journal article·2024-03-08

Plasticization of Polystyrene with Copolymers Based on High Oleic Soybean Acrylic Monomer

Najah Mhesn, Zoriana Demchuk, Yehor Polunin, Liying Wei, Stephen H. Foulger, Andriy S. Voronov, Igor Luzinov

ACS Applied Polymer Materials· Volume 6· Issue 5
Publisher page

Abstract

In this work, high oleic soybean oil was used to synthesize an acrylic monomer (HOSBM), which was copolymerized with myrcene and styrene at a 90:10 wt/wt feed ratio to obtain copolymers containing myrcene (HOSBM-M) and styrene (HOSBM-S). These copolymers were employed here as macromolecular plasticizers to modify the brittle nature of polystyrene (PS). Specifically, the soy-based copolymers were added to commodity polystyrene at 5–20 wt %, and the copolymer effect on the polymer blends’ structure and behavior was studied. We report on the blends’ morphology and thermal/mechanical properties and employ thermodynamic and mechanical models to understand the interactions between the PS matrix and the HOSBM copolymer dispersed phase. Microscopy indicated that the mixed materials have a phase-separated structure composed of the PS-based matrix and the copolymer-based dispersed phase. Our thermodynamic estimations and measurement of the thermal transitions showed that the blends are partially miscible, where a fraction of PS chains migrated into the dispersed phase and the copolymer was partially situated in the PS matrix. Therefore, HOSBM-M and HOSBM-S plasticize the PS matrix, decreasing the glass transition temperature and moduli. The mechanical properties of the blends depicted a trade-off between the flexural modulus, strength, and toughness. Although the PS/HOSBM-S blends showed decreased storage/flexural moduli and strength compared to neat PS, the decline was significantly lower than that demonstrated by the HOSBM-M blends. Moreover, adding the HOSBM-S copolymer to PS at 10–15 wt % loading enhances the material’s extensibility compared to pure PS. The trend in the toughness values shows that the optimal HOSBM-S loading is 10 wt % to obtain materials with the best middle ground between flexural modulus, strength, extensibility, and toughness.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · biodegradable polymer synthesis and properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Materials Science and Engineering, Clemson University, Clemson, South Carolina 29634, United States

Department of Coatings and Polymeric Materials, North Dakota State University, Fargo, North Dakota 58105, United States

Center for Optical Materials Science and Engineering Technologies (COMSET), Clemson University, Anderson, South Carolina 29625, United States

Department of Bioengineering, Clemson University, Clemson, South Carolina 29634, United States

Funding

National Science Foundation

References (52)

