Incorporating MXene with Redox Carriers on Capacitive Carbon Cloth-Based Freestanding Electrodes for Power Applications
Source abstract
Abstract
Battery-like organic materials including quinone-based electrodes with electrochemical activity have been extensively investigated for their use as electrode materials in energy storage devices due to their economic competitiveness and sustainable benefits. However, the intrinsic electrical insulating nature of organic quinones and their electrochemical reactivity limit power capability and stability upon charge/discharge cycling, respectively. Here, we report the preparation of a concentric layered architecture, MXene/Anthraquinone/Carbon Cloth (M/AQ/CC), by physisorption of anthraquinone onto the surface of carbon cloth via non-covalent π–π interactions, followed by dipping in exfoliated MXene suspension. The M/AQ/CC electrode, with a high mass loading (18.2 mg cm−2), delivered a capacity of 46 mAh g−1 (about 1 mAh cm−2 areal capacity or 6 mAh ml−1 volume) at 0.5 A g−1, with good rate performance and an enhanced cyclability over 5 k cycles. This simple preparation method can also be applied to incorporate MXene with a series of alternative organic redox carriers on freestanding carbon cloth, including thionin acetate and anthraquinone-2-sulfonate. The improvement in electrochemical performance highlights an efficient approach to store more charges via redox reactions from organic quinones pi-stacked at carbon surfaces, thanks to a protective MXene shield that stabilizes the Faradaic behavior of quinones over repetitive charge-discharge processes. The simplicity and versatility of this method should enable design of many advanced electrode materials based on MXene/quinones/carbon cloth for power devices.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: MXene and MAX Phase Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. On the challenge of developing advanced technologies for electrochemical energy storage and conversion10.1016/j.mattod.2014.02.014 ↗
2. Carbons and electrolytes for advanced supercapacitors10.1002/adma.201304137 ↗
3. Multidimensional materials and device architectures for future hybrid energy storage10.1038/ncomms12647 ↗
4. Materials for electrochemical capacitors10.1038/nmat2297 ↗
5. Latest advances in supercapacitors: from new electrode materials to novel device designs10.1039/C7CS00205J ↗
6. Electrochemical capacitors: mechanism, materials, systems, characterization and applications10.1039/C5CS00580A ↗
7. Challenges facing lithium batteries and electrical double-layer capacitors10.1002/anie.201201429 ↗
8. Hierarchical 3D electrodes for electrochemical energy storage10.1038/s41578-018-0069-9 ↗
9. Sodium-Ion supercapacitors based on nanoporous pyroproteins containing redox-active heteroatoms10.1016/j.jpowsour.2016.08.114 ↗
10. High performance flexible double-sided micro-supercapacitors with an organic gel electrolyte containing a redox-active additive10.1039/C6NR04352F ↗
11. High-performance supercapacitor electrodes based on graphene hydrogels modified with 2-Aminoanthraquinone moieties10.1039/c1cp20980a ↗
12. Battery/supercapacitor hybrid via non-covalent functionalization of graphene macro-assemblies10.1039/C4TA03605K ↗
13. Redox-active organic sodium anthraquinone-2-sulfonate (AQS) anchored on reduced graphene oxide for high-performance supercapacitors10.1002/aenm.201802088 ↗
14. Molecular design strategies for electrochemical behavior of aromatic carbonyl compounds in organic and aqueous electrolytes10.1002/advs.201900431 ↗
15. Pseudocapacitance and excellent cyclability of 2,5-dimethoxy-1,4-benzoquinone on graphene10.1039/C6EE00793G ↗
16. Thionine functionalized 3D graphene aerogel: combining simplicity and efficiency in fabrication of a metal-free redox supercapacitor10.1002/aenm.201802869 ↗
17. A microporous covalent–organic framework with abundant accessible carbonyl groups for lithium-ion batteries10.1002/anie.201805540 ↗
18. Electromagnetic interference shielding with 2D transition metal carbides (MXenes)10.1126/science.aag2421 ↗
19. 25th anniversary article: mxenes: a new family of two-dimensional materials10.1002/adma.201304138 ↗
20. Achieving high pseudocapacitance of 2D titanium carbide (MXene) by cation intercalation and surface modification10.1002/aenm.201602725 ↗
21. Ultra-high-rate pseudocapacitive energy storage in two-dimensional transition metal carbides10.1038/nenergy.2017.105 ↗
