journal article·2019-03-01

Foam Injection Molding of Polypropylene/Zinc Oxide Nanocomposite with Chemical Foaming Agent: Mechanical Properties and Morphology

Mirigul Altan, Tim Osswald

Journal of Testing and Evaluation· Volume 47· Issue 2
Publisher page

Abstract

Abstract Polyropylene (PP)- zinc oxide (ZnO) nanocomposites were obtained by a melt mixing process. Organo silane–modified ZnO and untreated ZnO, and compositions with added stearic acid were prepared in a twin screw extruder. Thermal properties of the composites were determined by differential scanning calorimetry. The obtained composites were foamed by conventional injection molding using the chemical foaming agent azodicarbonamide. The effects of the ZnO addition and the coupling agent on cell morphology, tensile strength, and weight reduction were investiagted. The silane-treated ZnO was effective in cell generation; however, this decreased the tensile strength of the composite foams. On the other hand, untreated ZnO induced a slight increment in tensile strength that was due to lower cell generation. When weight reduction and improvement in tensile strength were considered togehther, the addition of 3 wt. % of untreated ZnO was found to be successful for PP foaming.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Foaming and Composites · Epoxy Resin Curing Processes · Polymer composites and self-healing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering, Yildiz Technical University 1 , Besiktas, Istanbul 34349 ,

Department of Mechanical Engineering, 1513 University Ave., Madison University of Wisconsin–Madison 2 , Madison, WI 53706 ,

References (44)

