Electrodeposition of Iridium and Rhenium Layers from Molten Salts and Behavior of Ir/Re-based Coatings under High-Temperature Oxidation Conditions
Source abstract
Abstract
Iridium and rhenium layers are part of multilayer coatings for ultra-high-temperature applications. The quality of Ir/Re coatings affects the service life of aerospace vehicles and depends on the manufacturing method. Electrodeposition from molten salt is a relatively simple and inexpensive method for depositing continuous Ir and Re layers on complex shaped substrates. This review analyzes important aspects concerning the electroreduction mechanism and kinetics of Ir-containing complexes in chloride melts and Re-containing complexes in halide and oxyfluoroborate melts, the initial stages of electrocrystallization, as well as the influence of electrolysis conditions on the structure, texture, morphology, and mechanical properties of Ir, Re, and Ir/Re layers. In addition, the oxidation patterns of Ir/Re coatings on C/C composites and the resistance to high-temperature ablation of Ir/Re/C/C with an upper thermal barrier Ir-X (X=Al, Hf, Zr) layer are considered. The generalization of these data is important for predicting research directions related to improving the performance of Ir/Re and Ir-X/Ir/Re functional coatings for aerospace applications.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Semiconductor materials and devices · Semiconductor materials and interfaces · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Oxidation behaviors of Ir–Hf and Ir–Zr coatings under different air pressures at 1800 °C10.1016/j.surfcoat.2023.129640 ↗
2. Ablation behavior of an Ir-Hf coating: A novel idea for ultra-high temperature coatings in non-equilibrium conditions10.1016/j.jallcom.2019.152829 ↗
3. Oxidation-based materials selection for 2000 °C + hypersonic aerosurfaces: theoretical considerations and historical experience10.1023/B:JMSC.0000041686.21788.77 ↗
4. Green monopropellant 100mN thruster10.2514/6.2021 ↗
5. Review of state-of-the-art green monopropellants: for propulsion systems analysts and designers10.3390/aerospace8010020 ↗
6. Iridium coating: processes, properties and application. Part I. Processes for protection in high-temperature environments against oxidation and corrosion10.1595/205651317X693606 ↗
7. Oxidation-protective iridium and iridium-rhodium coatings produced by electrodeposition from molten salts10.1149/1.2721466 ↗
8. Behaviour of Ir–24 at.-%Ta films on Ni based single crystal superalloys10.1179/174329305X23218 ↗
9. Smart coatings—multilayered and multifunctional in situ ultrahigh-temperature coatings10.1016/B978-008044964-7/50014-5 ↗
10. Properties and applications of rhenium and its alloys
11. Rhenium—a unique rare metal10.1080/10426919408934977 ↗
12. Evaluations of properties and special features for high temperature application of rhenium10.1063/1.41837 ↗
13. Oxidation behavior of rhenium at high temperatures10.1016/0956-716X(93)90593-H ↗
14. Pure rhenium metal10.1109/45.481375 ↗
15. Rhenium used as an interlayer between carbon–carbon composites and iridium coating: adhesion and wettability10.1016/j.surfcoat.2013.07.013 ↗
16. Incorporation of iridium into electrodeposited rhenium–nickel alloys10.1016/j.electacta.2012.10.094 ↗
17. Engineering issues of iridium coated rhenium rockets10.1080/10426919808935297 ↗
18. Fabrication processes for iridium/rhenium combustion chambers10.1080/10426919808935298 ↗
19. Growth kinetics and microstructure of MOCVD iridium coating from iridium(III) acetylacetonate with hydrogen10.1016/j.apsusc.2014.12.146 ↗
20. Atomic layer deposition of Ir−Pt Alloy films10.1021/cm9031978 ↗
21. Modern solutions for functional coatings in CVD processes10.3390/coatings12091265 ↗
22. Study of Iridium (Ir) thin films deposited on to SiO2 substrates
23. Low-temperature deposition of iridium thin films by pulsed laser deposition10.1016/j.vacuum.2007.09.003 ↗
24. Electrochemical characteristics of iridium coating by double glow plasma discharge process on titanium alloy substrates10.1080/02670844.2019.1579400 ↗
25. Baraboshkin · 1976
