Performance of MXene Modified Molecularly Imprinted Polymer Based Electrodes Compared to Graphene for Electrochemical Sensing of Bilirubin
Source abstract
Abstract
This study presents a comparative analysis of MXene- and graphene-modified molecularly imprinted polymer (MIP) electrodes used for the electrochemical detection of bilirubin (BR), a crucial biomarker for diagnosing liver disorders, neonatal jaundice, and hemolytic diseases. Graphene and MXene were chosen due to their unique properties that enhance the performance of MIP-based electrochemical sensors. The MXene-modified MIP electrode exhibited higher sensitivity (4.685 μA μM−1 cm−2) and a lower limit of detection (LOD, 0.1 μM), which is notably better than that of the graphene-modified electrode (1.25 μA μM−1 cm−2, LOD: 0.42 μM). Nonetheless, the graphene-modified electrode showed higher stability, with 97% of its response remaining after six weeks, due to the rigid carbon network of graphene, while MXene had a retention level of 95%. Both electrodes exhibit high reproducibility (RSD 0.629% for MXene; 1.27% for graphene-modified electrode) and repeatability (RSD 1.29% for MXene; 2.31% for graphene-modified electrode). Additionally, MXene-modified electrodes are more specific towards BR than graphene-modified electrodes because MXene has surface functionality and efficient charge transfer. Therefore, an MXene-modified electrode is better suited for ultra-high sensitivity and selectivity requirements. On the other hand, long-term stability and robustness are more desirable for a graphene-modified electrode, allowing for more prolonged usage.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Carbon and Quantum Dots Applications · Electrochemical sensors and biosensors · Pharmacological Effects and Toxicity Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Bilirubin as a biomarker in liver disease10.1007/978-94-007-7742-2_25-1 ↗
2. Molecularly imprinted orthophenylenediamine with 〈scp〉 Ti3 C2 Tx MXene 〈/scp〉 -based biosensor for sensitive detection of bilirubin10.1002/pat.6346 ↗
3. Measurement and clinical usefulness of bilirubin in liver disease10.1515/almed-2021-0047 ↗
4. Alternative spectrophotometric method for determination of bilirubin and urobilinogen in urine samples using simultaneous injection effective mixing flow analysis10.1039/c3ay40192h ↗
5. Development of new methods for determination of bilirubin10.1016/j.jpba.2018.09.034 ↗
6. Bilirubin detection by different methods with special emphasis on biosensing: a review10.1016/j.sbsr.2021.100436 ↗
7. Langmuir–blodgett based ordered deposition of functionalized iron oxide nanoparticles for ultrasensitive detection of Escherichia coli O157: H710.1016/j.microc.2022.107708 ↗
8. Electrochemical sensor for bilirubin detection using paper-based screen-printed electrodes functionalized with silver nanoparticles10.3390/mi13111845 ↗
9. An enzymic method for the determination of bilirubin using an oxygen electrode10.1002/(SICI)1521-4109(20000301)12:4<292::AID-ELAN292>3.0.CO;2-3 ↗
10. Recent development in the design of artificial enzymes through molecular imprinting technology10.1039/D2TB00276K ↗
11. MXene-modified molecularly imprinted polymers as an artificial bio-recognition platform for efficient electrochemical sensing: progress and perspectives10.1039/D2CP02330J ↗
12. Molecularly imprinted polymer (MIP) based electrochemical sensors and their recent advances in health applications10.1016/j.snr.2023.100153 ↗
13. Recent progress of functionalized nanomaterials-based biosensing for monitoring of food- and water-borne pathogens10.1016/j.enmm.2024.100914 ↗
14. Preparation and evaluation of monolithic molecularly imprinted stationary phase for S -naproxen10.1016/S2095-1779(11)70005-3 ↗
15. Introduction to MIP synthesis, characteristics and analytical application10.1016/bs.coac.2019.05.010 ↗
16. Molecular imprinting: perspectives and applications10.1039/C6CS00061D ↗
17. Molecularly imprinted hornlike polymer@electrochemically reduced graphene oxide electrode for the highly selective determination of an antiemetic drug10.1016/j.aca.2020.10.014 ↗
18. Electrochemical sensing of lactate by using an electrode modified with molecularly imprinted polymers, reduced graphene oxide and gold nanoparticles10.1007/s00604-019-3898-3 ↗
19. 2D material-based sensing devices: an update10.1039/D2TA07653E ↗
20. Reduced graphene oxide-gold nanoparticle nanohybrid modified cost-effective paper-based biosensor for procalcitonin detection10.1002/slct.202202642 ↗
