journal article·2025-02-01Open access

Mechanistic and Mitigation-Strategy Insights into NaCl and CaCl2 Contamination of Proton-Exchange-Membrane Water Electrolysis Using Continuum Modeling

Arthur R. Dizon, Adam Z. Weber

Abstract

Cationic contaminants are detrimental to proton-exchange-membrane water electrolyzers (PEMWEs). To obtain insight, a 1-D, nonisothermal, multiphase continuum cell model including cationic contamination is developed. Simulations of steady-state cell performance predict decreased performance due to an increase in kinetic overpotential associated with the hydrogen-evolution reaction, which was attributed to decreased protonic-activity within the cathode catalyst layer from proton supplantation with contaminant cations. The accumulation and extent of cation exchange in the cathode catalyst layer depends on the operating current density due to migration. Simulations of cell recovery of potential suggest that a contaminated cell can recover approximately 78% (450 mV) with 24 h of constant current density operation at 2 A cm−2, with higher current densities accelerating reduced recovery times. Parametric studies show that anode-side acidification at lower current densities inhibit cation contaminant adsorption, and cathode-side acidification at larger current densities facilitate the expulsion of adsorbed cations; for a cathode-side pH of 6 and 5, the cell can recover an additional 10% and 100% performance, respectively. Overall, the model serves as a framework for modeling other aspects of PEMWE systems to address durability and performance aspects, which can assist in improving the viability of the technology.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Fuel Cells and Related Materials · Advanced battery technologies research · Advanced Battery Technologies Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. International Energy Agency · 2023
2. PEM electrolysis for production of hydrogen from renewable energy sources10.1016/j.solener.2004.09.003 ↗
3. Current status of water electrolysis for energy storage, grid balancing and sector coupling via power-to-gas and power-to-liquids: a review10.1016/j.rser.2017.09.003 ↗
4. A comprehensive review on PEM water electrolysis10.1016/j.ijhydene.2013.01.151 ↗
5. An overview of hydrogen production technologies10.1016/j.cattod.2008.08.039 ↗
6. Hydrogen as an energy carrier: prospects and challenges10.1016/j.rser.2012.02.028 ↗
7. (Re)defining clean hydrogen: from colors to emissions10.1149/2.F08224IF ↗
8. Murdoch · 2023
9. Membrane electrolyzers for impure-water splitting10.1016/j.joule.2020.09.020 ↗
10. Ion and water transport characteristics in membranes for polymer electrolyte fuel cells containing H+ and Ca2+ cations10.1149/1.1837890 ↗
11. The effect of impurity cations on the transport characteristics of perfluorosulfonated ionomer membranes10.1021/jp983762d ↗
12. New insights into perfluorinated sulfonic-acid lonomers10.1021/acs.chemrev.6b00159 ↗
13. The asymmetric effects of Cu2+ contamination in a proton exchange membrane fuel cell (PEMFC)10.1002/fuce.201900189 ↗
14. In situ metal ion contamination and the effects on proton exchange membrane fuel cell performance10.1016/j.jpowsour.2011.01.086 ↗
15. Cationic contamination effects on polymer electrolyte membrane fuel cell performance10.1149/1.3610986 ↗
16. Modeling the steady-state effects of cationic contamination on polymer electrolyte membranes10.1016/j.electacta.2008.09.058 ↗
17. Mathematical modelling of cation contamination in a proton-exchange membrane10.1002/fuce.200800044 ↗
18. PEMFC contaminant tolerance limit - foreign cations in ionomers10.1016/j.ijhydene.2011.01.143 ↗
19. PEMFC contamination model: foreign cation exchange with ionomer protons10.1016/j.jpowsour.2011.04.008 ↗
20. Theory of multicomponent phenomena in cation-exchange membranes: Part I. thermodynamic model and validation10.1149/1945-7111/ab6723 ↗
21. Coalescing cation selectivity approaches in ionomers10.1021/acsenergylett.3c00163 ↗
22. Membrane durability: physical and chemical degradation
