journal article·2025-09-01

Thermo-Mechanical Modeling of Electrolyte Evaporation Under Compressive Load and Preventive Charging Protocol in Lithium Batteries

Anop Mundel, Abhishek Sarkar

Publisher page

Abstract

For sustainability, a reliable energy storage system is essential, and lithium-ion battery (LIB) is one of the most prominent among the available storage solutions. However, LIB has various safety concerns associated with overheating. In this work, a chemo-mechano-thermal model is developed to simulate conditions of electrolyte evaporation and thermal runaway in LIB under fast charging (1–7 C) and compressive load (0–100 MPa) conditions. A separator pore-closure model is utilized to simulate porosity changes under compressive load. An electrolyte evaporation model is developed and coupled with the thermal model to predict concentration variations of LiPF6 in EC:DMC (1:1) during overheating. The electrolyte electrical conductivity is modelled, depending on electrolyte concentration, solvent evaporation and separator porosity. A parametric study is performed constituting of five different cathode materials: LCO, NMC333, NMC532, NMC622, NMC811, with graphite (C) as the anode. Contour maps are presented to parametrically study the maximum cell temperature, electrolyte conductivity, and heat generation, for different compressive loads, charging rates and convective coefficients. To mitigate overheating, two charging protocols, i.e., pulse and step charging, are developed to optimize the maximum cell temperature and charging time.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Advanced Battery Technologies Research · Membrane Separation and Gas Transport

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (68)

