journal article·2005-08

Initial Attempt to Characterize Oxidation Damage in C/Sic Composite Using an Ultrasonic Guided Wave Method

Don J. Roth, Michael J. Verrilli, Richard E. Martin, Laura M. Cosgriff

Publisher page

Abstract

An ultrasonic guided wave scan system was used to non‐destructively monitor damage over time and position in a C/enhanced SiC sample that was creep tested to failure at 1200°C in air at a stress of 69 MPa (10 ksi). The use of the guided wave scan system for mapping evolving oxidation profiles (via porosity gradients resulting from oxidation) along the sample length and predicting failure location was explored. The creep‐rupture tests were interrupted for ultrasonic evaluation every two hours until failure at ∼17.5 cumulative hours.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Surface Polishing Techniques · Advanced ceramic materials synthesis · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. M. C.HalbigandA. J.Eckel “Oxidation of Continuous Carbon Fibers Within a Silicon Carbide Matrix Under Stressed and Unstressed Conditions”; NASA/TM—2000‐210224.
2. M. C.HalbigandD. N.Brewer “Degradation of Continuous Fiber Ceramic Matrix Composites Under Constant Load Conditions”; NASA/TM—2000‐209681.10.1520/STP15021S ↗
3. Stress/Life Behavior of a C/SiC Composite in a Low Partial Pressure of Oxygen Environment Part I
4. 10.1002/9780470294741.ch4910.1002/9780470294741.ch49 ↗
5. Verrilli M. J. · 2000
6. H. E.Kautz “Acousto‐Ultrasonics to Assess Material and Structural Properties;”NASA/CR—2002‐211881.
7. A. L.Gyekenyesi H. E.Kautz andW.Cao “Damage Assessment of Creep Tested and Thermally Aged Udimet 520 Using Acousto‐Ultrasonics”; NASA/TM—2001‐210988.10.1115/2001-GT-0282 ↗
8. D. J.Roth L. M.Cosgriff Martin M. J.Verilli andR. T.Bhatt “Microstructural and Defect Characterization in Ceramic Composites Using an Ultrasonic Guided Wave Scan System”; NASA/TM—2003‐212518.10.1063/1.1711715 ↗
9. D. J.Roth M. J.Verrilli R.EMartin L. M.Harmon andA. L.Gyekenyesi “Characterization of C/Enhanced SiC Composite Creep Damage Using an Ultrasonic Guided Wave Scan System”; Presentation and Proceedings of 27th Annual Conference on Composites Materials and Structures January 27–30 2003 Cape Canaveral Cocoa Beach FL.
10. Rose J. L. · 1999 · 17
11. Determination of Plate Wave Velocities and Diffuse Field Decay Rates with Broadband Acousto‐Ultrasonic Signals
12. Review, Modeling and Statistical Analysis of Ultrasonic Velocity‐Pore Fraction Relations in Polycrystalline Materials
13. D. J.Roth M. J.Verilli R. E.Martin andL. M.Cosgriff “Characterization of C/Enhanced SiC Composite During Creep‐Rupture Tests Using an Ultrasonic Guided Wave Scan System”; NASA/TM—2004‐213055.