PolytetrafluoroethyleneIn Situ Nanofiber-Induced Stabilized Cyclic Olefin Copolymer Microporous Foam As a Thermal Insulation Material
Source abstract
Abstract
A microporous high-strength foam material with low thermal conductivity and high strength was developed for potential use as a wall-insulation material. Polytetrafluoroethylene (PTFE) was introduced to a matrix of cyclic olefin copolymer (COC) molecular chains containing norbornadiene, a natural heat insulator, using in situ fibrosis technology. The PTFE additive improved the melt strength of the COC matrix and greatly enhanced its foaming performance. The optimal COC–PTFE microporous foam obtained through scCO 2 foaming technology exhibited a higher cell density (2.44 × 10 10 cells/cm 3 ) and smaller cell size (6.35 μm) than COC foam (4.09 × 10 8 cells/cm 3 and 31.12 μm, respectively). Regulating the structure of the COC microporous foam improved the strength and reduced the thermal conductivity of the foam. In the optimal COC–PTFE foam, the compression performance exceeded that of COC by 434% and the thermal conductivity decreased to 37 mW/(m K) (from 46 mW/(m K) in COC).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Flame retardant materials and properties · Electromagnetic wave absorption materials · Polymer Foaming and Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
College of Chemistry and Materials Engineering
Beijing Technology and Business University
Beijing Key Laboratory of Quality Evaluation Technology for Hygiene and Safety of Plastics
Funding
National Natural Science Foundation of China
References (30)
Show source-provided references
1. 10.1080/1556724070154875710.1080/15567240701548757 ↗
2. 10.1088/1755-1315/108/5/05207010.1088/1755-1315/108/5/052070 ↗
3. 10.1002/er.575110.1002/er.5751 ↗
4. 10.1016/j.cej.2020.12825110.1016/j.cej.2020.128251 ↗
5. 10.1016/j.rser.2010.09.04010.1016/j.rser.2010.09.040 ↗
6. 10.1002/adma.20180100110.1002/adma.201801001 ↗
7. 10.1016/j.rser.2016.10.03910.1016/j.rser.2016.10.039 ↗
8. 10.1016/j.renene.2009.07.00910.1016/j.renene.2009.07.009 ↗
9. 10.1351/pac20057705080110.1351/pac200577050801 ↗
10. 10.1002/pola.2669910.1002/pola.26699 ↗
11. 10.1007/s10965-007-9119-510.1007/s10965-007-9119-5 ↗
12. 10.1002/app.3180410.1002/app.31804 ↗
13. 10.1007/s10965-012-9911-810.1007/s10965-012-9911-8 ↗
14. 10.1002/app.4222610.1002/app.42226 ↗
15. 10.1007/s00231-008-0417-110.1007/s00231-008-0417-1 ↗
16. 10.1021/am200021v10.1021/am200021v ↗
17. 10.1002/pen.2564310.1002/pen.25643 ↗
18. Martini, J. E. The Production and Analysis of Microcellular Foam. M.S. Thesis; Massachusetts Institute of Technology, 1981.
19. 10.1016/j.polymer.2021.12416510.1016/j.polymer.2021.124165 ↗
20. 10.1007/s10853-016-9776-z10.1007/s10853-016-9776-z ↗
21. 10.1007/s42823-019-00105-010.1007/s42823-019-00105-0 ↗
22. 10.1007/s13726-016-0499-410.1007/s13726-016-0499-4 ↗
23. 10.1016/j.eurpolymj.2017.11.00110.1016/j.eurpolymj.2017.11.001 ↗
24. 10.1177/0021955X23115461910.1177/0021955X231154619 ↗
25. 10.1016/j.eurpolymj.2023.11264310.1016/j.eurpolymj.2023.112643 ↗
26. 10.1016/j.mtsust.2023.10056410.1016/j.mtsust.2023.100564 ↗
27. 10.1016/j.jmrt.2022.12.16010.1016/j.jmrt.2022.12.160 ↗
28. 10.1016/j.compositesb.2020.10836110.1016/j.compositesb.2020.108361 ↗
29. 10.1016/j.polymer.2017.11.05310.1016/j.polymer.2017.11.053 ↗
30. 10.1007/s10765-014-1651-z10.1007/s10765-014-1651-z ↗