22. A strategy for synthesis of carbon nitride induced chemically doped 2D MXene for high-performance supercapacitor electrodes10.1002/aenm.201703173 ↗
23. Transparent, flexible, and conductive 2D titanium carbide (MXene) films with high volumetric capacitance10.1002/adma.201702678 ↗
24. Stamping of flexible, coplanar micro-supercapacitors using MXene inks10.1002/adfm.201705506 ↗
25. Knittable energy storing fiber with high volumetric performance made from predominantly MXene nanosheets10.1039/C7TA08355F ↗
26. MXene: an emerging two-dimensional material for future energy conversion and storage applications10.1039/C7TA09094C ↗
27. 2D metal carbides and nitrides (MXenes) for energy storage10.1038/natrevmats.2016.98 ↗
28. Flexible MXene/carbon nanotube composite paper with high volumetric capacitance10.1002/adma.201404140 ↗
29. Highly flexible, freestanding supercapacitor electrode with enhanced performance obtained by hybridizing polypyrrole Chains with MXene10.1002/aenm.201600969 ↗
30. Alkali-induced 3D crinkled porous Ti3C2 MXene architectures coupled with NiCoP bimetallic phosphide nanoparticles as anodes for high-performance sodium-ion batteries10.1039/C9EE00308H ↗
31. Highly conductive Ti3C2Tx MXene hybrid fibers for flexible and elastic fiber-shaped supercapacitors10.1002/smll.201804732 ↗
32. Flexible, robust, and multifunctional electromagnetic interference shielding film with alternating cellulose nanofiber and MXene layers10.1021/acsami.9b19768 ↗
33. Controlled crumpling of two-dimensional titanium carbide (MXene) for highly stretchable, bendable, efficient supercapacitors10.1021/acsnano.8b02908 ↗
34. Ti3C2Tx MXene-reduced graphene oxide composite electrodes for stretchable supercapacitors10.1021/acsnano.9b10066 ↗
35. Size-refinement enhanced flexibility and electrochemical performance of MXene electrodes for flexible waterproof supercapacitors10.1016/j.jechem.2021.08.034 ↗
36. Crumpled MXene electrodes for ultrastretchable and high-area-capacitance supercapacitors10.1021/acs.nanolett.1c02071 ↗
37. Electrostatically anchored MXene-Thionine hybrid electrodes for a flexible supercapacitor to attain exceptional performance10.1016/j.cej.2023.147293 ↗
38. Thionine functionalized 3D graphene aerogel: combining simplicity and efficiency in fabrication of a metal-free redox supercapacitor10.1002/aenm.201802869 ↗
39. Ultra-simple and green two-step synthesis of sodium anthraquinone-2-sulfonate composite graphene (AQS/rGO) hydrogels for supercapacitor electrode materials10.1016/j.jallcom.2020.158472 ↗
40. Modifications of MXene layers for supercapacitors10.1016/j.nanoen.2020.104734 ↗
41. Optimization of redox-active anthraquinone as electrode and electrolyte materials in supercapacitors10.1016/j.electacta.2021.137809 ↗
42. Outstanding capacitive performance of ordered mesoporous carbon modified by anthraquinone10.1016/j.electacta.2017.10.164 ↗
43. Functional protection of exfoliated black phosphorus by noncovalent modification with anthraquinone10.1021/acsnano.8b01474 ↗
44. Tetrahydroxy-anthraquinone induced structural change of zeolitic imidazolate frameworks for asymmetric supercapacitor electrode material application10.1039/C9NJ00036D ↗
45. Simpler and greener grafting method for improving the stability of anthraquinone-modified carbon electrode in alkaline media10.1016/j.electacta.2014.05.155 ↗
46. Anthraquinone modification of microporous carbide derived carbon films for on-chip micro-supercapacitors applications10.1016/j.electacta.2017.06.037 ↗
47. Electrochemical study on an activated carbon cloth modified by cyclic voltammetry with polypyrrole/anthraquinone sulfonate and reduced graphene oxide as electrode for energy storage10.1016/j.eurpolymj.2018.04.018 ↗
48. Performance and stability of electrochemical capacitor based on anthraquinone modified activated carbon10.1016/j.jpowsour.2010.09.097 ↗
49. Stable p/n-Dopable conducting redox polymers for high-voltage pseudocapacitor electrode materials: structure–performance relationship and detailed investigation into charge-trapping effect10.1002/aenm.201701063 ↗
50. J.Hybrid capacitor with anthraquinone-grafted carbon as a battery-type electrode operating in a low pH aqueous salt solution10.1039/D0TA03158E ↗
51. Electrically controlled electron transfer and resistance switching in reduced graphene oxide noncovalently functionalized with thionine10.1039/c2jm32121a ↗