A Novel Route for Electrolytic Production of Very Branchy Copper Dendrites under Extreme Conditions
Source abstract
Abstract
Copper electrodeposition in a form of powder was examined using the pulsating overpotential (PO) regime from the sulfate electrolyte without or with an addition of various concentrations of chloride ions. Morphological and structural characteristics of the produced particles were analyzed by the scanning electron microscope (SEM) and the X-ray diffraction (XRD) method. The final morphology of Cu powders was determined with two parallel processes: a) suppression of hydrogen evolution reaction due to pause duration considerably longer than the deposition time, and b) catalytic effect of added chlorides. Depending on the amplitude of overpotential applied, addition of chlorides into the solution led to either an appearing of dendrites or to formation of very branchy dendrites, what confirms a catalytic effect of these ions on the process of Cu electrolysis. The novel forms of copper dendrites, such as the needle-like and the 2D (two dimensional), were identified in this investigation, and the catalytic effect of chlorides on copper electrodeposition has been just discussed by morphological analysis of these dendritic forms. The XRD analysis of the copper dendrites obtained with an addition of chlorides showed predominantly oriented the Cu crystallites in (111) plane.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Nanoporous metals and alloys · Theoretical and Computational Physics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Popov · 2016 · 110.1007/978-3-319-26073-0 ↗
2. Influence of the shape of copper powder particles on the crystal structure and some decisive characteristics of the metal powders10.3390/met9010056 ↗
3. The effect of benzoic acid on the corrosion and stabilisation of electrodeposited copper powder10.1016/j.hydromet.2003.08.005 ↗
4. Synthesis of spherical nanosized copper powder by ultrasonic spray pyrolysis
5. Production of metallic powders from aqueous solutions without an external current source
6. Naboychenko · 2009 · 33110.1016/B978-1-85617-422-0.00016-1 ↗
7. Nanosized copper powders prepared by gel-casting method and their application in lubricating oil10.1016/S1003-6326(18)64756-9 ↗
8. Synthesis of Cu nanoparticles by chemical reduction method10.1016/S1003-6326(19)65058-2 ↗
9. Morphologies of electrochemically formed copper powder particles and their dependence on the quantity of evolved hydrogen10.1016/j.powtec.2007.10.014 ↗
10. Effect of electrolysis parameters on the morphologies of copper powder obtained in a rotating cylinder electrode cell10.1016/j.powtec.2010.03.003 ↗
11. Effect of electrolysis parameters on the morphologies of copper powder obtained at high current densities10.2298/JSC110627196O ↗
12. Correlate between morphology of powder particles obtained by the different regimes of electrolysis and the quantity of evolved hydrogen10.1016/j.powtec.2012.01.014 ↗
13. Modelling the dynamic growth of copper and zinc dendritic deposits under the galvanostatic electrolysis conditions10.1016/j.jelechem.2015.04.031 ↗
14. Comparative morphological and crystallographic analysis of copper powders obtained under different electrolysis conditions10.1016/S1003-6326(19)65034-X ↗
15. Overpotential controls a morphology of electrolytically produced copper dendritic forms10.2298/JSC190522066N ↗
16. Features of hydrogen evolution during electrodeposition of loose deposits of copper, nickel and zinc10.1016/j.jelechem.2020.114230 ↗
17. Facile synthesis of silver nanostructures by using various deposition potential and time: A nonenzymetic sensor for hydrogen peroxide10.1016/j.matchemphys.2015.02.009 ↗
18. Effect of organic additives on synthesis of copper nano powders by pulsing electrolysis10.1016/j.powtec.2012.12.046 ↗
19. The effect of reversing current deposition on the apparent density of electrolytic copper powder10.2298/JSC0201061P ↗
