The Kinetics of the Corrosion of Low-Hafnium Zirconium in Aqueous Sulfuric Acid Solutions
Source abstract
Abstract
The rates of corrosion of low‐hafnium zirconium in aqueous sulfuric acid solutions, over the concentration range 9–97% by weight, have been studied. Corrosion was detected by measuring the concentration of zirconium in solution with a radioactive tracer, Zr 05 . The samples first were etched in an aqueous hydrofluoric‐nitric acid solution, then placed directly into the sulfuric acid solution. The initial corrosion followed a parabolic rate law which was followed by a constant rate. Corrosion during the constant reaction rate period was faster, by an order of magnitude or more, than rates reported in the literature (1–4) for unetched samples under similar conditions. This is thought to be due to the removal of the protective oxide film on etching and the subsequent growth of some less protective film in the sulfuric acid solution. The corrosion rate was found to be first‐order with respect to undissociated sulfuric acid over the concentration range 0.2–9 M , "undissociated sulfuric acid," [ by weight (5)]. An equation relating the corrosion rate and the concentration of undissociated sulfuric acid at 44°C and with pre‐etching, is: An approximate value for the activation energy determined over the temperature range 20°–72°C, is 7–8 kcal mole −1 . A discussion of possible mechanisms is given with suggestions for further research.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Nuclear Materials and Properties · Semiconductor materials and devices · Radioactive element chemistry and processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References
Reference metadata was not supplied for this record.