26. The Effects of pH and temperature on electrodeposition of Re-Ir-Ni coatings from aqueous solutions10.1149/2.0281501jes ↗
27. Electrodeposition of rhenium and its alloys10.1134/S102319351609010X ↗
28. Electrodeposition of rhenium with suppressed hydrogen evolution from water-in-salt electrolyte10.1016/j.elecom.2018.06.003 ↗
29. Pulse and pulse/reverse techniques for electrodeposition of rhenium and refractory metals10.1149/MA2023-02261399mtgabs ↗
30. Electrochemistry of refractory metals in molten salts: application for the creation of new and functional materials10.1351/PAC-CON-08-08-09 ↗
31. Electrodeposition of Ir on platinum in NaCl-KCl molten salt10.1016/S1003-6326(11)61542-2 ↗
32. Electrodeposition of platinum metals and alloys from chloride melts10.2298/JMMB0302201S ↗
33. Equilibrium potentials of iridium in the molten ternary eutectic NaCl-KCl-CsCl
34. Preparation of high-purity iridium by electrolysis of melted salts
35. Features of electrodeposition of platinum metals from chloride melts
36. Liquidus temperature and electrical conductivity of the molten CsCl–NaCl–KCl eutectic containing IrCl310.1134/S003602952102021X ↗
37. Electrowinning and annealing of Ir—Re—Ir material10.17580/tsm.2017.11.10 ↗
38. Anodic processes during the dissolution of iridium in a chloride melt
39. The form of electrodeposited iridium ions in a molten chloride salt and the effects of different iridium concentrations10.3390/coatings14111388 ↗
40. Electrocrystallization of iridium on the graphite, rhenium and iridium electrode from the NaCl-KCl-CsCl-IrCl3 molten salts10.1016/j.jelechem.2017.02.039 ↗
41. Electrochemical studies of Ir coating deposition from NaCl-KCl-CsCl molten salts10.1016/j.surfcoat.2017.05.032 ↗
42. On the influence of temperature on the mechanism of cathodic reduction of iridium from a NaCl-KCl-CsCl melt
43. Cathodic processes during electrodeposition of iridium from the molten eutectic KCl-NaCl-CsCl
44. Oscillographic polarographic waves for the reversible deposition of metals on solid electrodes10.1021/ja01099a013 ↗
45. Simulation of cyclic voltammograms for 3D diffusion-controlled growth and dissolution of new phase nuclei10.1016/j.jelechem.2025.119020 ↗
46. Effects of cathodic current density and temperature on morphology and microstructure of iridium coating prepared by electrodeposition in molten salt under the air atmosphere10.1016/j.apsusc.2012.11.041 ↗
47. Iridium coating prepared on rhenium substrate by electrodeposition in molten salt in the air atmosphere10.1016/j.surfcoat.2011.08.058 ↗
48. Comparative investigation of iridium coating electrodeposited on molybdenum, rhenium and C/C composite substrates in molten salt in the air atmosphere10.1016/j.phpro.2013.11.038 ↗
49. The method of electrolytic preparation iridium coating layer in chloro-iridic acid cesium-chlorides molten salts
50. Three-dimensional nucleation and growth under galvanostatic conditions10.1007/s10008-012-1911-4 ↗
51. Theoretical modeling of electrochemical nucleation and growth of a single metal nanocluster on a nanoelectrode10.1039/d0ra00608d ↗
52. Iridium coatings with various grain structures prepared by electrodeposition from molten salts: Growth mechanism and high temperature oxidation resistance10.1016/j.surfcoat.2017.06.057 ↗
53. Budevski · 1996
54. Theoretical and experimental studies of multiple nucleation10.1016/0013-4686(83)85163-9 ↗
55. Three-dimensional nucleation with diffusion controlled growth. Part I. Number density of active sites and nucleation rates per site10.1016/0022-0728(84)80207-7 ↗
56. Kinetics of the electrocrystallization of thin films of calomel10.1039/TF9625802200 ↗
57. Analysis of the geometrical–probabilistic models of electrocrystallization10.1134/S0036029516080061 ↗
58. Modeling and simulation of 3D electrochemical phase formation under mixed kinetic-diffusion growth control10.1007/s10008-023-05603-w ↗
59. Formation of an electrode deposit under galvanostatic conditions10.1134/S0036029518080086 ↗
60. Gamburg · 2011
61. Laminar iridium coating produced by pulse current electrodeposition from chloride molten salt10.1016/j.apsusc.2013.06.064 ↗
62. Growth mechanism and mechanical property of laminar iridium coating by electrodeposition10.1016/j.ijrmhm.2015.01.009 ↗
