journal article·2016

Increased Anodic Performance of La0.5Sr0.5Mn0.9Al0.1O3by Doping with Co for Solid Oxide Fuel Cells Using Dry C3H8Fuel

Audi Majdan Kamarul Bahrain, Shintaro Ida, Tatsumi Ishihara

Publisher page

Abstract

Effects of Co and Al co-doping to La 0.5 Sr 0.5 MnO 3 (LSM55) for anode were studied and it was found that doping Co for Mn site is effective for decreasing anodic IR loss leading to increased power density. XRD measurement suggests that Co substituted Mn site over wide composition range and up to 40 mol% partial substitution of Co in LaMnO 3 structure was successfully performed. The maximum power density was increased by doping Co for LSM doped with 10 mol% Al for both H 2 and C 3 H 8 fuel. In particular, the smallest IR loss and anodic overpotential were achieved when 20 mol% Co was co-doped. The maximum power density of the cell using La 0.5 Sr 0.5 Mn 0.7 Al 0.1 Co 0.2 O 3 was achieved at 953 and 246 mW/cm 2 for H 2 and C 3 H 8 fuel at 1273 and 1173 K, respectively. Increase in power density can be assigned to the increased surface activity to the electrochemical oxidation by doping Co. Although stability of LSM perovskite structure is still insufficient in dry C 3 H 8 atmosphere, doping Al is effective for increasing stability and so co-doping Al and Co to Mn site of LaMnO 3 is effective for decreasing anodic overpotential for direct C 3 H 8 type SOFC.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Electronic and Structural Properties of Oxides · Magnetic and transport properties of perovskites and related materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. 10.1016/j.ijhydene.2013.07.07710.1016/j.ijhydene.2013.07.077 ↗
2. 10.1016/j.jpowsour.2010.10.00710.1016/j.jpowsour.2010.10.007 ↗
3. 10.1016/j.jpowsour.2007.08.01110.1016/j.jpowsour.2007.08.011 ↗
4. 10.1016/j.ssi.2006.07.01210.1016/j.ssi.2006.07.012 ↗
5. 10.1039/c0ee00166j10.1039/c0ee00166j ↗
6. 10.1016/S0021-9517(02)00121-510.1016/S0021-9517(02)00121-5 ↗
7. 10.1002/adma.20080242810.1002/adma.200802428 ↗
8. Irvine J. T. S. , in Perovskite Oxide for Solid Oxide Fuel Cell: Fuel Cells and Hydrogen Energy, Ishihara T. , Editor, p. 169, Springer, New York (2009).
9. 10.1002/fuce.20080001810.1002/fuce.200800018 ↗
10. 10.1016/j.jpowsour.2011.09.08810.1016/j.jpowsour.2011.09.088 ↗
11. 10.1038/nmat87110.1038/nmat871 ↗
12. 10.1016/j.ssi.2010.02.01010.1016/j.ssi.2010.02.010 ↗
13. 10.1039/C3RA42666A10.1039/C3RA42666A ↗
14. 10.1126/science.112587710.1126/science.1125877 ↗
15. 10.1021/ja206278f10.1021/ja206278f ↗
16. 10.1002/adma.20110485210.1002/adma.201104852 ↗
17. 10.1038/srep1812910.1038/srep18129 ↗
18. 10.1021/cm803364310.1021/cm8033643 ↗
19. 10.1149/1.234483010.1149/1.2344830 ↗
20. 10.1016/S0167-2738(99)00318-510.1016/S0167-2738(99)00318-5 ↗
21. 10.1007/s10008-016-3356-710.1007/s10008-016-3356-7 ↗
22. 10.1016/j.matlet.2005.01.03810.1016/j.matlet.2005.01.038 ↗
23. 10.1107/S056773947600155110.1107/S0567739476001551 ↗
24. 10.1016/j.jmmm.2009.01.01510.1016/j.jmmm.2009.01.015 ↗
25. 10.1016/j.physb.2016.02.00710.1016/j.physb.2016.02.007 ↗
26. 10.1016/j.ssi.2006.02.05310.1016/j.ssi.2006.02.053 ↗
27. 10.1016/j.jpowsour.2004.12.02910.1016/j.jpowsour.2004.12.029 ↗
28. 10.1016/j.jallcom.2008.10.05610.1016/j.jallcom.2008.10.056 ↗
29. 10.1016/j.jcat.2014.10.01810.1016/j.jcat.2014.10.018 ↗
30. 10.1016/j.tca.2008.04.01510.1016/j.tca.2008.04.015 ↗
31. 10.1149/1.306597110.1149/1.3065971 ↗
32. 10.1016/j.jallcom.2012.07.01210.1016/j.jallcom.2012.07.012 ↗
33. 10.1149/1.324010110.1149/1.3240101 ↗
34. 10.1016/j.jpowsour.2010.12.05310.1016/j.jpowsour.2010.12.053 ↗
35. 10.1039/c2ee21499g10.1039/c2ee21499g ↗
36. 10.1021/jp037839w10.1021/jp037839w ↗
37. 10.1016/j.jpowsour.2005.09.03610.1016/j.jpowsour.2005.09.036 ↗
38. 10.1051/jp4:200131310.1051/jp4:2001313 ↗
39. 10.1149/1.177418410.1149/1.1774184 ↗