Fatigue Life Evaluation of an Annular Combustor Casing of a Gas Turbine Engine
Source abstract
Abstract
Abstract Structural analysis of annular combustors of aero gas turbines presents substantial challenges to engine-development establishments because of its multifunctional aspects such as complex geometry, thin wall structures, and stringent airworthiness requirements. This paper outlines an experimental methodology for fatigue life evaluation of an annular combustor casing using a closed-loop hydraulic test facility and presents results corresponding to the initial configuration. Premature fatigue failure has revealed that a design feature with a high stress concentration on the combustor casing needs to be modified. Iterative studies are taken up to overcome the design deficiency. This paper presents a unique approach whereby the experimental results for a full-scale annular combustor are correlated with numerical predictions for ensuring structural integrity in accordance with military airworthiness standards.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Turbomachinery Performance and Optimization · Mechanical Failure Analysis and Simulation · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Gas Turbine Research Establishment 1 , Bangalore, 560093, IN .
Mechanical Engineering Dept., Defence Institute of Advanced Technology, Deemed Univ. 2 Associate Professor and Head , , Pune, 411025, IN
References (27)
Show source-provided references
1. Explosion of a Combustion Chamber Shell10.1016/S1350-6307(99)00008-4 ↗
2. Lifing Methods and Safety Criteria in Aero Gas Turbines10.1016/j.engfailanal.2005.08.010 ↗
3. Cohen · 1996
4. Inco Alloys International · 1985
5. Thermo-Mechanical Fatigue and Fracture of INCO 71810.1016/j.ijfatigue.2007.01.041 ↗
6. Experimental Procedure for the Mechanical Evaluation of Oxide-Carbon Refractories by Strain Measurement10.1520/JTE103455 ↗
7. Development of a Novel Test Rig for the Evaluation of Aircraft Fuel Tank Sealant10.1520/JTE103420 ↗
8. Design and Simulation of a Novel Multiaxial Fatigue Test Rig10.1007/s11340-011-9510-3 ↗
9. Development of a Closed Loop High Cycle Resonant Fatigue Testing System10.1007/s11340-011-9486-z ↗
10. General Specification for Engines, Aircraft, Turbojets, and Turbofans
11. Wilkinson, C. and Gostelow, C. R., “High Temperature Cyclic Behavior of Aerospace Materials: Room Temperature Validation Tests of Ti-6 Al-4V,” Advisory Report No. 328, Advisory Group for Aerospace Research and Development (AGARD), Neuilly sur Seine, France, 1994.
12. Effect of Fatigue on Proof Strength of a Gas Turbine Combustor Casing10.1007/s11668-012-9644-3 ↗
13. Structural Design Analysis of Aero-engine Components for Qualification and Development of Allied Technologies
14. Standard Test Methods for Tension Testing of Metallic Materials
15. Petley, V. and Chandru, F., “Tensile Test of Inconel 718 Sheet Specimens,” GTRE Internal Report No. GTRE/SIMA/MG/MTL/2010/02-001, Gas Turbine Research Establishment, Bangalore, India, 2010.
16. Assessing the Fatigue Life of Butt-Welded Joints Under Oblique Loading by Using Local Approaches10.1016/j.ijfatigue.2007.05.011 ↗
17. Multiaxial Fatigue of Welded Joints Under In-Phase and Out of Phase Local Strains and Stresses10.1016/0142-1123(95)93051-3 ↗
18. Fatigue Damage Assessment of Various Welded Joints Under Uniaxial Loading Based on Energy Methods10.1016/j.ijfatigue.2010.09.019 ↗
19. A New Version of the Neuber Rule Accounting for the Influence of the Notch Opening Angle for Out-of-Plane Shear Loads10.1016/j.ijsolstr.2009.01.003 ↗
20. Further Investigation of Neuber’s Rule and the Equivalent Strain Energy Density (ESED) Method10.1016/j.ijfatigue.2003.10.002 ↗
21. Using the Neuber Plot to Account for the Effects of Scatter, Corrosion and Welding in Strain-life Fatigue Test Data
22. An Apparatus for the Study of Effects of Cyclic Thermal Stresses on Ductile Metals
23. Manson · 1954
24. The Application of Some Approximate Solutions of Stress and Strain Concentration for Life Estimation in the Low Cycle Fatigue Region
25. On Thermal Stress and Fatigue Life Evaluation in Work Rolls of Hot Rolling Mill10.1177/0309324712445120 ↗
26. Manson · 196610.1115/1.3625225 ↗
27. Manson · 200910.31399/asm.tb.fdmht.9781627083430 ↗