Solid Oxide Cell Reactor Model for Transient and Stationary Electrochemical H2O and CO2 Conversion Process Studies
Source abstract
Abstract
The ability of high-temperature solid oxide cell (SOC) electrochemical reactors to efficiently convert atmospheric carbon to high value chemicals for industrial and energy storage applications via {CO}2 and co-electrolysis makes them a key technology for active carbon utilisation. However, due to additional operational risks from thermochemical reactions on thermal management, limited experimental capacity, and relative novelty, {CO}2 and co-electrolysis lag behind steam electrolysis in large-scale adoption. Here, a 1D+1D SOC model based on fundamental first principles considering three-dimensional heat transfer was improved via a unique method for representing co-electrolysis electrochemistry, solving with low computational effort. Validation against experimental data for two compositions and pressures, showed high levels of accuracy with respect to characteristic cell voltages, temperatures, and outlet compositions. The model also showed {CO}2 reduction during co-electrolysis mainly occurred via reverse water gas shift, while {CO}2 electrolysis still accounted for up to 35% of the total share. Pressurised co-electrolysis operation promotes exothermic methanation, causing pronounced heating of the reactor, consequently reducing the isothermal current density. Therefore, low to moderate pressurisation is likely most suited for coupling with downstream synthesis processes to avoid the installation of unnecessarily large systems and associated high costs.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Chemical Looping and Thermochemical Processes · Catalysis and Oxidation Reactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. IEA · 12.07.2024
2. A review of solid oxide steam-electrolysis cell systems: thermodynamics and thermal integration10.1016/j.apenergy.2022.120145 ↗
3. Experimental analysis of the co-electrolysis operation under pressurized conditions with a 10 layer SOC stack10.1149/1945-7111/ab6820 ↗
4. Worldwide status of solid oxide fuel cell technology10.1149/09601.0001ecst ↗
5. High-temperature co-electrolysis: a versatile method to sustainably produce tailored syngas compositions10.1149/2.0581913jes ↗
6. Demonstration and scale-up of high-temperature electrolysis systems10.1002/fuce.202300059 ↗
7. Influence of heat transfer on thermal stress development in solid oxide fuel cells: a review
8. Syngas production via high-temperature coelectrolysis of steam and carbon dioxide10.1115/1.2971061 ↗
9. Analysis of pressurized operation of 10 layer solid oxide electrolysis stacks10.1016/j.ijhydene.2018.12.168 ↗
10. Simplified versus detailed solid oxide fuel cell reactor models and influence on the simulation of the design point performance of hybrid systems10.1115/1.1719029 ↗
11. Hierarchical modeling of solid oxide cells and stacks producing syngas via H2O/CO2 Co-electrolysis for industrial applications10.1016/j.apenergy.2018.08.122 ↗
12. Dynamic modelling of a direct internal reforming solid oxide fuel cell stack based on single cell experiments10.1016/j.apenergy.2019.05.053 ↗
13. Modeling and analysis of cross-flow solid oxide electrolysis cell with oxygen electrode/electrolyte interface oxygen pressure characteristic for hydrogen production10.2139/ssrn.3987808 ↗
14. 2D thermal modeling of a solid oxide electrolyzer cell (SOEC) for syngas production by H2O/CO2 co-electrolysis10.1016/j.ijhydene.2012.01.072 ↗
15. Operation strategies for a flexible megawatt scale electrolysis system for synthesis gas and hydrogen production with direct air capture of carbon dioxide10.1039/D2SE01473D ↗
16. High-temperature electrolysis for large-scale hydrogen production from nuclear energy—Experimental investigations10.1016/j.ijhydene.2009.10.045 ↗
