Fracture-Toughness Evaluation in Submerged Arc-Welding Seam Welds in Nonstandard Curved SE(B) Specimens in the Short Radial Direction of API 5L Steel Pipe
Source abstract
Abstract
Abstract Plane-strain fracture toughness of submerged arc-welding seams of an API 5L steel pipe in the short radial direction was evaluated using nonstandard curved SE(B) test specimens. These specimens are directly cut from the pipe and require no machining other than the crack starter notch. The stress intensity factor function for the nonstandard curved SE(B) specimen was calibrated for three-point bending loading. The initiating notch was aligned to make the crack propagate through the weld-deposited metal zone. The measured fracture-toughness value was 56.3 ± 2.9 Mpa√m. A fractographic study of the tested specimens showed that the deposited metal fracture consists of a mixture of ductile tearing and cleavage that corresponds to the ferrite and the dendritic grains, respectively. The dendritic grains behave in a brittle way, thus being the main contributions to the relatively low fracture-toughness values obtained from the tests.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Fatigue and fracture mechanics · Material Properties and Failure Mechanisms · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
I.P.N.-E.S.I.Q.I.E., Dept. Ing. Metalúrgica y Materiales 1 , Zacatenco07738, MX
References (12)
Show source-provided references
1. McAllister · 2009 · 56
2. Kou · 2003
3. Four · 1972
4. Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIC of Metallic Materials
5. Efecto del Tamaño de Probeta y Orientación en la Resistencia a la Tracción y a la Tenacidad a la Fractura
6. Compliance Experimental Determination in Nonstandard SEN Samples in API 5L Steel Pipe in the Short Radial Direction
7. Standard Test Method for Measurement of Fatigue Crack Growth Rates
8. Fatigue Crack Propagation in SAW Seam Welds of API 5L X42 Steel Pipe in the Radial Short Direction10.1520/JAI102551 ↗
9. Standard Test Methods for Tension Testing of Metallic Materials
10. 1973
11. Broek · 1986 · 8
12. Anderson · 2005 · 4510.1201/9781420058215 ↗