Deep U.V. Hardening of Positive Photoresist Patterns
Source abstract
Abstract
Thermal deformation of positive photoresist patterns during high temperature treatments is significantly reduced by flood exposure of the photoresist with a low pressure mercury lamp containing deep UV at . Patterns formed in the positive photoresists AZ‐1470, AZ‐1350J, AZ‐2400, Hunt 204, KTI II and Kodak 809, after exposure with a low pressure Hg lamp, withstood a 180° C bake for 30 minutes while retaining their linewidth and standing wave pattern on the sidewall of the resist lines. Flood exposure of the photoresist patterns with near UV had the opposite effect. The stability of the patterns towards thermal deformation after deep UV exposure was found to be due to the formation of an outer skin of higher polymerization. If the skin is removed using an oxygen plasma the underlying photoresist behaves similarly to samples which received only near UV exposure. Positive resist solubility properties in acetone and AZ thinner were also studied.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Advancements in Photolithography Techniques · Advanced Surface Polishing Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Xerox Palo Alto Research Center, Integrated Circuit Laboratory, Palo Alto, California 94304
References
Reference metadata was not supplied for this record.