20. Sutarno, Effect of pulse parameters on the particle size of copper powder electrodeposition10.1088/1757-899X/547/1/012020 ↗
21. Characterization and morphology of copper powder particles as a function of different electrolytic regimes10.1016/S1452-3981(23)15390-9 ↗
22. Copper nanopowder synthesis by electrolysis method in nitrate and sulfate solutions10.1016/j.powtec.2013.10.012 ↗
23. Using design of experiments in synthesis of ultra-fine copper particles by electrolysis10.1016/j.powtec.2013.01.032 ↗
24. Effect of jet flow between electrodes on power consumption and the apparent density of electrolytic copper powders10.1016/j.powtec.2018.11.078 ↗
25. Function of additives in electrolytic preparation of copper powder10.1016/j.hydromet.2006.03.010 ↗
26. Additives-assisted electrodeposition of fine spherical copper powder from sulfuric acid solution10.1016/j.powtec.2017.12.060 ↗
27. Electrochemical fabrication of shape-controlled copper hierarchical structures assisted by surfactants10.1155/2012/901842 ↗
28. Shape evolution and effect of organic additives in the electrosynthesis of Cu nanostructures10.1007/s10008-019-04360-z ↗
29. Production of copper powder by electrodeposition with different equilibrium crystal shape10.1007/s12666-020-02015-6 ↗
30. Inhibition effect of CTAB on electrodeposition of Cu in micro via: experimental and MD simulation investigations.10.1149/2.0651915jes ↗
31. Communication—fast bottom-up filling of high aspect ratio micro vias using a single CTAB additive10.1149/1945-7111/abbce5 ↗
32. Experimental analysis of the co-deposition of metal Cu and nano-sized SiC particles with CTAB in micro via filling10.1149/2.0771906jes ↗
33. Copper ion reduction catalyzed by chloride ions10.1016/S0022-0728(02)01050-1 ↗
34. Chloride ion catalysis of the copper deposition reaction10.1149/1.2044254 ↗
35. Influence of chloride anions on the mechanism of copper electrodeposition from acidic sulfate electrolytes10.1149/1.2434682 ↗
36. Copper foam structures with highly porous nanostructured walls10.1021/cm048887b ↗
37. Dendritic growth and morphology selection in copper electrodeposition from acidic sulfate solutions containing chlorides10.1021/jp8095456 ↗
38. Change in the physical characteristics of the dendritic zinc deposits in the stationary and pulsating electrolysis10.1016/j.jelechem.2016.11.063 ↗
39. Effect of parameters of pulsed potential mode on concentration changes in the bulk loose zinc deposit and its properties10.1134/S1023193518090070 ↗
40. The effect of hydrogen codeposition on the morphology of copper electrodeposits. I. The concept of effective overpotential10.1016/j.jelechem.2005.12.006 ↗
41. Copper deposits obtained by pulsating overpotential regime with a long pause and pulse duration from sulfated solutions10.2298/JSC190712128S ↗
42. Influence of the exchange current density and overpotential for hydrogen evolution reaction on the shape of electrolytically produced disperse forms10.5599/jese.707 ↗
43. Correlation between crystal structure and morphology of potentiostatically electrodeposited silver dendritic nanostructures10.1016/S1003-6326(18)64835-6 ↗
44. Application of the general theory of disperse deposits formation in an investigation of mechanism of zinc electrodeposition from the alkaline electrolytes10.1016/j.jelechem.2016.12.024 ↗
45. Dendrites and growth layers in the electrocrystallization of metals10.1016/0013-4686(60)87010-7 ↗
46. Influence of additives on copper electrodeposition on physical vapor Deposited (PVD) copper substrates10.1149/1.1572152 ↗
47. 3D porous copper films with large specific surface prepared by hydrogen bubble template10.14233/ajchem.2013.15640 ↗
48. Bockris · 2000 · 133310.1007/b113922 ↗
49. Solution chemistry-based nano-structuring of copper dendrites for efficient use in catalysis and superhydrophobic surfaces10.1039/C5RA22683J ↗