies rarely focused on the internal structure of CR mixtures. The objective of this research is to investigate the distribution, orientation, and shape properties of coarse aggregates in CR mixtures with emulsion by processing a series of sectional images from an X-ray CT scanner. The uniformity index (UI) was derived to describe the distribution of coarse aggregates. The aggregate orientation was obtained by calculating the average angle of inclination θ and the coherence of orientation Δ. The morphological indices, such as the flat and elongated ratio (FER), angularity index (AI), and surface texture index (STI) were used to address the shape properties of CR mixtures. According to the results, the distribution uniformity of CR aggregates becomes worse with coarser gradation. Compaction methods significantly influence the aggregate orientation in CR mixtures. The superpave gyratory compaction (SGC) method makes the best coherence of aggregate orientation, but the static load compacted specimen shows the opposite result. The CR mix tends to have worse uniformity of aggregate distribution, larger angle of aggregate inclination, and more random aggregate orientation compared with the HMA mix. It is estimated that more crushed faces of aggregates are produced in the process of pavement milling and the surface texture of RAP materials decreases with the long-term effects of traffic loading and environment. Adding new coarse aggregates to CR mixtures disturbs the aggregate distribution, but it can improve the average surface texture of aggregates in CR mixtures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Bauxite Residue and Utilization · Materials Engineering and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Transportation, Southeast Univ. 1 Ph.D. Student , , 2 Sipailou Road, Nanjing, 210096, CN

Road Maintenance Technology Engineering Center of Jiangsu Province, Southeast Univ. 2 Professor , , 2 Sipailou Road, Nanjing, 210096, CN

School of Transportation, Southeast Univ. 3 Master Student , , 2 Sipailou Road, Nanjing, 210096, CN

Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang'an Univ. South Erhuan Middle Section 4 , Xi'an, 710064, CN

School of Transportation, Southeast Univ. 5 Master Student , , 2 Sipailou Road, Nanjing, 210096, CN

References (28)

Show source-provided references
1. AASHTO-AGC-ARTBA Joint Committee, “Task Force 38,” Report on Cold Recycling of Asphalt Pavements, AASHTO, Washington D.C., 1988.
2. National Center for Asphalt Technology · 1997
3. Asphalt Recycling and Reclaiming Association · 2001
4. Assessment of Fracture Parameters to Predict Field Cracking Performance of Cold In-Place Recycling Mixtures10.3141/2155-04 ↗
5. Mixed-Mode Cracking Behavior of Cold Recycled Mixes With Emulsion Using Arcan Configuration10.1016/j.conbuildmat.2013.12.079 ↗
6. Investigation on the Bulk Performance and Microstructure of Emulsion-Based, Cold In-Place Recycling Mixture10.1520/JTE000344 ↗
7. Measurement of Aggregate Texture and its Influence on HMA Pavement Deformation
8. Microstructural Characterization of Asphalt Mixtures Containing Recycled Asphalt Materials10.1061/(ASCE)MT.1943-5533.0000544 ↗
9. Imaging Based Evaluation of Coarse Aggregate Size and Shape Properties Affecting Pavement Performance
10. Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
11. Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
12. Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
13. Standard Test Method for Index of Aggregate Particle Shape and Texture
14. Turner-Fairbank Highway Research Center · 1998
15. Aggregate Orientation and Segregation in Asphalt Concrete
16. Quantifying Laboratory Compaction Effects on the Internal Structure of Asphalt Concrete10.3141/1681-21 ↗
17. Internal Structure Characterization of Asphalt Concrete Using Image Analysis10.1061/(ASCE)0887-3801(1999)13:2(88) ↗
18. Implications of Experimental Measurements and Analyses of the Internal Structure of Hot-Mix Asphalt10.3141/1891-25 ↗
19. Three-Dimensional Digital Representation of Granular Material Microstructure From X-Ray Tomography Imaging10.1061/(ASCE)0887-3801(2004)18:1(28) ↗
20. Attempt at Quantifying the Degree of Compaction in HMA Using Image Analysis10.1061/40776(155)18 ↗
21. Coarse Aggregate Shape and Size Properties Using a New Image Analyzer10.1520/JTE12276J ↗
22. 2010
23. Characterization of Air Void Distribution in Asphalt Mixes Using X-ray Computed Tomography10.1061/(ASCE)0899-1561(2002)14:2(122) ↗
24. A Threshold Selection Method From Gray Level Histograms
25. X-Ray Computed Tomography and Nondestructive Evaluation of Clogging in Porous Concrete Field Samples10.1061/(ASCE)MT.1943-5533.0000484 ↗
26. A New Way to Study Homogeneity of HAM Based on Digital Image Disposal Technology
27. Fine-Aggregate Angularity: Automated Image Analysis Approach10.3141/1721-08 ↗
28. Determination of Coarse Aggregate Surface Texture Using Imaging Analysis