journal article·2023-02-01Open access

Microfibril Aramid-Nanocellulose Fiber-Based Hybrid Separator for High-Performance Lithium-Ion Batteries

Runjie Yang, Zegang Wu, Tingting Lu, Guoqing Yu, Fengqin Liu, Tao Hu, Hongliang Zhao

Abstract

The poor thermal stability and wettability of commercial polyolefin separators are safety hazards that limit the electrochemical performance of lithium-ion batteries (LIBs). In this work, a novel aramid-nanocellulose fiber-based hybrid separator (Aramid-NCF separator) was fabricated by an industrial one-step paper-making process. The separator showed excellent heat stability, suitable pore structure, and outstanding electrolyte wettability, with a contact angle close to 0°. The Aramid-NCF separator showed superior ionic conductivity of 5.491 × 10−4 S·cm−1 compared with an alumina-coated PE separator (PE-Al2O3 separator) (3.260 × 10−4 S·cm−1). LIBs with the Aramid-NCF separator also showed better C-rate performance, better cycling performance, and a higher capacity retention rate than batteries prepared with the PE-Al2O3 separator. A pouch battery with the Aramid-NCF showed a higher capacity retention rate (89.17% after 200 cycles at 0.5 C) than a pouch battery with the PE-Al2O3 separator (86.01% after 200 cycles at 0.5 C). Therefore, the Aramid-NCF separator is a promising candidate for next-generation LIBs.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Organic cathode materials for lithium-ion batteries: past, present, and future10.1002/aesr.202000044 ↗
2. Mesoporous cellulose nanocrystal membranes as battery separators for environmentally safer lithium-ion batteries10.1021/acsaem.9b00458 ↗
3. A review on the separators of liquid electrolyte Li-ion batteries10.1016/j.jpowsour.2006.10.065 ↗
4. Battery separators10.1021/cr020738u ↗
5. Characterization and performance evaluation of lithium-ion battery separators10.1038/s41560-018-0295-9 ↗
6. Why do batteries fail?10.1126/science.1253292 ↗
7. Hybrid thermal resistant electrospun polymer membrane as the separator of lithium ion batteries10.1016/j.matchemphys.2020.122780 ↗
8. Cross-linked fibrous composite separator for high performance lithium-ion batteries with enhanced safety10.1016/j.memsci.2017.01.015 ↗
9. Preparation of a high-purity ultrafine α-Al2O3 powder and characterization of an Al2O3-coated PE separator for lithium-ion batteries10.1016/j.powtec.2017.07.027 ↗
10. Thermally stable non-aqueous ceramic-coated separators with enhanced nail penetration performance10.1016/j.jpowsour.2019.04.046 ↗
11. A novel three-dimensional boehmite nanowhiskers network-coated polyethylene separator for lithium-ion batteries10.1016/j.ceramint.2020.12.164 ↗
12. Aqueous aluminide ceramic coating polyethylene separators for lithium-ion batteries10.1016/j.ssi.2019.115188 ↗
13. ZrO2 coating via e-beam evaporation on PE separators for lithium-ion batteries10.1007/s11581-020-03842-9 ↗
14. Ultrathin ZrO2-coated separators based on surface sol-gel process for advanced lithium ion batteries10.1016/j.memsci.2019.117368 ↗
15. Enhanced thermal stability and lithium ion conductivity of polyethylene separator by coating colloidal SiO2 nanoparticles with porous shell10.1016/j.jcis.2019.06.102 ↗
16. A paper-supported inorganic composite separator for high-safety lithium-ion batteries10.1016/j.memsci.2018.02.040 ↗
17. Sb2O3 modified PVDF-CTFE electrospun fibrous membrane as a safe lithium-ion battery separator10.1016/j.memsci.2018.11.041 ↗
18. Binder-Free, thin-film ceramic-coated separators for improved safety of lithium-ion batteries10.1021/acsomega.0c05037 ↗
19. Boehmite particle coating modified microporous polyethylene membrane: A promising separator for lithium ion batteries10.1016/j.jpowsour.2017.02.078 ↗
20. Enhanced the mechanical strength of polyimide (PI) nanofiber separator via PAALi binder for lithium ion battery10.1016/j.coco.2020.100607 ↗
21. Electrospun polyimide nanofiber-based nonwoven separators for lithium-ion batteries10.1016/j.jpowsour.2012.10.027 ↗
22. Cross-linked fibrous composite separator for high performance lithium-ion batteries with enhanced safety10.1016/j.memsci.2017.01.015 ↗
23. Hybrid thermal resistant electrospun polymer membrane as the separator of lithium ion batteries10.1016/j.matchemphys.2020.122780 ↗
24. Meltblown polyvinylidene difluoride as a Li-Ion battery separator10.1021/acsapm.1c00221 ↗
25. Recent developments of cellulose materials for lithium-ion battery separators10.1007/s10570-017-1421-8 ↗
26. Eco-friendly cellulose nanofiber paper-derived separator membranes featuring tunable nanoporous network channels for lithium-ion batteries10.1039/c2jm32415f ↗
27. Ultra-light cellulose nanofibril membrane for lithium-ion batteries10.1016/j.memsci.2019.117550 ↗
28. ZIF-67@Cellulose nanofiber hybrid membrane with controlled porosity for use as Li-ion battery separator10.1016/j.jechem.2020.04.057 ↗
29. Poly(p-phenylene terephthalamide) modified PE separators for lithium ion batteries10.1016/j.memsci.2019.03.071 ↗
30. Aramid nanofibers/polyphenylene sulfide nonwoven composite separator fabricated through a facile papermaking method for lithium ion battery10.1016/j.memsci.2019.117169 ↗
31. Preparation and characterization of regenerated cellulose films using borassus fruit fibers and an ionic liquid10.1016/j.carbpol.2016.12.051 ↗
32. Comprehensively-upgraded polymer electrolytes by multifunctional aramid nanofibers for stable all-solid-state Li-ion batteries10.1016/j.nanoen.2019.104398 ↗