21. Multiwalled carbon nanotube modified microfluidic-based biosensor chip for nucleic acid detection10.1016/j.snb.2018.03.118 ↗
22. Molecularly imprinted electrochemical sensors based on Ti3C2Tx -MXene and graphene composite modifications for ultrasensitive cortisol detection10.1021/acs.analchem.3c01715 ↗
23. Molecularly imprinted polymer biosensor based on nitrogen-doped electrochemically exfoliated Graphene/Ti3 CNTX MXene nanocomposite for metabolites detection10.1021/acsami.4c01973 ↗
24. MXenes—a new class of two-dimensional materials: structure, properties and potential applications10.3390/nano11123412 ↗
25. Graphene properties, synthesis and applications: a review10.1007/s11837-022-05505-8 ↗
26. Development of conducting cellulose paper for electrochemical sensing of procalcitonin10.1007/s00604-022-05596-9 ↗
27. Large-scale synthesis of graphene and other 2D materials towards industrialization10.1038/s41467-022-29182-y ↗
28. H2O2-free strategy derived from hummers method for preparing graphene oxide with high oxidation degree10.1016/j.flatc.2023.100487 ↗
29. Synthesis, characterization and antifungal property of Ti3C2Tx MXene nanosheets10.1016/j.ceramint.2020.05.118 ↗
30. Ti3C2Tx MXene modified indium tin oxide (ITO) electrode for electrochemical sensing of bilirubin based on a molecularly imprinted pyrrole polymer10.1088/1402-4896/ad36f6 ↗
31. Antibody immobilized cysteamine functionalized-gold nanoparticles for aflatoxin detection10.1016/j.tsf.2010.08.071 ↗
32. Quantum dot-based microfluidic biosensor for cancer detection10.1063/1.4921203 ↗
33. Quantum dot modified interface for electrochemical immunosensing of procalcitonin for the detection of urinary tract infection10.1016/j.aca.2018.12.047 ↗
34. Rapid removal of template from molecularly imprinted polymers by accelerated solvent extraction10.1016/S1872-2040(07)60044-9 ↗
35. Quantum dots self assembly based interface for blood cancer detection10.1021/la401431q ↗
36. Ultrasound-assisted synthesis of graphene@MXene hybrid: a novel and promising material for electrochemical sensing10.1016/j.ultsonch.2022.106208 ↗
37. Facile synthesis and characterization of graphene nanosheets10.1021/jp710931h ↗
38. Chitosan encapsulated quantum dots platform for leukemia detection10.1016/j.bios.2012.05.010 ↗
39. Quantum dot monolayer for surface plasmon resonance signal enhancement and DNA hybridization detection10.1016/j.bios.2016.02.013 ↗
40. Factors affecting preparation of molecularly imprinted polymer and methods on finding template-monomer interaction as the key of selective properties of the materials10.3390/molecules26185612 ↗
41. A brief overview of molecularly imprinted polymers: highlighting computational design, nano and photo-responsive imprinting10.1016/j.talo.2021.100072 ↗
42. A sensitive and selective sensor for dopamine determination based on a molecularly imprinted electropolymer of o-aminophenol10.1016/j.snb.2009.04.067 ↗
43. Sensitive and selective determination of dopamine by electrochemical sensor based on molecularly imprinted electropolymerization of o-phenylenediamine10.1039/c3ay26200f ↗
44. Template removal in molecular imprinting: principles, strategies, and challenges10.1016/B978-0-12-822117-4.00014-9 ↗
45. To remove or not to remove? The challenge of extracting the template to make the cavities available in molecularly imprinted polymers (MIPs)10.3390/ijms12074327 ↗
46. Highly selective and sensitive molecularly imprinting electrochemical sensing platform for bilirubin detection in saliva10.1016/j.microc.2021.106367 ↗
47. Non-enzymatic detection of bilirubin based on a graphene–polystyrene sulfonate composite10.1039/C5RA06681F ↗
48. Molecular imprinting polymer with polyoxometalate/carbon nitride nanotubes for electrochemical recognition of bilirubin10.1016/j.electacta.2017.06.053 ↗
49. Studying the synergistic effects of molecularly imprinted orthophenylenediamine and MXene/COOH-MWCNT composite for vitro diagnosis of bilirubin in human serum10.1002/app.56703 ↗
50. MXene/PEDOT: PSS composite-modified electrode for electrochemical sensing of bilirubin by molecularly imprinted ortho-phenylenediamine10.1007/s00604-024-06875-3 ↗
51. Fabrication of the enzyme-less voltammetric bilirubin sensor based on sol-gel imprinted polymer10.1002/elan.201900410 ↗
52. Voltammetric sensing of bilirubin based on nafion/electrochemically reduced graphene oxide composite modified glassy carbon electrode10.2174/157341101102150223123009 ↗
53. Intrinsic strength and failure behaviors of graphene grain boundaries10.1021/nn3001356 ↗
54. Graphene mechanics: current status and perspectives10.1146/annurev-chembioeng-061114-123216 ↗