Show source-provided references
1. Challenges for rechargeable Li batteries10.1021/cm901452z ↗
2. Issues and challenges facing rechargeable lithium batteries10.1038/35104644 ↗
3. Building better batteries10.1038/451652a ↗
4. A critical review of thermal issues in lithium-ion batteries10.1149/1.3515880 ↗
5. Catastrophe analysis of cylindrical lithium ion battery10.1007/s11071-010-9685-7 ↗
6. Runaway risk of forming toxic compounds10.1038/424635b ↗
7. Simulation of abuse tolerance of lithium-ion battery packs10.1016/j.jpowsour.2006.10.013 ↗
8. Gas generation measurement and evaluation during mechanical processing and thermal treatment of spent Li-ion batteries10.1016/j.wasman.2018.11.029 ↗
9. Thermal-runaway experiments on consumer Li-ion batteries with metal-oxide and olivin-type cathodes10.1039/c3ra45748f ↗
10. Thermal runaway caused fire and explosion of lithium ion battery10.1016/j.jpowsour.2012.02.038 ↗
11. Mechanism of gases generation during lithium-ion batteries cycling10.1149/2.0041906jes ↗
12. Safety mechanisms in lithium-ion batteries10.1016/j.jpowsour.2005.12.002 ↗
13. Impact of chemical follow-up reactions for lithium ion electrolytes: generation of nucleophilic species, solid electrolyte interphase, and gas formation10.1149/2.0621704jes ↗
14. In situ analysis of gas generation in lithium-ion batteries with different carbonate-based electrolytes10.1021/acsami.5b08399 ↗
15. Quantification and simulation of thermal decomposition reactions of Li-ion battery materials by simultaneous thermal analysis coupled with gas analysis10.1016/j.jpowsour.2019.226774 ↗
16. Rapid impedance growth and gas production at the Li-Ion cell positive electrode in the absence of a negative electrode10.1149/2.1031614jes ↗
17. Thermal decomposition of LiPF 6 -based electrolytes for lithium-ion batteries thermal decomposition of LiPF 6 -based electrolytes for lithium-ion10.1149/1.2083267 ↗
18. The role of mechanically induced separator creep in lithium-ion battery capacity fade10.1016/j.jpowsour.2011.05.023 ↗
19. Modeling vaporization, gas generation and venting in li-ion battery cells with a dimethyl carbonate electrolyte10.1149/2.0631709jes ↗
20. Study of thermal–runaway in batteries I. theoretical study and formulation10.1149/1.3592486 ↗
21. Thermal runaway inhibitors for lithium battery electrolytes10.1016/j.jpowsour.2006.06.008 ↗
22. Thermal model for a Li-ion cell10.1149/1.2817888 ↗
23. The thermal conductivity of dimethyl carbonate in the liquid phase10.1016/j.fluid.2003.10.018 ↗
24. Thermal analysis of lithium-ion batteries10.1016/j.jpowsour.2004.05.064 ↗
25. Transient three-dimensional thermal model for batteries with thin electrodes10.1016/j.jpowsour.2013.05.175 ↗
26. Multi-scale, electro-thermal model of NMC battery cell10.1109/TVT.2019.2943052 ↗
27. Effects of a separator on the electrochemical and thermal performances of lithium-ion batteries: a numerical study10.1021/acs.energyfuels.0c02609 ↗
28. Thermal behavior and decomposition kinetics of six electrolyte salts by thermal analysis10.1016/j.jpowsour.2005.05.085 ↗
29. Modeling of galvanostatic charge and discharge of the lithium/polymer/insertion cell10.1149/1.2221597 ↗
30. Temperature and concentration dependence of the ionic transport properties of lithium-ion battery electrolytes10.1149/2.0571912jes ↗
31. Impact of lithium composition on structural, electronic and optical properties of lithium cobaltite prepared by solid-state reaction10.3329/jsr.v6i2.17900 ↗
32. Electrochemical and electronic properties of LiCoO 2 cathode investigated by galvanostatic cycling and EIS10.1039/c2cp23626e ↗
33. Modeling of separator failure in lithium-ion pouch cells under compression10.1016/j.jpowsour.2019.226756 ↗
34. Lithium ion battery production10.1016/j.jct.2011.09.005 ↗
35. Parametric analysis of electrode materials on thermal performance of lithium-ion battery: a material selection approach10.1149/2.0061809jes ↗
36. Chemical stability and long-term cell performance of low-cobalt, Ni-Rich cathodes prepared by aqueous processing for high-energy Li-Ion batteries10.1016/j.ensm.2019.08.020 ↗
37. A model predictive control application for a constrained fast charge of lithium-ion batteries10.3384/ecp19157229 ↗
38. Optimized charging of lithium-ion battery for electric vehicles: Adaptive multistage constant current–constant voltage charging strategy10.1016/j.renene.2019.08.077 ↗
39. A modified multiphysics model for lithium-ion batteries with a LixNi1/3Mn1/3Co1/3O2 electrode10.1016/j.electacta.2015.06.015 ↗
40. Modeling and simulation of inhomogeneities in a 18650 nickel-rich, silicon-graphite lithium-ion cell during fast charging10.1016/j.jpowsour.2018.11.043 ↗
41. Galvanostatic intermittent titration and performance based analysis of LiNi0.5Co0.2Mn0.3O2 cathode10.1149/2.1701713jes ↗
42. A modeling approach to study the performance of Ni-rich layered oxide cathode for lithium-ion battery10.1016/j.commatsci.2021.110559 ↗
43. Electrode mesoscale as a collection of particles: coupled electrochemical and mechanical analysis of NMC cathodes10.1149/1945-7111/ab632b ↗
44. Characterization of electronic and ionic transport in Li1-xNi0.33Mn0.33Co0.33O2 (NMC 333 ) and Li1-xNi0.50Mn0.20Co0.30O2 (NMC 523) as a function of Li content10.1149/2.0131608jes ↗
45. Electrochemical-mechanical parameterization and modeling of expansion, pressure, and porosity evolution in NMC811∣SiOx-Graphite lithium-ion cells10.1149/1945-7111/ace1aa ↗
46. Mathematical modeling of energy-dense NMC electrodes: I. determination of input parameters10.1149/1945-7111/ac653a ↗
47. Communication—Implications of local current density variations on lithium plating affected by cathode particle size10.1149/2.0711904jes ↗
48. Thermodynamic model development for lithium intercalation electrodes10.1016/j.jpowsour.2008.07.077 ↗
49. Investigating lithium plating in lithium-ion batteries at low temperatures using electrochemical model with NMR assisted parameterization10.1149/2.0461706jes ↗
50. Thermodynamic analysis of LiNi0.6Mn0.2Co0.2O2(NMC622) voltage hysteresis induced through high voltage charge10.1021/acsaem.1c02334 ↗
51. Development of experimental techniques for parameterization of multi-scale lithium-ion battery models10.1149/1945-7111/ab9050 ↗
52. A volume averaged approach to the numerical modeling of phase-transition intercalation electrodes presented for LixC610.1149/2.015301jes ↗
53. The energetics of heterogeneous deformation in open-cell solid foams10.1098/rspa.2000.0707 ↗
54. Permeability of open-cell foams under compressive strain10.1016/j.ijsolstr.2006.12.025 ↗
55. Experimental and modeling of conductivity for electrolyte solution systems10.1021/acsomega.0c03013 ↗
56. Thermally conductive separator with hierarchical nano/microstructures for improving thermal management of batteries10.1016/j.nanoen.2016.01.026 ↗
57. Theoretical analysis of stresses in a lithium ion cell10.1149/1.3261809 ↗
58. Effective thermal conductivity of lithium-ion battery electrodes in dependence on the degree of calendering10.1002/ente.202300259 ↗
59. Electrochemical analysis of lithiated graphite anodes10.1149/1.1553788 ↗
60. Cathode chemistries and electrode parameters affecting the fast charging performance of Li-ion batteries10.1115/1.4045567 ↗
61. Methodology to determine the heat capacity of lithium-ion cells10.1016/j.jpowsour.2018.05.084 ↗
62. Chemical trends in the lattice thermal conductivity of Li(Ni, Mn, Co)O2 (NMC) battery cathodes10.1021/acs.chemmater.0c02908 ↗
63. Separating electronic and ionic conductivity in mix-conducting layered lithium transition-metal oxides10.1016/j.jpowsour.2018.05.005 ↗
64. Heat capacity of liquids: critical review and recommended values. Supplement ii10.1063/1.3182831 ↗
65. Thermodynamic properties of dimethyl carbonate10.1063/1.3664084 ↗
66. National Center for Biotechnology Information · 2025
67. National Center for Biotechnology Information · 2025
68. Permeability of open-cell foamed materials10.1177/0021955X6600200112 ↗