journal article·1992-09-01

Dry Etching of Al Alloy Films Using HBr Mixed Gases

K. Fujino, T. Oku

Publisher page

Abstract

Al/1%Si films were dry‐etched at 20°C using an or plasma. Conventional reactive ion etch equipment was used. Etch rates of the Al films and photoresist, self DC bias, and selectivities for photoresist and thermal oxide were studied as functions of RF power, gas pressure, gas flow rate ratio, and total gas flow rates. A 0.9 μm/min etch rate, a 6.8 photoresist selectivity, and a 18.9 thermal oxide selectivity were obtained for the former plasma. A 2.3 μm/min etch rate, a 7.7 photoresist selectivity, and a 45.5 thermal oxide selectivity were obtained for the latter plasma. Etched Al films showed highly anisotropic profiles with very slight etch residues for both plasma. Consequently, very high selectivities as well as high Al etch rates and anisotropy were obtained using containing gases.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Semiconductor materials and devices · Copper Interconnects and Reliability · Plasma Diagnostics and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Semiconductor Process Laboratory, 2‐13‐29 Kohnan, Minato‐ku, Tokyo 108, Japan

Canon Sales Company, Incorporated, 2‐13‐29 Kohnan, Minato‐ku, Tokyo 108, Japan

References

Reference metadata was not supplied for this record.