journal article·1982-09-01

Photoelectrochemical Characterization of the n ‐ InP / Room Temperature Molten Salt Electrolyte Interface

R. Thapar, J. DuBow, K. Rajeshwar

Publisher page

Abstract

Photoelectrochemical (PEC) characterization of the pyridinium chloride (BPC) interface was carried out using cyclic and linear sweep voltammetry, capacitance‐voltage measurements, and automated admittance spectroscopy. The surface energy levels of electrodes in mixtures were a sensitive function of electrolyte acidity. Capacitance‐voltage measurements in electrolytes having molar ratios varying between 0.8:1 and 2:1 revealed a systematic shift in the flatband potentials toward negative potentials in basic systems, an effect attributed to specified adsorption of Cl − ions on the electrode surface. The stability range of the electrolyte on was also dependent on electrolyte acidity, the cathodic current onset shifting to negative potentials with increasing basicity. Electrostatic effects at the interface are invoked to explain these trends. Cyclic voltammetry revealed that ferrocene could be photoelectrochemically oxidized on in basic systems. In acidic systems, however, no photoeffects were observed. These results could be rationalized under the framework of the simplified energy band model proposed by previous authors for the semiconductor/electrolyte interface. Uphill photo‐oxidation of anthracene (A) and diphenyl anthracene (DPA) could also be effected on electrodes in acidic (≥ ∼1.25:1 composition) electrolytes. Al‐though the general PEC behavior of the interface was entirely consistent with the simple model, specific interaction of electroactive species, such as A and DPA, with the electrode surface did result in departures from model predictions. These "anomalous" effects could be minimized by dilution of the electrolyte with toluene. Mass transport of electroactive species was also facilitated by the use of (50% v/v) mixtures. Performance parameters are presented for PEC cells constructed from the interface in conjunction with the above redox couples. The loss mechanisms in such cells are analyzed with the help of literature data on chloroaluminate‐organic solvent mixtures. Finally, admittance spectroscopy was carried out on the interface for determination and surface‐states characterization. Equivalent circuits were developed for this interface from, admittance data and various component values determined by procedures described in previous publications from this laboratory.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Electrochemical Analysis and Applications · Conducting polymers and applications · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Electrical Engineering, Colorado State University, Fort Collins, Colorado 80523

References

Reference metadata was not supplied for this record.