Oxidation‐Induced Microstructural Change of Si‐Ti‐C‐O Fibers
Source abstract
Abstract
Two types of Si‐Ti‐C‐O fibers STC(6HS) and STC(6H), with different C/Si molar ratios of 0.99 and 1.65, respectively, have been subjected to oxidation tests at high temperatures between 1000° and 1500°C. Both fibers showed different mass gain during the oxidation tests. In the unoxidized region, there was no change in the chemical composition. For STC(6HS), coarse ß‐SiC grains were formed throughout the region, while the grain coarsening in STC(6H) was restricted to the vicinity of the film/fiber interface. In this paper, the influence of free carbon on the oxidation‐induced microstructural change of Si‐Ti‐C‐O fibers is discussed.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. 10.1021/cr00037a01410.1021/cr00037a014 ↗
2. 10.1002/adma.1995007090310.1002/adma.19950070903 ↗
3. 10.1038/261683a010.1038/261683a0 ↗
4. 10.1007/BF0037627110.1007/BF00376271 ↗
5. 10.1007/BF0111191910.1007/BF01111919 ↗
6. Polymer‐Derived Ceramic Fibers
7. 10.1111/j.1151-2916.1993.tb07750.x10.1111/j.1151-2916.1993.tb07750.x ↗
8. 10.2320/jinstmet1952.55.3_29410.2320/jinstmet1952.55.3_294 ↗
9. 10.1007/BF0057677410.1007/BF00576774 ↗
10. 10.2109/jcersj.102.48210.2109/jcersj.102.482 ↗
11. High‐Temperature Crystallization Behavior of Si–Ti–C–O Fiber Cured by Electron Beam Irradiation10.2320/jinstmet1952.58.2_229 ↗
12. Microstructural Stability of Si–Ti–C–O Fibers at High Temperatures
13. Oxidation Kinetics of Amorphous Si‐Ti‐C‐O Fibers10.2320/jinstmet1952.56.2_175 ↗
14. 10.2109/jcersj.103.55710.2109/jcersj.103.557 ↗
15. Sato M. · 1994 · 209
16. 10.1016/S0921-5093(96)10288-410.1016/S0921-5093(96)10288-4 ↗
17. 10.1111/j.1151-2916.1991.tb04348.x10.1111/j.1151-2916.1991.tb04348.x ↗