journal article·2022-09-09

Stretchable and Fast Composting Polyester Films with High-Performance Oxygen Barrier

Elmar Sehl, Renee L. Timmins, Dipannita Ghosh, Josef Breu, Seema Agarwal

ACS Applied Polymer Materials· Volume 4· Issue 9
Publisher page

Abstract

This work presents one of the fastest composting aliphatic–aromatic polyesters with a good balance of mechanical and barrier properties, making it a sustainable alternative for low-density polyethylene in packaging. The polyesters (PBxBDMyS) are prepared by melt polycondensation of 1,4-butanediol (B), 1,4-benzenedimethanol (BDM), and succinic acid (S). One composition exhibited a tensile strength of 20 ± 2 MPa, a modulus of 150 ± 8 MPa, and a very high elongation at break of 581 ± 46%. The low oxygen transmission rate (152 cm3·m–2·day–1·bar–1) measured at 65% relative humidity and 23 °C confirms excellent barrier performance. A 3 μm water-borne nanocomposite coating of glycol chitosan and sodium fluorohectorite further reduced the gas permeability to a value of 0.75 cm3·m–2·day–1·atm–1, which is competitive with materials suitable for demanding packaging applications such as poly(vinylidene chloride) while maintaining good mechanical properties and high stretchability. After studying the enzyme-catalyzed hydrolysis under controlled conditions, the full fragmentation, assimilation, and mineralization in thermophilic, aerobic composting could be confirmed in less than 5 weeks using a combination of different analytical methods. The mechanism of degradation was proven to be bulk degradation.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microplastics and Plastic Pollution · biodegradable polymer synthesis and properties · Recycling and Waste Management Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Macromolecular Chemistry II and Bavarian Polymer Institute, University of Bayreuth, Universitätsstraße 30, 95447 Bayreuth, Germany

Inorganic Chemistry I and Bavarian Polymer Institute, University of Bayreuth, Universittsstraße 30, 95447 Bayreuth, Germany

Funding

Deutsche Forschungsgemeinschaft

References (40)

Show source-provided references
1. Plastics Europe, Plastics - the Facts 2021. An analysis of European plastics production, demand and waste data. Plastics Europe, 2021. https://plasticseurope.org/wp-content/uploads/2021/12/AF-Plastics-the-facts-2021_250122.pdf (accessed July 20, 2022).
2. 10.1002/macp.20200001710.1002/macp.202000017 ↗
3. 10.1021/acs.macromol.0c0281410.1021/acs.macromol.0c02814 ↗
4. 10.1016/j.envpol.2019.11301110.1016/j.envpol.2019.113011 ↗
5. 10.1021/acs.est.6b0291710.1021/acs.est.6b02917 ↗
6. 10.1038/s41467-018-03825-510.1038/s41467-018-03825-5 ↗
7. 10.1038/s41598-018-36172-y10.1038/s41598-018-36172-y ↗
8. 10.1126/sciadv.170078210.1126/sciadv.1700782 ↗
9. 10.1021/acsami.1c1655710.1021/acsami.1c16557 ↗
10. 10.1021/acsami.9b0020910.1021/acsami.9b00209 ↗
11. 10.1126/science.aba947510.1126/science.aba9475 ↗
12. Endres, H.J.; Siebert-Raths, A.Technische Biopolymere: Rahmenbedingungen, Marktsitutation, Herstellung, Aufbau und Eigenschaften, Hanser Verlag, 2009; p 188.10.3139/9783446421042 ↗
13. 10.1002/gch2.20170004810.1002/gch2.201700048 ↗
14. 10.1016/j.wasman.2015.04.00610.1016/j.wasman.2015.04.006 ↗
15. 10.1016/j.chemosphere.2020.12587510.1016/j.chemosphere.2020.125875 ↗
17. 10.1021/acsomega.7b0051710.1021/acsomega.7b00517 ↗
18. 10.3390/ijms1010426710.3390/ijms10104267 ↗
19. 10.1002/mame.20180033310.1002/mame.201800333 ↗
20. 10.1016/j.polymertesting.2020.10700910.1016/j.polymertesting.2020.107009 ↗
21. 10.1021/acsapm.1c0116910.1021/acsapm.1c01169 ↗
22. 10.1002/adma.20120295110.1002/adma.201202951 ↗
23. 10.1038/s41467-019-10362-210.1038/s41467-019-10362-2 ↗
24. 10.1021/acsnano.0c0163310.1021/acsnano.0c01633 ↗
25. 10.1002/polb.1070810.1002/polb.10708 ↗
26. 10.1002/app.4442410.1002/app.44424 ↗
27. 10.1021/acsomega.0c0140510.1021/acsomega.0c01405 ↗
28. 10.1016/S0376-7388(00)80877-710.1016/S0376-7388(00)80877-7 ↗
29. 10.1021/bm201438m10.1021/bm201438m ↗
30. 10.1021/nl103047k10.1021/nl103047k ↗
31. 10.1039/C4RA01621A10.1039/C4RA01621A ↗
32. 10.1021/acs.macromol.7b0070110.1021/acs.macromol.7b00701 ↗
33. 10.1021/acsapm.0c0045610.1021/acsapm.0c00456 ↗
34. 10.1016/j.clay.2009.11.01410.1016/j.clay.2009.11.014 ↗
35. 10.1128/MMBR.64.3.461-488.200010.1128/MMBR.64.3.461-488.2000 ↗
36. 10.1021/la304453h10.1021/la304453h ↗
37. 10.1002/pts.63410.1002/pts.634 ↗
38. Müller K. · Kunststoffe Int. · 2011 · 101 · 62
39. 10.1002/app.1991.07042062610.1002/app.1991.070420626 ↗
40. 10.1002/pts.62110.1002/pts.621 ↗