17. Experimental validation of two-dimensional H2O and CO2 co-electrolysis modeling10.1002/fuce.201300214 ↗
18. A new framework for physically based modeling of solid oxide fuel cells10.1016/j.electacta.2007.08.030 ↗
19. Transient reversible solid oxide cell reactor operation—experimentally validated modeling and analysis10.1016/j.apenergy.2018.09.186 ↗
20. 2023
21. Modelica - an international effort to design the next generation modeling language10.1016/S1474-6670(17)43628-7 ↗
22. Accessed 12.07.2024
23. A new approach to modeling solid oxide cell reactors with multiple stacks for process system simulation10.1149/1945-7111/ac7009 ↗
24. Chapter 6 - transport processes in microfluidic applications
25. Anode-supported intermediate temperature direct internal reforming solid oxide fuel cell. I: model-based steady-state performance10.1016/j.jpowsour.2004.06.040 ↗
26. Modeling of solid oxide fuel cells for dynamic simulations of integrated systems10.1016/j.applthermaleng.2009.10.007 ↗
27. Bejan · 2013
28. Physical principles for the calculation of equilibrium potential for co-electrolysis of steam and carbon dioxide in a solid oxide electrolyzer cell (SOEC)10.1016/j.electacta.2014.09.144 ↗
29. Pressurized operation of solid oxide electrolysis stacks: an experimental comparison of the performance of 10-layer stacks with fuel electrode and electrolyte supported cell concepts10.1016/j.jpowsour.2020.228682 ↗
30. SOFC modeling and parameter identification by means of impedance spectroscopy10.1149/1.3247567 ↗
31. Deconvolution of electrochemical impedance spectra for the identification of electrode reaction mechanisms in solid oxide fuel cells10.1023/A:1020599525160 ↗
32. Evaluation and modeling of the cell resistance in anode-supported solid oxide fuel cells10.1149/1.2801372 ↗
33. Electrochemical impedance analysis of symmetrical Ni/Gadolinium-Doped Ceria (CGO10) electrodes in electrolyte-supported solid oxide cells10.1149/2.0051913jes ↗
34. Experimental analysis of the influence of elevated operating pressures on solid oxide cell stacks during steam, co- and CO2 electrolysis10.18419/opus-1214810.18419/opus-12148 ↗
35. Comparison of a solid oxide cell with nickel/gadolinium-doped ceria fuel electrode during operation with hydrogen/steam and carbon monoxide/carbon dioxide10.1002/fuce.202300060 ↗
36. Deconvolution of gas diffusion polarization in Ni/Gadolinium-doped ceria fuel electrodes10.1149/1945-7111/ac3d02 ↗
37. Transient operation strategies for MW-Scale SOC systems10.1149/09101.2571ecst ↗
38. Multicomponent gas diffusion in porous electrodes10.1149/2.0911506jes ↗
39. A review of solid oxide fuel cell (SOFC) dynamic models10.1021/ie801664j ↗
40. Wolfram · 2013
41. Microstructure degradation of Ni/CGO anodes for solid oxide fuel cells after long operation time using 3D reconstructions by FIB tomography10.1039/C7CP02186K ↗
42. Characterisation of a 10-Layer SOC stack under pressurised CO2 electrolysis operation10.1149/MA2022-02491950mtgabs ↗
43. Performance and limitations of nickel-doped chromite anodes in electrolyte-supported solid oxide fuel cells10.1002/cssc.202100330 ↗
44. High electrochemical activity of the oxide phase in model ceria-Pt and ceria-Ni composite anodes10.1038/nmat3184 ↗
45. Sulfur poisoning of electrochemical reformate conversion on nickel/gadolinium-doped ceria electrodes10.1021/acscatal.7b02177 ↗
46. Selective high-temperature CO2 electrolysis enabled by oxidized carbon intermediates10.1038/s41560-019-0457-4 ↗
47. How the surface state of nickel/gadolinium-doped ceria cathodes influences the electrochemical performance in direct CO2 electrolysis10.1016/j.jcat.2021.10.027 ↗
48. The influence of sulfur impurities in industrial COx gases on solid oxide electrolysis cell (SOEC) degradation10.1016/j.jpowsour.2023.232669 ↗