Synthesis of Zn-Zr and Zn-Zr-Mg Alloys from Mixed ZnO-ZrO 2 and ZnO-ZrO 2 -MgO in CaCl 2 -NaCl Molten Salt at 873 K
Source abstract
Abstract
Zinc alloys are promising for wide uses thanks to their moderate biodegradability, good mechanical properties, and relevant biocompatibility. In this study, Zn-Zr and Zn-Zr-Mg alloys were prepared through the electro-deoxidation of ZnO-ZrO 2 and ZnO-ZrO 2 -MgO mixtures in CaCl 2 -NaCl molten salt at 873 K. The electrochemical reduction mechanisms of ZnO, ZrO 2 , ZnO-MgO, and ZrO 2 -MgO composites were studied by cyclic voltammetry using metal cavity electrodes. The electrolysis parameters, such as the molar ratio of raw oxides and electrolysis time were also investigated. The results revealed promoted the reduction of ZrO 2 and MgO through the formation of Zn and Ca-Zn alloys. Meanwhile, high melting point Zr and Zn-Zr alloys were found important in collecting more Zn and Zn-Mg alloys. A complete reduction of ZnO-ZrO 2 and ZnO-ZrO 2 -MgO mixtures was achieved at ZnO contents above 2/3 of the total mass. Also, Zn, Zr, and Mg elements were homogeneously dispersed in the electrolyzed samples. In sum, the proposed method looks promising for the preparation of novel zinc-based alloys.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Molten salt chemistry and electrochemical processes · Extraction and Separation Processes · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Effect of the content and morphology of β‐compounds and precipitation on the corrosion behavior of biodegradable magnesium alloys10.1002/adem.202000752 ↗
2. Controlling the dissolution of iron through the development of nanostructured Fe-Mg for biomedical applications10.1016/j.actbio.2020.06.014 ↗
3. Recent developments in magnesium metal–matrix composites for biomedical applications: A review10.1021/acsbiomaterials.0c00678 ↗
4. Surface engineering of biodegradable magnesium alloys for enhanced orthopedic implants10.1002/smll.201904486 ↗
5. Evolution of metallic cardiovascular stent materials: A comparative study among stainless steel, magnesium and zinc10.1016/j.biomaterials.2019.119641 ↗
6. Response of human periosteal cells to degradation products of zinc and its alloy10.1016/j.msec.2019.110208 ↗
7. Alloying design of biodegradable zinc as promising bone implants for load-bearing applications10.1038/s41467-019-14153-7 ↗
8. A Review of Bioresorbable Implantable Medical Devices: Materials, Fabrication, and Implementation10.1002/adhm.202000790 ↗
9. Zinc exhibits ideal physiological corrosion behavior for bioabsorbable stents10.1002/adma.201300226 ↗
10. A biodegradable Zn-1Cu-0.1Ti alloy with antibacterial properties for orthopedic applications10.1016/j.actbio.2020.02.017 ↗
11. In vitro and in vivo studies of Zn-Mn biodegradable metals designed for orthopedic applications10.1016/j.actbio.2020.03.009 ↗
12. A study of degradation behaviour and biocompatibility of Zn-Fe alloy prepared by electrodeposition10.1016/j.msec.2020.111295 ↗
13. Structural and mechanical aspects of hypoeutectic Zn-Mg binary alloys for biodegradable vascular stent applications10.1016/j.bioactmat.2020.07.004 ↗
14. Insight into role and mechanism of Li on the key aspects of biodegradable ZnLi alloys: Microstructure evolution, mechanical properties, corrosion behavior and cytotoxicity10.1016/j.msec.2020.111049 ↗
15. Design of novel Zn-Ag-Zr alloy with enhanced strength as a potential biodegradable implant material10.1016/j.matdes.2019.108154 ↗
16. Effects of alloying elements (Ca and Sr) on microstructure, mechanical property and in vitro corrosion behavior of biodegradable Zn–1.5Mg alloy10.1016/j.jallcom.2015.10.116 ↗
17. Microstructure, mechanical properties, in vitro degradation behavior and hemocompatibility of novel Zn–Mg–Sr alloys as biodegradable metals10.1016/j.matlet.2015.07.151 ↗
18. Enhancement of corrosion resistance of a high Zn-yttrium aluminum alloy10.1016/j.jallcom.2019.152744 ↗
19. Influence of twinning-induced recrystallization on texture evolution in a high strain rate compressed Mg-Zn alloy10.1016/j.matchar.2020.110192 ↗
20. Segregation assisted grain boundary precipitation in a model Al-Zn-Mg-Cu alloy10.1016/j.actamat.2018.07.003 ↗
21. Direct electrochemical reduction of titanium dioxide to titanium in molten calcium chloride10.1038/35030069 ↗
22. Development of the Fray-Farthing-Chen cambridge process: towards the sustainable production of titanium and its alloys10.1007/s11837-017-2664-4 ↗
23. The electrochemical reduction processes of solid compounds in high temperature molten salts10.1039/c3cs60327j ↗
24. The electro-deoxidation of porous titanium dioxide precursors in molten calcium chloride under cathodic potential control10.1016/j.electacta.2009.02.006 ↗
25. Silicon electrochemistry in molten salts10.1021/acs.chemrev.9b00428 ↗
26. Direct electrochemical preparation of Ni-Zr alloy from mixture oxides in LiCl molten salt10.1149/2.1361713jes ↗
27. Complete reduction of high-density UO2 to metallic U in molten Li2O–LiCl10.1016/j.jnucmat.2017.07.036 ↗
28. Mechanistic insight of electrochemical reduction of Ta2O5 to tantalum in a eutectic CaCl2–NaCl molten salt10.1016/j.jallcom.2009.09.168 ↗
29. A study of cathode improvement for electro-deoxidation of Nb2O5 in a eutectic CaCl2–NaCl melt at 1073K10.1016/j.jallcom.2005.01.002 ↗
30. Selection about molten salts used for the electrochemical reduction of porous TiO2 pellets10.1149/1945-7111/ab8823 ↗
31. A novel preparation of Zr–Si intermetallics by electrochemical reduction of ZrSiO4 in molten salts10.1039/C5NJ01896J ↗
32. Direct synthesis of Mg–Ni compounds from their oxides10.1016/j.jallcom.2010.05.071 ↗
33. Direct synthesis of the hydrogen storage V–Ti alloy powder from the oxides by calcium co-reduction10.1016/j.jallcom.2004.04.137 ↗
34. Experimental investigations and thermodynamic modelling of KCl–LiCl–UCl3 system10.1016/j.calphad.2013.11.001 ↗
35. Novel electrochemical measurements on direct electro-deoxidation of solid TiO2 and ZrO2 in molten calcium chloride medium10.1007/s10800-010-0242-3 ↗
36. Electrochemical deoxidation of titanium foam in molten calcium chloride10.1007/s11663-007-9094-6 ↗
37. Electrochemical studies on reduction of solid Nb2O5 in Molten CaCl2-NaCl Eutectic10.1149/1.1830351 ↗