journal article·2010-07

Hertzian Indentation of a ZrB 2 –30% SiC Ultra‐High‐Temperature Ceramic up to 800°C in Air

Victor Zamora, Estíbaliz Sánchez‐González, Angel L. Ortiz, Pedro Miranda, Fernando Guiberteau

Publisher page

Abstract

The contact mechanical properties of the ZrB 2 –30% SiC ultra‐high‐temperature ceramic (UHTC) were studied from room temperature up to 800°C in air, by combining Hertzian indentation tests with finite element modeling. It was found that the elastic modulus and yield stress decrease with increasing temperature, especially above 600°C. It was also found that the ZrB 2 –30% SiC UHTC is “ductile” in the sense that its first damage mode is quasiplasticity, followed by cone cracking, and eventually by radial cracking. However, its contact‐damage resistance degrades as the temperature increases, again especially above 600°C. Nevertheless, it is highly damage tolerant because the critical loads for radial cracking are one order of magnitude greater than these for quasiplasticity. This is the first report on the temperature dependence of the Hertzian indentation of UHTCs, whose study is necessary if they are to be used in aerospace applications.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Oxidation‐Based Materials Selection for 2000°C+Hypersonic Aerosurfaces
2. The Hypersonic Environment
3. 10.1111/j.1551-2916.2007.01583.x10.1111/j.1551-2916.2007.01583.x ↗
4. Densification of ZrB2‐Based Composites and their Mechanical and Physical Properties
5. Reports from the Columbia Accident Investigation Board. Available at NASA Web sitehttp://caib.nasa.gov/news/report/default.html(accessed on October 28 2003).
6. 10.1016/j.jeurceramsoc.2006.10.01210.1016/j.jeurceramsoc.2006.10.012 ↗
7. 10.1111/j.1551-2916.2006.01339.x10.1111/j.1551-2916.2006.01339.x ↗
8. Indentation of Ceramics with Spheres
9. 10.1017/CBO978113917173110.1017/CBO9781139171731 ↗
10. 10.1016/j.jeurceramsoc.2009.03.01110.1016/j.jeurceramsoc.2009.03.011 ↗
11. 10.1007/978-3-662-40293-110.1007/978-3-662-40293-1 ↗
12. 10.1016/j.jeurceramsoc.2007.02.19110.1016/j.jeurceramsoc.2007.02.191 ↗
13. 10.1111/j.1551-2916.2007.01963.x10.1111/j.1551-2916.2007.01963.x ↗
14. 10.1017/CBO978051162312710.1017/CBO9780511623127 ↗
15. A Critical Evaluation of Indentation Techniques for Measuring Fracture Toughness
16. 10.1111/j.1151-2916.1959.tb15462.x10.1111/j.1151-2916.1959.tb15462.x ↗
17. 10.6028/jres.109.03610.6028/jres.109.036 ↗
18. 10.1016/S0955-2219(02)00111-510.1016/S0955-2219(02)00111-5 ↗
19. 10.1016/S0955-2219(00)00210-710.1016/S0955-2219(00)00210-7 ↗
20. 10.1016/j.actamat.2007.07.02710.1016/j.actamat.2007.07.027 ↗
21. 10.1007/s10853-006-1274-210.1007/s10853-006-1274-2 ↗
22. 10.1557/JMR.2004.021910.1557/JMR.2004.0219 ↗