Show source-provided references
1. Current Trends in Nanocomposite Foams10.1177/0021955X08097707 ↗
2. Polymer Nanocomposite Foams10.1016/j.compscitech.2005.06.016 ↗
3. Characterization of Thermoplastic Polyurethane/Polylactic Acid (TPU/PLA) Tissue Engineering Scaffolds Fabricated by Microcellular Injection Molding10.1016/j.msec.2013.07.037 ↗
4. Nanosilica Addition Dramatically Improves the Cell Morphology and Expansion Ratio of Polypropylene Heterophasic Copolymer Foams Blown in Continuous Extrusion10.1021/ie102438p ↗
5. Extrusion of Linear Polypropylene-Clay Nanocomposite Foams10.1002/pen.21961 ↗
6. Fundamentals of Foam Formation
7. Non-Isothermal Decomposition Kintetics of Azodicarbonamide in High Density Polyethylene Using Capillary Rheometer10.1016/j.polymertesting.2008.05.004 ↗
8. Influences of Particle Sizes and Contents of Chemical Blowing Agents on Foaming Wood Plastic Composites Prepared from Poly(Vinyl Chloride) and Rice Hull10.1016/j.matdes.2010.12.044 ↗
9. Effect of Chemical and Physical Foaming Additives on the Properties of PP/Wood Flour Composites10.1016/j.polymertesting.2013.02.009 ↗
10. Study of Microcellular Injection-Molded Polypropylene/Waste Ground Rubber Tire Powder Blend10.1016/j.matdes.2009.07.002 ↗
11. Effect of Additives on Flexible PVC Foam Formation10.1016/j.jmatprotec.2007.04.123 ↗
12. Microcellular Injection-Molding of Polylactide with Chain-Extender10.1016/j.msec.2008.10.027 ↗
13. Fabrication of Super Ductile Polymeric Blends Using Microcellular Injection Molding10.1016/j.mfglet.2014.02.002 ↗
14. A Novel Method of Producing Lightweight Microcellular Injection Molded Parts with Improved Ductility and Toughness10.1016/j.polymer.2014.09.066 ↗
15. Polyethylene Ionomer-Based Nano-Composite Foams Prepared by a Batch Process and MuCell Injection Molding10.1016/j.msec.2009.08.009 ↗
16. 2012 · 427
17. Reduced Fibre Breakage in a Glass-Fibre Reinforced Thermoplastic through Foaming10.1016/j.compscitech.2005.04.050 ↗
18. Biaxial Flow-Induced Alignment of Silicate Layers in Polypropylene/Clay Nanocomposite Foam10.1021/nl010051 ↗
19. Improved Through-Plane Electrical Conductivity in a Carbon-Filled Thermoplastic via Foaming10.1002/pen.21001 ↗
20. Influence of Nanoparticle Surface Chemistry and Size on Supercritical Carbon Dioxide Processed Nanocomposite Foam Morphology10.1016/j.supflu.2009.09.007 ↗
21. Effects of Clay Dispersion on the Foam Morphology of LDPE/Clay Nanocomposites10.1002/app.24908 ↗
22. An Experimental and Theoretical Investigation of the Compressive Properties of Multi-Walled Carbon Nanotube/Poly(Methyl Methacrylate) Nanocomposite Foams10.1016/j.polymer.2011.04.050 ↗
23. Enhancement in Thermal and Mechanical Properties of Polyurethane Foam Infused with Nanoparticles10.1016/j.msea.2007.06.060 ↗
24. Synthesis of Polystyrene–Carbon Nanofibers Nanocomposites Foams10.1016/j.polymer.2005.04.010 ↗
25. Evaluating the Foamability of Polypropylene with Nitrogen as the Blowing Agent10.1016/j.polymertesting.2011.08.014 ↗
26. The Characterization of Rheological Properties of Melt Grafting Polypropylene for Foaming10.1007/s00289-009-0069-4 ↗
27. Bubble Growth in the Microcellular Foaming of CO2/Polypropylene Solutions10.1002/app.30648 ↗
28. Effect of Clay and Compatibilizer on the Mechanical/Thermal Properties of Microcellular Injection Molded Low Density Polyethylene Nanocomposites10.1016/j.icheatmasstransfer.2009.02.005 ↗
29. Effect of Organoclay on the Mechanical/Thermal Properties of Microcellular Injection Molded Polystyrene–Clay Nanocomposites10.1016/j.icheatmasstransfer.2009.06.011 ↗
30. Processing and Characterization of Solid and Microcellular PHBV/PBAT Blend and Its RWF/Nanoclay Composites10.1016/j.compositesa.2010.04.002 ↗
31. Effects of Silica Particle Size on the Structure and Properties of Polypropylene/Silica Composites Foam10.1016/j.jiec.2012.12.043 ↗
32. Influence of Foaming Process on the Structure–Properties Relationship of Foamed LDPE/Silica Nanocomposites10.1016/j.compositesb.2012.10.045 ↗
33. Nanodispersions of Carbon Nanofiber for Polyurethane Foaming10.1016/j.polymer.2010.05.017 ↗
34. Nanocomposite Foams of Polypropylene and Carbon Nanotubes: Preparation, Characterization, and Evaluation of their Performance as EMI Absorbers10.1002/macp.201500031 ↗
35. Novel Carbon Nanotube-Polystyrene Foam Composites for Electromagnetic Interference Shielding10.1021/nl051375r ↗
36. Sub-Critical Gas-Assisted Processing Using CO2 Foaming to Enhance the Exfoliation of Graphene in Polypropylene + Graphene Nanocomposites10.1016/j.polymer.2017.04.028 ↗
37. Moulded Polypropylene Foams Produced Using Chemical or Physical Blowing Agents: Structure–Properties Relationship10.1007/s10853-012-6357-7 ↗
38. Study on the Molding Characteristics and Mechanical Properties of Injection-Molded Foaming Polypropylene Parts10.1177/0731684404031891 ↗
39. Effects of Compatibilizers on Mechanical and Antibacterial Properties of Injection Molded Nano-ZnO Filled Polypropylene10.1177/0021998312436999 ↗
40. Electrical, Morphological, Thermal and Mechanical Properties of Low Density Polyethylene/Zinc Oxide Nanocomposites Prepared by Melt Mixing Method
41. Optical and Thermo Electrical Properties of ZnO Nano Particle Filled Polystyrene10.1002/app.32422 ↗
42. Electrical Properties of Low-Density Polyethylene/Multiwalled Carbon Nanotube Nanocomposites10.1016/j.matchemphys.2005.12.021 ↗
43. Effect of Crystallite Size of Zinc Oxide on the Mechanical, Thermal and Flow Properties of Polypropylene/Zinc Oxide Nanocomposites10.1016/j.compositesb.2013.08.010 ↗
44. Effects of ZnO Nanoparticles on the Mechanical and Antibacterial Properties of Polyurethane Coatings10.1016/j.porgcoat.2008.08.013 ↗