Show source-provided references
1. 10.1039/c0gc00264j10.1039/c0gc00264j ↗
2. 10.1021/acssuschemeng.6b0189010.1021/acssuschemeng.6b01890 ↗
3. 10.1021/acssuschemeng.7b0446210.1021/acssuschemeng.7b04462 ↗
4. 10.1002/app.4882710.1002/app.48827 ↗
5. 10.1002/cssc.20130089810.1002/cssc.201300898 ↗
6. 10.1016/j.polymdegradstab.2013.09.02510.1016/j.polymdegradstab.2013.09.025 ↗
7. Schebek, L.; Herrmann, C.; Cerdas, F. Progress in Life Cycle Assessment; Springer: Cham, 2019; p 171.10.1007/978-3-319-92237-9 ↗
8. 10.1016/j.polymer.2004.10.06010.1016/j.polymer.2004.10.060 ↗
9. Belgacem M. N. · 2008
10. 10.1002/1097-0126(200102)50:2<179::AID-PI603>3.0.CO;2-E10.1002/1097-0126(200102)50:2<179::AID-PI603>3.0.CO;2-E ↗
11. 10.3390/polym1009095210.3390/polym10090952 ↗
12. 10.3390/molecules2601011210.3390/molecules26010112 ↗
13. 10.1016/j.indcrop.2015.06.02210.1016/j.indcrop.2015.06.022 ↗
14. 10.11159/ijtan.2018.00510.11159/ijtan.2018.005 ↗
15. 10.1002/app.3163410.1002/app.31634 ↗
16. 10.1002/app.3281010.1002/app.32810 ↗
17. 10.1002/mame.20070015010.1002/mame.200700150 ↗
18. 10.1021/acssuschemeng.6b0268410.1021/acssuschemeng.6b02684 ↗
19. 10.13031/2013.3257310.13031/2013.32573 ↗
20. 10.1002/mame.20070015010.1002/mame.200700150 ↗
21. 10.1021/acssuschemeng.6b0268410.1021/acssuschemeng.6b02684 ↗
22. 10.13031/2013.3257310.13031/2013.32573 ↗
23. 10.1021/acssuschemeng.5b0031210.1021/acssuschemeng.5b00312 ↗
24. 10.1021/acssuschemeng.6b0189010.1021/acssuschemeng.6b01890 ↗
25. 10.3390/ijms2407610310.3390/ijms24076103 ↗
26. 10.1021/acsomega.6b0030810.1021/acsomega.6b00308 ↗
27. Białecka-Florjańczyk E. · 2007 · 39710.1016/B978-044452707-3/50024-0 ↗
28. Mark, J. E. Polymer Data Handbook, 2nd ed. Oxford University Press Oxford: Oxford, 2009; p 1250.
29. Ehrenstein, G. W. Polymeric Materials: Structure, Properties, Applications; Hanser; Hanser Gardner Publications: Munich; Cincinnati, OH, 2001; p 278.
30. Sperling, L. H. Introduction to Physical Polymer Science, 4th ed. John Wiley & Sons, Inc., 2006; p 845.
31. 10.1021/acsami.2c0745910.1021/acsami.2c07459 ↗
32. 10.1016/j.eurpolymj.2018.09.01010.1016/j.eurpolymj.2018.09.010 ↗
33. Odian, G. G. Principles of Polymerization; Wiley-Interscience: Hoboken, N.J., 2004; p 812.10.1002/047147875X ↗
34. Fried, J. R. Polymer Science and Technology, 3rd ed. Prentice Hall: Upper Saddle River, NJ, 2014; p 663.
35. Hiemenz, P. C.; Lodge, T. Polymer Chemistry, 2nd ed. CRC Press: Boca Raton, 2007; p 587.10.1201/9781420018271 ↗
36. Denn, M. M. Polymer Melt Processing: Foundations in Fluid Mechanics and Heat Transfer; Cambridge University Press: Cambridge, 2014; p 250.
37. 10.1002/pen.2088210.1002/pen.20882 ↗
38. 10.1021/acsami.0c0864910.1021/acsami.0c08649 ↗
39. 10.1016/S0032-3861(00)00557-710.1016/S0032-3861(00)00557-7 ↗
40. 10.1016/j.tsf.2012.04.02110.1016/j.tsf.2012.04.021 ↗
41. 10.1021/ma970124510.1021/ma9701245 ↗
42. Utracki L. A. · 201410.1007/978-94-007-6064-6 ↗
43. Utracki, L. A. Polymer Alloys and Blends: Thermodynamics and Rheology; Hauser Munich: Munich, 1990; p 356.
44. 10.1002/pen.76027050610.1002/pen.760270506 ↗
45. 10.1016/S0079-6700(97)00054-310.1016/S0079-6700(97)00054-3 ↗
46. 10.1002/app.4497510.1002/app.44975 ↗
47. 10.1016/S0032-3861(03)00471-310.1016/S0032-3861(03)00471-3 ↗
48. 10.1021/am402975a10.1021/am402975a ↗
49. 10.1016/j.polymer.2007.03.07210.1016/j.polymer.2007.03.072 ↗
50. 10.1021/acsami.7b0454610.1021/acsami.7b04546 ↗
51. Nielsen, L. E. Mechanical Properties of Polymers and Composites; Dekker: New York, 1974; Vol. 2, p 462.
52. 10.1177/089270571878570710.1177/0892705718785707 ↗