journal article·1941-03

EFFECT OF REPEATED WETTING AND DRYING ON PHYSICAL PROPERTIES OF A CLAY BODY*

W. R. Morgan

Publisher page

Abstract

A bstract Specimens of fine‐grained, red‐firing clay, which had been fired to temperatures corresponding to various stages of vitrification, were subjected to 200 cycles each of wetting at 100°F. and drying at 100°F. and 60% of relative humidity. This treatment, simulating weathering in mild climates, caused (1) a permanent gain in weight which was greater for the softer specimens; (2) a moisture expansion for the softer specimens but none for those near vitrification; (3) a fairly uniform decrease in modulus of elasticity for all specimens; and (4) a decrease in modulus of rupture for the softer specimens but an increase in strength for those that were completely vitrified. The data indicate that moisture expansion and a decrease in strength of soft‐fired clay bodies, caused by repeated wetting and drying, may be eliminated by proper vitrification.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Landfill Environmental Impact Studies · Recycling and utilization of industrial and municipal waste in materials production · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References

Reference metadata was not supplied for this record.