journal article·2017-07-01

On the Evaluation of the Effect of Microstructure on the SNR of Ultrasonic Images and on the Velocity of Lcr Waves

P. Pereira, A. A. Buenos, A. A. Santos

Journal of Testing and Evaluation· Volume 45· Issue 4
Publisher page

Abstract

Abstract Stress measurement using ultrasound employs the acoustoelastic theory that relates the variation of the velocity of elastic waves to the variation of stress in the material. However, not only stress has influence on wave velocity, but also the microstructure of the specimen being evaluated. The aim of this work is to verify the feasibility of using ultrasonic images to evaluate microstructural variations that affect the velocity of longitudinal critically refracted (Lcr) waves used in stress measurements. The images were generated applying the total focusing method (TFM) in signals obtained with an ultrasonic array. The signals recorded contain grain noise related to the material's microstructure. In this work, the time-of-flight (TOF) of Lcr waves and the signal-to-noise ratio (SNR) of ultrasonic images are obtained for samples of ASTM A36 steel with different grain sizes and shapes. The TOF is related to the wave velocity and the SNR to the grain noise intensity. The influence of stresses on the TOF and SNR was also verified. A linear relation between TOF and SNR was established with a variation rate of −76 ns/dB. No significant variations were observed in the SNR caused by the applied stress. Because the noise intensity of the images are sensitive only to microstructural variations, the technique presented has potential to be used to correct values of ultrasonic wave velocity in stress measurements.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Ultrasonics and Acoustic Wave Propagation · Thermography and Photoacoustic Techniques · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Univ. of Campinas (UNICAMP) 1 Faculty of Mechanical Engineering , , Rua Mendeleyev, 200, Cidade Universitária “Zeferino Vaz” Barão Geraldo, CEP 13083-860, Campinas, SP, BR

Dept. of Mechanical Engineering, Federal Univ. of Santa Maria 2 , Av. Roraima, 1000, Campus, Prédio 7, Sala 312, Cidade Universitária, Bairro Camobi, CEP 97105-900, Santa Maria, RS, BR

Faculty of Mechanical Engineering, Univ. of Campinas (UNICAMP) 3 , Rua Mendeleyev, 200, Cidade Universitária “Zeferino Vaz” Barão Geraldo, CEP 13083-860, Campinas, SP, BR

References (25)

Show source-provided references
1. Evaluation of the Penetration Depth of Lcr Waves for Stress Measurement
2. Measurement of Acoustoelastic and Third-Order Elastic Constants for Rail Steel10.1121/1.381146 ↗
3. Comparison Between Contact and Immersion Method in Ultrasonic Stress Measurement of Welded Stainless Steel Plates10.1520/JTE20120267 ↗
4. Using Ultrasonic Waves and Finite Element Method to Evaluate Through-Thickness Residual Stresses Distribution in the Friction Stir Welding of Aluminum Plates10.1016/j.matdes.2013.06.032 ↗
5. Ultrasonic Stress Evaluation Through Thickness of a Stainless Steel Pressure Vessel10.1016/j.ijpvp.2014.08.006 ↗
6. Stress Evaluation of Railroad Forged Wheels by Ultrasonic Testing
7. Ultrasonic Evaluation of Residual Hoop Stress in Forged and Cast Railroads Wheels—Differences10.1007/s10921-014-0275-3 ↗
8. Temperature Effect on the Measurement of Stresses in Pipelines Using Ultrasonic Lcr Waves
9. Temperature Effect on the Propagation of Critically Refracted Longitudinal Waves (Lcr) for Stress
10. Influence of Grain Size on the Propagation of LCR Waves in Low Carbon Steel10.1007/s10921-014-0252-x ↗
11. Effect of Grain Size on the Ultrasonic Parameters in Stainless Steels
12. Comprehensive Microstructural Characterization in Modified 9Cr-1Mo Ferritic Steel by Ultrasonic Measurements10.1007/s11661-002-0171-9 ↗
13. Microstructure Effect on the Lcr Elastic Wave for Welding Residual Stress Measurement10.1007/s11340-009-9283-0 ↗
14. Characterization of Microstructure by Backscattered Ultrasonic Waves10.1179/msc.1981.15.11-12.549 ↗
15. A Model Relating Ultrasonic Scattering Measurements Through Liquid–Solid Interfaces to Unbounded Medium Scattering Amplitudes10.1121/1.390045 ↗
16. Ultrasonic Backscattering Measurements of Grain Size in Metal Alloys
17. Effect of Texture and Grain Shape on Ultrasonic Backscattering in Polycrystals10.1016/j.ultras.2014.02.020 ↗
18. Relation Between Ultrasonic Scattering and Microstructure of Polycrystalline Materials
19. The Post-Processing of Ultrasonic Array Data Using the Total Focusing Method10.1784/insi.46.11.677.52285 ↗
20. Post-Processing of the Full Matrix of Ultrasonic Transmit–Receive Array Data for Non-Destructive Evaluation10.1016/j.ndteint.2005.04.002 ↗
21. Comparison Between Experimental and 2-D Numerical Studies of Multiple Scattering in Inconel600 by Means of Array Probes10.1016/j.ultras.2013.06.012 ↗
22. Advanced Reflector Characterization With Ultrasonic Phased Arrays in NDE Applications10.1109/TUFFC.2007.424 ↗
23. Application of Acoustoelasticity to Evaluate Stress Relaxation in API 5L X70 Steel for Pipelines
24. 2013
25. Ultrasonic Velocity Measurements for Estimation of Grain Size in Austenitic Stainless Steel10.1016/0963-8695(95)00011-L ↗