23. The Fe3+ role in decreasing the activity of Nafion-bonded IrO2 catalyst for proton exchange membrane water electrolyser10.1016/j.ijhydene.2020.03.222 ↗
24. Long-term contamination effect of iron ions on cell performance degradation of proton exchange membrane water electrolyser10.1016/j.jpowsour.2019.226755 ↗
25. The effects of cationic impurities on the performance of proton exchange membrane water electrolyzer10.1016/j.jpowsour.2020.228617 ↗
26. CO2-assisted regeneration of a polymer electrolytewater electrolyzer contaminated with metal ion impurities10.1149/2.0851910jes ↗
27. The influence of ferric ion contamination on the solid polymer electrolyte water electrolysis performance10.1016/j.electacta.2015.01.140 ↗
28. The influence of sodium ion on the solid polymer electrolyte water electrolysis10.1016/j.ijhydene.2011.10.023 ↗
29. The dynamic-state effects of sodium ion contamination on the solid polymer electrolyte water electrolysis10.1016/j.jpowsour.2013.04.049 ↗
30. A review on PEM electrolyzer modelling: guidelines for beginners10.1016/j.jclepro.2020.121184 ↗
31. An engineering perspective on the future role of modelling in proton exchange membrane water electrolysis development10.1016/j.coche.2022.100829 ↗
32. Hydrogen safety aspects related to high-pressure polymer electrolyte membrane water electrolysis10.1016/j.ijhydene.2009.01.047 ↗
33. A comprehensive modeling method for proton exchange membrane electrolyzer development10.1016/j.ijhydene.2021.02.170 ↗
34. Numerical study of the impact of two-phase flow in the anode catalyst layer on the performance of proton exchange membrane water electrolysers10.1149/1945-7111/acc898 ↗
35. Mathematical modeling of high-pressure PEM water electrolysis10.1007/s10800-009-0031-z ↗
36. Hydrogen crossover in proton exchange membrane electrolysers: the effect of current density, pressure, temperature, and compression10.1016/j.electacta.2021.138085 ↗
37. Transient hydrogen crossover in dynamically operated PEM water electrolysis cells- a model-based analysis10.1016/j.jpowsour.2022.232582 ↗
38. Membrane degradation in PEM water electrolyzer: numerical modeling and experimental evidence of the influence of temperature and current density10.1016/j.ijhydene.2014.11.111 ↗
39. Dynamic neutron imaging and modeling of cationic impurities in polymer electrolyte water electrolyzer10.1149/1945-7111/abc83b ↗
40. Mass transport of binary electrolytes in membranes - concentration dependence for sodium chloride transport in cellulose acetate10.1021/i160029a007 ↗
41. Modeling transport in polymer-electrolyte fuel cells10.1021/cr020729l ↗
42. Theory of Multicomponent phenomena in cation-exchange membranes: Part II. transport model and validation10.1149/1945-7111/ab6724 ↗
43. Modeling proton-exchange-membrane fuel cell performance/degradation tradeoffs with chemical scavengers10.1088/2515-7655/abb194 ↗
44. Understanding impacts of catalyst-layer thickness on fuel-cell performance via mathematical modeling10.1149/2.1161607jes ↗
45. Calculation of different physical constants of heterogen substances I Dielectric constants and conductibility of mixtures from isotrop substances10.1002/andp.19354160802 ↗
46. On the origin and application of the bruggeman correlation for analysing transport phenomena in electrochemical systems10.1016/j.coche.2016.02.006 ↗
47. Influence of ionomer content in IrO2/TiO2 electrodes on PEM water electrolyzer performance10.1149/2.0231611jes ↗
48. Structure-transport relationship of perfluorosulfonic-acid membranes in different cationic forms10.1016/j.electacta.2016.10.096 ↗
49. Performance losses and current-driven recovery from cation contaminants in PEM water electrolysis10.1149/1945-7111/ad576b ↗
50. Resistor-network modeling of ionic conduction in polymer electrolytes10.1016/j.electacta.2015.03.126 ↗
51. Method-practices and pitfalls in voltage breakdown analysis of electrochemical energy-conversion systems10.1149/1945-7111/abf061 ↗
52. How to minimise hydrogen evolution on carbon based materials?10.1149/1945-7111/ac67f7 ↗