63. Fused salt electroplating preparation method for non-columnar crystal tissue iridium coating
64. A brief guide to the structure of high-temperature molten salts and key aspects making them different from their low-temperature relatives the ionic liquids10.1021/acs.jpcb.1c01065 ↗
65. Speciation of rhenium in chloride melts: spectroscopic and electrochemical study10.1515/zna-2008-5-618 ↗
66. Reactions and speciation of technetium and rhenium in chloride melts: a spectroscopy study10.1039/B205978A ↗
67. The spectrum of potassium hexachlororhenate (IV) in fused salts10.1021/ic50040a003 ↗
68. A spectroscopic study of the behavior of rhenium (III) Chlorides in Molten Salts10.1021/ic50045a023 ↗
69. Electrochemical studies on rhenium in fused LiCl-KCl eutectic10.1016/0013-4686(72)90030-8 ↗
70. Equilibrium of rhenium in the eqimole melt potassium chloride and sodium chloride containing chloride of rhenium
71. Rhenium electrochemistry. chemistry and electrodeposition from molten salts10.1007/978-94-015-9135-5_23 ↗
72. Electroreduction of rhenium complexes in molten halides and oxohalides
73. Electrochemical study of stabilization higher oxidation states of d- and f-metals in molten salts10.20964/2016.08.53 ↗
74. Electrodeposition of rhenium from chloride melts - electrochemical nature, structure and applied aspects10.2298/JMMB0302149V ↗
75. Kinetics of rhenium electrodeposition from a chloride melt
76. Polarization dependence of a rhenium electrode on the cationic composition of the electrolyte
77. Structure of continuous rhenium layers electrodeposited from chloride melts of different cationic composition
78. Study of the effect of oxygen in the molten CsCl–Cs2ReCl6 electrolyte on the texture and morphology of rhenium coatings
79. Electrochemical behaviour of perrhenate ions in molten alkali fluorides10.1007/BF00233910 ↗
80. Rhenium behavior in the KF-KBF4-B2O3-KReO4 melt10.1088/1757-899X/734/1/012024 ↗
81. Melting behavior and densities of K2B2OF6 melts containing KReO410.3390/pr11113148 ↗
82. Rhenium electrodeposition and its electrochemical behavior in molten KF-KBF4-B2O3-KReO410.3390/ma15238679 ↗
83. Electrochemical nucleation and growth of rhenium on glassy carbon in the KF-KBF4-B2O3-KReO4 Melt10.1149/2.0531916jes ↗
84. Rhenium electrowinning in the KF-KBF4-B2O3-KReO4 Melt10.1149/2.0551810jes ↗
85. Density and viscosity of the (LiF-NaF-KF)eut-KBF4-B2O3 melts10.1016/S0167-7322(02)00063-6 ↗
86. Borate fluoride and fluoroborate in alkali-metal borate prepared by an open high-temperature solution method10.1021/ic502625b ↗
87. Black rhenium coating prepared on graphite substrate by electrodeposition in NaCl-KCl-CsCl-K2ReCl6 molten salts10.1016/j.ijrmhm.2017.06.010 ↗
88. A comparative study of rhenium coatings prepared on graphite wafers by chemical vapor deposition and electrodeposition in molten salts10.1007/s12598-019-01359-3 ↗
89. Structure of continuous rhenium deposits obtained by electrolysis of chloride melts
90. On the possibility of using the high-temperature galvanoplastic method for the manufacture of products from rhenium and molybdenum
91. Preparation of rhenium foil by electrolysis of molten salts
92. Electrochemical method for deposition of rhenium from melts
93. Preparation of compact rhenium by electrolysis of molten salts
94. Epitaxial growth of rhenium on intrinsic and foreign substrates10.1134/S1023193508060086 ↗
95. Electrodeposition of rhenium onto oriented rhenium foils from salt Melts110.1023/A:1013784530337 ↗
96. Liquidus temperature and electrical conductivity of molten eutectic CsCl-NaCl-KCl Containing ReCl410.1021/acs.jced.8b00758 ↗
97. Morphologies and textures of rhenium coatings electrodeposited in chloride molten salts10.1016/j.surfcoat.2021.127887 ↗
98. Effects of CsCl content on microstructure and mechanical properties of electrodeposited rhenium coatings in NaCl-KCl-CsCl molten salts10.1016/j.surfcoat.2022.128554 ↗
99. Surface morphology, microstructure and emissivity of rhenium electrodeposited from molten salts10.1016/j.surfcoat.2023.130122 ↗
100. Melt for electrochemical deposition of rhenium coatings